Get Your Dodge Caliber Running Smoothly Again
Is your Dodge Caliber, Jeep Patriot, or Compass giving you headaches? A persistent check engine light, sudden stalling, rough idling, or a complete no-start condition can be incredibly frustrating. These are classic signs that the brain of your vehicle, the Engine Control Module (ECM), is failing. Instead of facing a costly and complicated trip to the dealership, you have found the simple, reliable, and affordable solution. This Engine Control Module arrives at your door fully programmed to your vehicle’s specific VIN and mileage, making it a true Plug & Play fix.
Common Symptoms & Your Direct Solution
A failing ECM can cause a wide range of confusing issues. If you’re experiencing any of the following, this part is the definitive solution you need:
- Check Engine Light (CEL): Often with communication error codes like U0100, or multiple false sensor codes.
- Engine Stalling: The engine may cut out unexpectedly while driving or when coming to a stop.
- No-Start Condition: The engine cranks but refuses to start, even with a good battery and starter.
- Poor Performance: Noticeable loss of power, hesitation during acceleration, and decreased fuel economy.
- Erratic Shifting: If you have an automatic transmission, you may experience harsh or unpredictable shifting.
Replacing your faulty computer with this pre-programmed 2007-2010 Dodge Caliber Engine Control Module will resolve these issues and restore your vehicle’s original performance and reliability.
Features & Benefits
- โ 100% Plug & Play: This unit is ready for installation right out of the box. No expensive dealer programming or special tools are required. Simply disconnect the old unit and plug this one in.
- โ VIN-Specific Programming: We flash the module with your vehicle’s unique VIN and mileage, ensuring perfect communication with all other onboard systems.
- โ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, including 05150471AA, 68043260AC, 68028205AB, and many more. Please see the full list to confirm your part number.
- โ Affordable Dealership Alternative: Get your vehicle fixed for a fraction of the cost of a new computer from the manufacturer, without sacrificing quality or reliability.
- โ Peace of Mind Protection: This unit is backed by our one-year replacement warranty.
An Expert’s Note on Chrysler Electronics
As a technician with over two decades of experience, I’ve seen countless Chrysler, Dodge, and Jeep vehicles from this era with frustrating electronic issues. The GPEC (Global Powertrain Engine Controller) used in the Caliber, Patriot, and Compass is a solid unit, but like any complex electronic component, it can fail over time due to heat cycles and vibration. The most common failure is a breakdown in communication, leading to a cascade of error codes that can send you or your mechanic on a wild goose chase. This pre-programmed 2007-2010 Dodge Caliber Engine Control Module eliminates that diagnostic nightmare. It’s the most efficient way to get a definitive fix and get your car back on the road with confidence.
Frequently Asked Questions
What information do you need to program the module?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your dashboard (visible through the windshield) or on your vehicle’s registration or insurance documents.
What does “Plug & Play” really mean?
It means the module is ready for installation without any additional steps. Once you receive it, you simply disconnect your battery, swap your old ECM with this one, and reconnect the battery. No trip to a mechanic or dealership for programming is necessary.
Is this compatible with my Jeep Patriot or Compass?
Yes. The Dodge Caliber, Jeep Patriot, and Jeep Compass from 2007-2010 share the same platform and electronics. This module is compatible with all three models as detailed in the fitment list. It is a direct-fit solution for these vehicles.
Do I need to send my old computer back?
No core charge or return is required for this part. You can keep or responsibly dispose of your old module.
How do I find my original part number?
Your original part number is printed on a sticker on the housing of your current ECM. You may need to unbolt it to see the sticker clearly. Matching it to one of the numbers in our compatibility list ensures a perfect fit.
What if this doesn’t fix my problem?
While this 2007-2010 Dodge Caliber Engine Control Module is the solution for the vast majority of electronic powertrain issues, we always recommend proper diagnostics. If the part doesn’t resolve your issue, you may have a separate problem (e.g., wiring, a sensor). Our one-year warranty covers the module itself for replacement.