End Your Engine Troubles and Get Back on the Road
Is your Dodge Caliber, Jeep Patriot, or Compass giving you headaches? A persistent check engine light, poor performance, stalling, or a complete no-start condition can be incredibly frustrating, leaving you stranded and stressed. These are classic signs of a failing Engine Control Module (ECM), the brain of your vehicle. Instead of facing an expensive and time-consuming trip to the dealership, take control of the repair with our direct-fit, pre-programmed 2007-2010 Dodge Caliber ECM. This is the simple, reliable solution to restore your vehicle’s performance and your peace of mind.
Common Symptoms & Your Direct-Fit Solution
A faulty ECM can cause a wide range of confusing issues. If you’re experiencing any of the following, this module is the definitive solution:
- Persistent Check Engine Light (CEL)
- Engine cranks but will not start
- Poor or erratic automatic transmission shifting
- Stalling or misfiring for no apparent reason
- Noticeable drop in fuel economy
- Communication errors with diagnostic scan tools (e.g., DTC P0601, P0606)
Our pre-programmed 2007-2010 Dodge Caliber ECM is designed to solve these problems permanently. It arrives at your door ready for a simple, straightforward installation, getting your daily driver back to dependable service without the hassle.
Features & Tangible Benefits
- ✔ Completely Plug & Play: No complicated procedures or special tools required. This unit is ready to install right out of the box, saving you time and frustration.
- ✔ Programmed to Your VIN: We flash the module with your vehicle’s specific VIN and mileage, ensuring perfect communication with all onboard systems. This eliminates the need for an expensive dealer visit for programming.
- ✔ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, ensuring it’s the correct component for your vehicle. See the full compatibility list below.
- ✔ Restored Performance & Efficiency: A properly functioning ECM ensures your engine runs exactly as the manufacturer intended, restoring lost power and fuel economy.
- ✔ One-Year Replacement Warranty: This unit is backed by our one-year replacement warranty, giving you confidence and security in your purchase.
An Expert’s Note on ‘Plug & Play’ Simplicity
“Over my 20 years in the garage, I’ve seen countless vehicle owners get stuck between a rock and a hard place. They correctly diagnose a bad ECM, but then face the dealership’s high prices for programming a new unit. Our Plug & Play solution was born from that frustration. We handle all the complex programming on our end, using your VIN to create a module that is truly a direct swap. You’re not just buying a part; you’re buying a complete, hassle-free solution that empowers you to fix your car correctly and affordably. It’s the smartest way to tackle an ECM replacement.”
Guaranteed Fitment For:
This 2007-2010 Dodge Caliber ECM is a direct replacement for the following vehicles and part numbers:
- DODGE CALIBER: 2007-2010
- JEEP COMPASS: 2007-2010
- JEEP PATRIOT: 2007-2010
Replaces Part Numbers: 05150471AA, 05150523AA, 68043260AA, 68043260AB, 04692101AD, 04692101AE, 04692101AF, 68043260AC, 68043260AD, 68043261AC, 68043261AA, 68043261AB, 68070011AA, 68071022AA, 05033359AJ, 05187817AF, 68000107AF, 68026147AA, 68026147AC, 68028201AA, 68028201AC, 68028205AB, 68044228AA
Frequently Asked Questions
What does “Plug & Play” actually mean?
It means the engine computer will arrive at your door fully programmed to your vehicle’s specific VIN. All you have to do is disconnect the battery, remove your old ECM, install this one, and reconnect the battery. No additional programming or dealer visits are required.
Do I need to send my old computer (core) back?
No, there is no core charge or requirement to return your old module. You can keep it or dispose of it as you see fit.
Is this compatible with my Jeep Patriot or Compass?
Yes. The Dodge Caliber, Jeep Patriot, and Jeep Compass from 2007-2010 were built on the same platform and share this Engine Control Module. As long as your vehicle falls within this year range, this part is a compatible, direct-fit solution.
How do I provide my VIN and mileage?
After you place your order, you will be prompted to provide your vehicle’s information. We cannot program and ship your module without the VIN, so please ensure it is accurate.
What tools are needed for installation?
Installation is typically very straightforward. You will generally only need basic hand tools, such as a socket set (commonly 8mm or 10mm sockets) to disconnect the battery and unbolt the ECM connectors and mounting brackets. The entire process can often be completed in under 30 minutes.