Is Your Trusty Dodge Ram Letting You Down?
There’s nothing more frustrating than turning the key on your workhorse truck and getting nothing but a sputter, a stall, or a persistent Check Engine light. Your 1996 Dodge Ram was built for tough jobs and reliability. When the Engine Control Module (ECM) starts to fail, it can bring your entire day, or even your business, to a grinding halt. You need a solution that’s as dependable and straightforward as your truck itself. This is it.
Common Symptoms & Your Solution
A failing engine computer can cause a wide range of confusing issues that might seem unrelated. If your truck is experiencing any of the following, a faulty module is the most likely culprit:
- Complete No-Start Condition: The engine cranks but will not fire up.
- Stalling and Rough Idle: The engine cuts out unexpectedly at stops or runs erratically.
- Poor Fuel Economy & Performance: A noticeable drop in MPG and a feeling of sluggishness or hesitation.
- Harsh or Incorrect Shifting (Automatic Transmission): The ECM plays a critical role in controlling shift points.
- Check Engine Light with Communication Codes: Diagnostic trouble codes (DTCs) like P0600, P0601, or P0605 often point directly to an internal computer failure.
This pre-programmed Engine Control Module is the definitive solution. It’s not just a part; it’s a restoration of your truck’s core reliability. We handle all the complex programming, so you get a component that is ready for installation right out of the box, specifically matched to your vehicle’s VIN. For a truck that works as hard as you do, you need a dependable brain, and this 1996 Dodge 2500 5.9L ECM is the answer.
Features & Benefits
- ✔ True Plug & Play Installation: This unit arrives pre-programmed to your truck’s specific VIN and mileage. No expensive trips to the dealer or locksmith are required.
- ✔ Get Back on the Road Fast: The simple, direct-fit design means you can install it in your driveway with basic hand tools, minimizing downtime.
- ✔ Restore Peak Performance: A new ECM corrects faulty fuel, spark, and transmission signals, bringing back the power and efficiency you depend on.
- ✔ Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, including 56040931, 04886735, 56040780, and more.
- ✔ Peace of Mind Guaranteed: This unit is backed by our one-year replacement warranty.
From the Mechanic’s Bay: “I’ve seen countless second-gen Dodge Rams come in with weird, hard-to-diagnose problems. More often than not, it traces back to the original ECM. The 5.9L Magnum is a legendary engine, but it needs precise signals to run right. A generic computer from a salvage yard is a gamble; it won’t have the right programming for the transmission or security system. Getting a properly programmed 1996 Dodge 2500 5.9L ECM isn’t just a repair—it’s the single best thing you can do to ensure that classic V8 runs strong for years to come.”
Don’t let a bad computer sideline your reliable truck. This is the most effective and straightforward way to solve your engine management problems and restore the dependable performance you need every single day. The correct fix for your 1996 Dodge 2500 5.9L ECM is right here.
Frequently Asked Questions
Is this ECM really “Plug and Play”?
Absolutely. We program the computer with the VIN and mileage you provide during checkout. This ensures it communicates perfectly with your truck’s existing components and security system. All you have to do is disconnect the battery, swap the modules, and reconnect the battery. No further programming is needed.
Where is the ECM located on my 1996 Dodge truck?
On the 1996 Dodge Ram 1500, 2500, and 3500, the Engine Control Module is typically located on the passenger side of the firewall in the engine bay. It’s a silver metal box with three large electrical connectors.
Will this fix my transmission shifting issues?
In many cases, yes. The ECM controls the electronic solenoids in the automatic transmission. If the computer is sending faulty signals, it can cause hard shifts, delayed shifting, or failure to shift into certain gears. A new, correctly programmed ECM often resolves these issues.
What information do you need from me to program it?
We need your truck’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Do I need to send my old computer (core) back?
No core charge or return is required for this part, which saves you time and the hassle of return shipping.