HUMMER H2 Body Control Module 15198116 | VIN Programmed

End Your H2’s Electrical Headaches

Tired of unpredictable lights, locks, and security issues in your 2003-2007 Hummer H2? This OEM-quality Body Control Module arrives fully programmed to your vehicle’s VIN for a simple, plug-and-play fix. Restore full functionality and reliability without a costly trip to the dealership. Order today to get your H2 back to perfect working order!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-01130-265 Categories: ,
Guaranteed Safe Checkout

{
“title”: “2003-2007 Hummer H2 BCM Body Control Module 15198116“,
“long_description”: “

Is your Hummer H2 suffering from bizarre electrical problems?

n

If you’re dealing with flickering lights, unresponsive power windows, a malfunctioning security system, or an illuminated airbag light, a failing Body Control Module (BCM) is the most likely culprit. The BCM is the central computer for your vehicle’s body electronics, and when it fails, it can cause a wide range of frustrating issues. This VIN-programmed BCM, part number 15198116, is the definitive solution to restore full functionality to your 2003-2007 Hummer H2.

nn

n

Expert Pro Tip

n

Before you begin installation, always disconnect the negative terminal of your vehicle’s battery. This not only prevents accidental electrical shorts but also helps the vehicle’s systems perform a hard reset, which can clear out residual fault codes when the new BCM is connected.

n

nn

Symptoms of a Failing 2003-2007 Hummer H2 BCM

n

    n

  • ✔ Intermittent or non-working power windows, door locks, or interior/exterior lights.
  • n

  • ✔ HVAC system failures, such as a blower motor that won’t turn on or erratic temperature control.
  • n

  • ✔ An active airbag warning light, often accompanied by diagnostic trouble code (DTC) B1001.
  • n

  • ✔ Security system malfunctions, including random alarm activation or a no-start condition where the engine won’t crank.
  • n

  • ✔ Unexplained battery drain or strange grounding issues that are difficult to diagnose.
  • n

nn

Plug-and-Play Solution, No Dealer Required

n

Forget about expensive dealership visits and programming fees. We pre-program this module to your Hummer’s specific Vehicle Identification Number (VIN) before shipping. This ensures it communicates perfectly with your vehicle’s other computers right out of the box. The installation is a straightforward, plug-and-play process that takes just minutes. This module is a direct replacement for part numbers 15198116, 15116066, 10383536, 15136225, and many others, guaranteeing a perfect fit and function.

nn

Post-Installation Procedures

n

In most cases, the module works immediately. However, for some vehicles, a couple of simple procedures may be needed:

n

    n

  • Airbag System Sync: If the airbag light remains on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a professional scan tool. This syncs the new BCM with the airbag system.
  • n

  • Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor relearn might be necessary.
  • n

n

This high-quality replacement BCM is built to meet or exceed original equipment standards, ensuring long-lasting reliability for your Hummer H2. Plus, with our no-core-charge policy, you can keep your old part without any hassle. Get your Hummer’s electronics working like new again.

nn

Frequently Asked Questions

What does the Body Control Module do on a 2003-2007 Hummer H2?

The BCM acts as the main computer for your Hummer’s body-related functions. It controls the power windows, door locks, interior and exterior lights, security system, wipers, and HVAC climate controls.

Is this BCM ready to install right out of the box?

Yes. We pre-program the module to your vehicle’s VIN before it ships, making it a true plug-and-play installation with no additional dealership programming required.

Will this part fix my airbag light?

A faulty BCM is a common cause of an airbag light with code B1001. Replacing it often solves the issue, but you may need a technician with a high-level scan tool to perform an “SDM Key Setup” to sync the new module to the airbag system.

Where is the BCM located on a Hummer H2?

On the 2003-2007 Hummer H2, the Body Control Module is typically located on the left-hand (driver’s) side of the dashboard, under the steering column area.

Do I have to return my old BCM?

No. We do not require a core return for this part. You can keep your old module without any core charge or extra hassle.

“,
“short_description”: “

Restore Your Hummer’s Electronics Instantly

n

Fix frustrating electrical issues with this VIN-programmed Body Control Module for your 2003-2007 Hummer H2. It’s a plug-and-play solution for failing lights, locks, and HVAC controls. Order today for a fast, simple repair!

“,
“meta_description”: “Experiencing electrical issues? Our VIN-programmed 2003-2007 Hummer H2 BCM (15198116) is a direct-fit solution for your truck. Order now and fix it right!”,
“focus_keyword”: “2003-2007 Hummer H2 BCM”,
“image_meta”: {
“alt_text”: “Front view of the 2003-2007 Hummer H2 BCM Body Control Module, part 15198116, showing multiple electrical connector ports.”,
“image_title”: “2003-2007 Hummer H2 BCM 15198116 Replacement”,
“caption”: “OEM-quality replacement Body Control Module 15198116, pre-programmed for 2003-2007 Hummer H2.”,
“description”: “Detailed image of the Body Control Module for the 03-07 Hummer H2. This module controls body electronics and is a common fix for electrical failures in lights, locks, and HVAC systems.”
}
}

Conditions & Options

Programmed to your VIN GM: 15116066

Year
Genuine OEM

Yes

MPN

15198116

Interchange part number

Condition

Refurbished

PartNumber

591

Model

Hummer H2

Make

Year

2006

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , , , ,

Scroll to Top