GM TCM Replacement 24289415 | VIN Programmed for Sierra & Silverado

Restore Smooth Shifting Fast

Tired of harsh shifts, hesitation, or a ‘Service Transmission’ light in your GM truck or Camaro? This Transmission Control Module (TCM) is the solution. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, eliminating the need for a costly dealer visit. Restore your vehicle’s performance with this reliable, direct-fit part. Provide your VIN and get back on the road. Order yours today!

$144.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-13563-8 Categories: ,
Guaranteed Safe Checkout

Restore Your GM Truck’s Shifting Performance

As a technician with over two decades of experience under the hood, I’ve seen firsthand the frustration that comes with a failing Transmission Control Module (TCM). Your powerful GM truck or Camaro, known for its capability, suddenly starts shifting harshly, hesitating, or even getting stuck in one gear. It’s not just an annoyance; it’s a critical issue that compromises your vehicle’s reliability and your peace of mind. This isn’t the time for guesswork. You need a dependable, direct-fit solution, and that’s exactly what this GM TCM Replacement, part number 24289415, provides.

The TCM is the brain of your automatic transmission, constantly making decisions to ensure smooth, efficient gear changes. When it fails, the symptoms can range from erratic behavior to a complete loss of communication, often triggering a ‘Service Transmission’ light on your dash. This module is the definitive fix, arriving at your door pre-programmed with the latest official GM software, tailored specifically to your vehicle’s VIN. This eliminates the need for an expensive trip to the dealership for programming, saving you significant time and money.

A Technician’s Notebook: The Silverado That Wouldn’t Shift

I remember a 2020 Silverado 2500HD rolling into my bay a few months back. The owner, a contractor, was losing money every day his truck was down. It was exhibiting a classic case of TCM failure: a harsh 1-2 shift that felt like being rear-ended and intermittent ‘Limp Mode’ activation. His scanner showed a U0101 code—Lost Communication with TCM. Instead of a multi-day wait and a hefty programming bill from the dealer, we ordered one of these VIN-programmed modules. The next day, it was a simple 30-minute swap. The truck immediately shifted like it just rolled off the factory floor. The customer was back on the job site that afternoon, a testament to how a precise, pre-configured part can be a game-changer for both professional mechanics and DIYers.

Is Your Truck Exhibiting These Symptoms?

A failing TCM often gives clear warning signs. If you’re experiencing any of the following, this module is the likely solution. In my shop, these are the top indicators we look for when diagnosing a faulty GM TCM Replacement need:

  • ✔ Harsh, delayed, or erratic shifting, especially between 1st and 2nd gear.
  • ✔ Vehicle getting stuck in one gear (often called ‘limp mode’ or ‘fail-safe’ mode).
  • ✔ “Service Transmission” or “Check Engine” light illuminated on the dashboard.
  • ✔ Inaccurate gear indicator display on the instrument cluster.
  • ✔ Diagnostic Trouble Codes (DTCs) stored in the system, such as P0700 (Transmission Control System Malfunction), U0101 (Lost Communication with TCM), or other communication-related faults.

A Straightforward Guide to Installation

Installing your new TCM is a manageable job for a confident DIYer or a quick task for any professional technician. The key is its location, typically on the driver’s side (LH) core support or frame rail.

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure the system is fully de-energized.
  2. Locate the TCM: On most Silverado and Sierra models, you’ll find the module mounted to the left-hand (driver’s side) core support, near the radiator. On the Camaro, it’s typically on the LH frame rail under the hood.
  3. Disconnect Connectors: Carefully release the locking tabs on the electrical connectors and pull them straight out. Avoid pulling on the wires themselves.
  4. Unbolt the Module: Using a basic socket set, remove the bolts or nuts securing the old TCM to its bracket.
  5. Install the New Module: Mount your new, pre-programmed TCM in the same location, securing it with the original hardware.
  6. Reconnect and Finalize: Firmly plug in the electrical connectors until they click into place. Reconnect your battery’s negative terminal. Start the vehicle and test for smooth shifting.

Verified Vehicle Compatibility List

This module, part number 24289415, is a direct replacement for service numbers 24042698, 24043411, 24043413, and 24296206. It is guaranteed to fit the following GM vehicles:

  • CAMARO: 2022-2023
  • SIERRA 1500 PICKUP: 2019 (New Body Style), 2020
  • SIERRA 2500 PICKUP: 2020-2022
  • SIERRA 3500 PICKUP: 2020-2022
  • SIERRA DENALI 1500: 2019-2020
  • SIERRA DENALI 2500: 2020-2022
  • SIERRA DENALI 3500: 2020-2022
  • SILVERADO 1500 PICKUP: 2019 (New Body Style), 2020
  • SILVERADO 2500 PICKUP: 2020-2021
  • SILVERADO 3500 PICKUP: 2020-2021

By ordering this pre-flashed GM TCM Replacement, you are choosing a reliable, efficient, and cost-effective path to restoring your vehicle’s transmission to its optimal state. Don’t let a faulty module keep you off the road.

Frequently Asked Questions

Do I need to program this TCM at a dealership?

No. The main benefit of this part is that we program it for you before shipping. Simply provide your vehicle’s VIN number after purchase, and it will arrive ready to install with the latest GM software updates.

How do I provide my VIN number?

After you complete your purchase, you will need to send us your 17-digit VIN (Vehicle Identification Number). We will then flash the module specifically for your vehicle’s configuration before we ship it out.

Will this fix my transmission problems for good?

This module is a direct replacement for a failed original and is loaded with the newest software from GM, which often corrects the underlying issues that caused the initial failure. It is the correct solution for a confirmed faulty TCM.

Is this part difficult to install myself?

For someone with basic mechanical skills and tools, installation is very straightforward. The module is typically easy to access in the engine bay. Please refer to our installation guide above for the general steps.

What is the difference between this and a used TCM from a junkyard?

A used module from another vehicle will not work, as it’s programmed for that specific vehicle’s VIN and options. Our module is a quality part that is professionally programmed to match your exact vehicle, ensuring seamless communication and performance.

Year
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2019

Make

Model

BRAVADA

Brand

GM

MPN

24289415

Manufacturer Part Number

Hardware Type

Scroll to Top