GM Body Control Module 13578420 Programmed / Cloned To Your Old BCM

End Your Car’s Electrical Gremlins

Tired of flickering lights and random electronic failures in your GM vehicle? This Body Control Module is the solution. It arrives pre-programmed by our experts using data from your original BCM, ensuring a perfect, plug-and-play fit. Skip the expensive dealer programming and get your car back to normal quickly and affordably. Order today for a simple, permanent fix!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

{
“title”: “Programmed 2011 Regal Body Control Module BCM 13577850“,
“long_description”: “

Is Your Vehicle Experiencing Strange Electrical Issues?

n

The Body Control Module, or BCM, is the central command center for your vehicle’s electronic accessories. It controls everything from your power windows and locks to your interior lights, wipers, and security system. When the BCM starts to fail in vehicles like the 2011 Buick Regal, Chevrolet Cruze, or GMC Terrain, it can cause a host of baffling and frustrating problems that seem completely unrelated. If you’re tired of chasing electrical gremlins, you’ve found the definitive solution.

nn

Common Failure Symptoms of a Faulty BCM

n

    n

  • ✔ Power windows, door locks, or mirrors operating erratically or not at all.
  • n

  • ✔ Interior dome lights or exterior lamps staying on or not turning on.
  • n

  • ✔ The horn sounding randomly or the windshield wipers activating on their own.
  • n

  • ✔ Instrument cluster displaying incorrect information or warning lights appearing for no reason.
  • n

  • ✔ Vehicle security system malfunctioning, leading to no-start conditions or false alarms.
  • n

  • ✔ Remote keyless entry (fob) not working consistently.
  • n

  • ✔ Communication error codes (U-codes) when scanned with a diagnostic tool.
  • n

nn

The Simple, Cost-Effective Plug-and-Play Solution

n

Replacing a BCM isn’t as simple as swapping the part. A new or used module from a dealership or salvage yard must be professionally programmed to your vehicle’s specific Vehicle Identification Number (VIN) and options. This process is expensive and requires a trip to the dealer. Our professional cloning service completely eliminates this step. We transfer all the essential data from your original, failing BCM to a replacement unit, creating a true plug-and-play module. This means no additional programming or dealer visits are required.

nn

From the Diagnostic Bay

We recently worked on a 2011 GMC Terrain where the owner was convinced the vehicle was haunted. The radio would change stations on its own, and the rear wiper would activate every time the brake was pressed. The owner had already replaced the radio and the wiper motor to no avail. A quick scan showed multiple communication faults pointing back to the BCM. Instead of a costly new module and programming at the dealer, we performed our cloning service. Once the programmed replacement was installed, all the bizarre electrical issues were gone. It’s a perfect example of how a failing central computer can cause chaos throughout the vehicle’s systems.

nn

How Our BCM Programming Service Works

n

Our process is designed to be as simple and straightforward as possible to get you back on the road quickly.

n

    n

  1. Place Your Order: Purchase this service and ensure your contact information is correct.
  2. n

  3. Receive Instructions: We will contact you with detailed, easy-to-follow instructions on how to remove and ship your original BCM to our facility.
  4. n

  5. We Perform the Service: Once we receive your module, our expert technicians will perform a full data transfer to the replacement unit. This service is typically completed within 1-2 business days.
  6. n

  7. Receive Your Modules: We ship your original module and the ready-to-install replacement back to you. Simply plug it in, and you’re ready to go!
  8. n

nn

Installation and Post-Install Procedures for Your 2011 Regal Body Control Module

n

Installation is as simple as disconnecting the battery, removing the old BCM (typically located under the driver’s side dash), and plugging in the replacement unit. In over 95% of cases, no further action is needed. However, in some vehicles, certain systems may need to be re-synchronized with the new BCM. These are simple procedures that a technician with a capable scan tool can perform.

n

    n

  • Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required. This syncs the airbag system with the BCM and turns off the light. This is only necessary if the light is illuminated.
  • n

  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure proper function of the brake lights and traction control system.
  • n

n

Disclaimer: Specific procedures can vary by exact make and model. Always consult a factory service manual or a qualified technician for guidance if you are unsure.

nn

Guaranteed Compatibility

n

This service is compatible with a wide range of GM vehicles and part numbers. If your original module has one of the following part numbers, this is the correct service for you:

n

Part Numbers: 13577850, 13505326, 13500384, 13574844, 13504004, 13504494, 13578420

n

Fitment:

n

    n

  • 2011 Buick Regal
  • n

  • 2010-2011 GMC Terrain
  • n

  • 2011, 2013 Chevrolet Cruze
  • n

  • 2010 Cadillac SRX
  • n

  • 2010 Chevrolet Equinox
  • n

nn

Frequently Asked Questions

What data is transferred from my original BCM?

We perform a complete data transfer, which includes your vehicle’s VIN, immobilizer (key) data, mileage, and all factory-programmed options (RPO codes). This ensures seamless integration and functionality.

Do I need to have a dealer program this module after I receive it?

Absolutely not. The purpose of our service is to provide you with a module that is 100% plug-and-play. No dealer trips, no extra programming fees.

How long does the cloning service take?

The service itself is typically completed within 24-48 hours of us receiving your original module. Shipping times will vary based on your location.

What if my original BCM is completely dead or water damaged?

Please contact us before ordering. In many cases, even with significant damage, our technicians can still recover the necessary data. However, we need to assess the situation first to ensure a successful transfer.

Will I get my original BCM back?

Yes. We always return your original module along with the programmed replacement unit for your records.

“,
“short_description”: “

Restore Your Vehicle’s Electronics Today!

Get a fully programmed Body Control Module for your 2011 Buick Regal and other GM models. Our simple cloning service makes this a true plug-and-play solution, saving you a costly trip to the dealership. Order now to eliminate frustrating electrical problems for good.

“,
“meta_description”: “Experiencing electrical issues? Get a plug-and-play programmed 2011 Regal Body Control Module. Our cloning service saves you time and money. Order now and fix your vehicle!”,
“focus_keyword”: “2011 Regal Body Control Module”,
“image_meta”: {
“alt_text”: “Programmed 2011 Regal Body Control Module BCM 13577850 with multiple electrical connectors visible.”,
“image_title”: “2011 Buick Regal BCM 13577850 Programming Service”,
“caption”: “This Body Control Module (BCM), part number 13577850, is offered with our expert cloning service for a plug-and-play installation.”,
“description”: “Detailed view of the Body Control Module for a 2011 Buick Regal, Chevrolet Cruze, GMC Terrain, and other compatible GM vehicles. This unit governs the vehicle’s body electronics, including power windows, locks, lights, and security systems.”
}
}

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2010

Make

Model

REGAL

Brand

GM

MPN

13577850

Manufacturer Part Number

, , , , , ,

Manufacturer Warranty

1 Year

Scroll to Top