Restore Full Functionality to Your GM Vehicle
Are you battling bizarre electrical issues in your 2015 GMC Yukon, Chevy Silverado, or other compatible GM vehicle? Symptoms like flickering lights, malfunctioning power windows, a haywire security system, or even a no-start condition often point to a single culprit: a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of frustrating and unpredictable problems. This listing offers a straightforward, plug-and-play solution to get your vehicle back in perfect working order.
The Easiest Way to Replace Your 2015 Yukon BCM
Forget expensive dealership visits and the hassle of finding a shop with the right programming tools. Our professional cloning service makes this repair simple. You send us your original BCM, and we transfer all of its critical data—including VIN, mileage, key information, and specific options—to a replacement unit. The module you receive back will be a direct, plug-and-play match for your vehicle. No additional programming or calibration will be required on your end for the vast majority of functions.
From the Diagnostic Bay
We recently had a 2015 Chevy Tahoe (which shares this BCM) come into the shop with a classic ‘gremlin’. The customer complained of a randomly dying battery and interior lights that would flicker at odd times. After hours of checking wiring and grounds, we traced the issue to a parasitic draw from the BCM. It wasn’t fully shutting down when the vehicle was off, keeping multiple circuits active and draining the battery overnight. A cloned BCM from our stock solved the problem instantly. The customer was thrilled to have a reliable vehicle again without paying for a new module and programming at the dealer.
Is Your BCM Failing? Common Symptoms
- ✔ Erratic interior or exterior lights (flickering, staying on, or not working at all).
- ✔ Power windows, locks, or mirrors behaving unpredictably or failing to respond.
- ✔ The horn honking randomly or not working when pressed.
- ✔ Security system faults, false alarms, or a “Service Theft Deterrent System” message.
- ✔ Windshield wipers activating on their own or not turning on/off correctly.
- ✔ Communication error codes (U-codes) stored when scanned with a diagnostic tool.
- ✔ In severe cases, a complete no-start condition where the vehicle does not recognize the key.
How Our Cloning Service Works
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We’ll Contact You: We will reach out with clear, simple instructions on how to remove and ship your original BCM to our facility. Please ensure your contact information is up to date.
- ✔ Data Transfer: Once we receive your module, our technicians will perform a full data transfer to the replacement BCM, making it an exact electronic copy.
- ✔ Return Shipping: We ship your newly programmed, ready-to-install BCM back to you, typically within 1-2 business days. You’ll receive tracking information as soon as it’s on its way.
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some vehicle systems may require a simple sync procedure after the new module is connected. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is on after installation, a “Setup SDM Primary Key in BCM” procedure is needed. This syncs the new BCM with the airbag module and requires a professional-grade scan tool. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper brake light operation and traction control system function.
Always consult a factory service manual or a qualified technician for guidance specific to your vehicle.
Fitment and Part Number Compatibility
This Body Control Module is a direct fit for a wide range of 2015 and newer General Motors vehicles. Please verify that your original module has one of the following part numbers printed on its label:
Compatible Part Numbers: 13592137, 13506935, 13506936, 13587704, 13594764
Known Compatible Models Include:
- 2015 Corvette
- 2015-2016 Impala (New Style)
- 2015 Sierra 1500/2500/3500 & Denali Models
- 2015 Silverado 1500/2500/3500
- 2015 Suburban 1500
- 2015 Tahoe
- 2015 Yukon & Yukon XL 1500
- 2015 Escalade & Escalade ESV
- 2015-2016 Cadillac ATS
- 2015-2016 Cadillac CTS
- 2015 Cadillac XTS
- 2015-2018 Chevrolet Sonic
Note: Location of the BCM varies by model (e.g., under steering column, LH dash, on firewall). Please confirm the location on your specific vehicle before ordering.
Frequently Asked Questions
How does the cloning process work?
You purchase this service and mail your original BCM to us. We use specialized equipment to read the data from your module and write it onto the replacement unit. This makes the replacement an exact electronic match to your original, ensuring it works seamlessly with your vehicle.
Will I need to have my keys reprogrammed?
No. Because we clone all the data, including the security information related to your keys, the replacement BCM will recognize your existing keys. This is a major benefit that saves you time and money.
What if my original BCM is water damaged or won’t communicate?
This cloning service requires that we can successfully read the data from your original module. If your BCM is severely damaged (e.g., from fire or extensive water corrosion), data recovery may not be possible. Please contact us before ordering if you suspect your module is unreadable.
How long does this entire process take?
The service itself is fast. We typically program and ship the replacement module within 1-2 business days of receiving your original. The total turnaround time will depend on the shipping speeds you choose.
Is this a guaranteed fix for my vehicle’s problems?
This service guarantees you will receive a functional, correctly programmed BCM. While a faulty BCM is the cause of the symptoms listed above in most cases, you should always perform proper vehicle diagnostics to confirm the BCM is the root cause of your issue before ordering.
Do I need to return my old part after I receive the new one?
No, there is no core charge for this service. You can keep your original module.