Restore Your Vehicle’s Brain, Not Just a Part
If your 2015 Corvette or other compatible GM vehicle is acting possessed with bizarre electrical issues, you’re in the right place. As a technician with over two decades of experience, I’ve seen it all: dashboards lighting up like a Christmas tree, windows that won’t roll down, or a security system that randomly prevents the car from starting. These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, chaos ensues. A replacement from the dealership means expensive hardware followed by mandatory, high-cost programming. Our solution bypasses that completely.
We offer a straightforward and reliable BCM programming service. You simply purchase this service, send us your original BCM, and we handle the rest. We will meticulously transfer all the critical vehicle-specific data—including VIN, mileage, and security information—from your original module to a fully tested replacement unit. This cloning process ensures that when you receive the BCM back, it’s a direct-fit, data-matched component for your car. This is the most efficient way to get a reliable fix without the dealership headache.
A Technician’s Notebook: The Intermittent No-Start Nightmare
I remember a 2015 Silverado that came into the shop with a frustrating intermittent no-start condition. The owner had already replaced the battery and starter. All diagnostic codes pointed to a communication loss with the BCM (U0140). The problem was, it would only happen when the cabin was hot. After hours of diagnostics, we confirmed the BCM’s internal processor was failing under thermal stress. Instead of a costly new module and a full vehicle reprogram, we used this exact cloning service. The customer sent us their module, we cloned it, and sent the replacement back. The truck fired up perfectly every time after that, saving the owner nearly $700 compared to the dealer quote.
Is Your Vehicle Showing These Symptoms?
- ✔ Power windows, door locks, or interior lights operating erratically or not at all.
- ✔ The security system light is flashing, and the engine will not crank.
- ✔ Dashboard warning lights (like Airbag, ABS, or Traction Control) are on for no reason.
- ✔ The radio or infotainment system randomly shuts off or freezes.
- ✔ Diagnostic trouble codes (DTCs) related to communication loss, such as U0140, U0100, or internal module failure codes like B1001.
- ✔ Horn, wipers, or other accessories activating on their own.
A Straightforward Guide to Our Service & Installation
Our process is designed to be as simple as possible. After you place your order, we will contact you with detailed instructions for shipping your original BCM to our facility.
- Step 1: After purchase, wait for our email with shipping instructions. Please ensure your contact information is correct at checkout.
- Step 2: Safely remove your original BCM. For most vehicles, this involves disconnecting the negative battery terminal first. The BCM is typically located under the driver’s side dash or behind a kick panel.
- Step 3: Securely package and ship your original BCM to the address we provide.
- Step 4: Once we receive your module, we will perform the data cloning service onto the replacement BCM within 1-2 business days.
- Step 5: We ship the programmed replacement BCM back to you with tracking information. Simply install it, reconnect your battery, and you’re ready to go.
Important Post-Installation Note: In some cases, additional relearn procedures may be needed. If your airbag light is on, a professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure. A ‘Brake Pedal Position Relearn’ might also be necessary on certain models. Always consult a factory service manual for vehicle-specific details.
Verified Vehicle Compatibility
This BCM programming service is guaranteed to work for modules with part numbers 13592137, 13506935, 13506936, 13587704, or 13594764. It fits a wide range of GM cars, trucks, and SUVs. Please verify the location and part number on your original module before ordering.
- Cadillac: 2015 ATS, 2016 ATS (ID 13587704), 2015-2016 CTS (Sdn), 2015 Escalade / ESV, 2015 XTS
- Chevrolet: 2015 Corvette, 2015-2016 Impala (New Style), 2015 Silverado 1500/2500/3500, 2015-2018 Sonic, 2015 Suburban 1500, 2015 Tahoe
- GMC: 2015 Sierra 1500/2500/3500, 2015 Sierra Denali 1500/2500/3500, 2015 Yukon / Yukon XL 1500
Frequently Asked Questions
How does this cloning service work?
You send us your vehicle’s original Body Control Module. We use specialized equipment to read all the essential data (VIN, security keys, mileage, options) and write it onto a fully functional replacement module. This makes the new module a perfect electronic match for your vehicle.
Why is this better than buying a new BCM from a dealer?
Our service saves you significant money and time. You avoid the high cost of a new module and the separate, expensive programming fees charged by dealerships. Plus, since the module arrives pre-programmed, it eliminates the need for a trip to the dealer for installation.
What is the turnaround time?
We typically complete the programming service and ship your replacement BCM back out within 1-2 business days of receiving your original module.
Do I need to do any programming myself after I install it?
No, the core programming is done. However, on some vehicles, a simple ‘relearn’ procedure for the Brake Pedal Position sensor or Airbag System may be needed if a warning light appears. This requires a professional scan tool but is a quick procedure for any competent mechanic.
Is there a core charge?
No, there is no core charge. We need your original module to perform the data transfer, but you are not required to return it for a refund.