2017 Suburban 1500 ECM 12678815 Programmed to Your VIN

Restore Your Suburban’s Performance

Fix check engine lights, stalling, and no-start issues with this direct-fit Engine Control Module. It arrives pre-programmed to your VIN with the latest GM software, eliminating the need for expensive dealer flashing. Get back on the road fast – order today!

$279.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08558-93 Categories: ,
Guaranteed Safe Checkout

Is Your Suburban Running Rough, Stalling, or Showing a Check Engine Light?

As a technician with over two decades of experience, I’ve seen firsthand how a failing Engine Control Module (ECM) can bring a perfectly good truck to a standstill. If your 2017 Suburban 1500 is experiencing baffling issues like poor fuel economy, erratic shifting, a persistent check engine light, or even a no-start condition, the ECM is a primary suspect. This isn’t just a part; it’s the central computer for your engine, and when it fails, it creates chaos.

The Dealership-Free Solution: Programmed & Ready for Installation

Forget the hassle and high cost of a dealership visit. We take the complexity out of the repair by programming this ECM specifically for your vehicle before it even leaves our facility. Simply provide us with your vehicle’s VIN (Vehicle Identification Number) during checkout, and our experts will flash the module with the latest, most stable software updates directly from GM. This ensures perfect compatibility and optimal performance right out of the box.

Expert Pro Tip: Check Your Connections First

Before condemning your old ECM, take a moment to inspect the module’s electrical connectors. I’ve seen cases where corrosion or a loose pin on the harness mimics complete ECM failure. Disconnect the battery, unplug the ECM connectors, and look for any green or white powder (corrosion) or bent pins. Cleaning them with a dedicated contact cleaner can sometimes solve the problem. If the connections are clean and tight, and the issues persist, you can be confident the module itself is the culprit.

Why Choose This 2017 Suburban 1500 ECM?

When you’re dealing with the brain of your engine, you need a reliable part that integrates seamlessly. This module is the definitive solution for restoring your vehicle’s factory performance and reliability.

  • โœ” VIN-Specific Programming: Arrives flashed with the correct GM calibration for your exact vehicle.
  • โœ” Solves Common Failures: Corrects issues like false sensor codes, communication errors (U-codes), and poor engine performance.
  • โœ” Direct-Fit Replacement: Engineered to replace a range of original part numbers for a perfect match.
  • โœ” Latest Software: Benefit from the most recent GM updates for improved efficiency and drivability.

Simple Installation & Required Relearn Procedures

Replacing the ECM is straightforward, but completing the job correctly requires a few final steps. Please be aware that while we handle the initial programming, certain security and operational procedures must be performed after the part is installed on the vehicle.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery.
  2. Locate the ECM: On most Suburbans, Tahoes, and Sierra/Silverado trucks, the ECM is located in the engine compartment on the driver’s side, near the firewall or inner fender.
  3. Swap the Module: Carefully unplug the electrical connectors and unbolt the old ECM. Mount the new module in its place and securely reconnect the harnesses.
  4. Reconnect Battery: Re-attach the negative battery terminal.
  5. Perform Relearns (CRITICAL STEP): This is the buyer’s responsibility. If the vehicle does not start, a Vehicle Theft Deterrent System (VTDS) relearn is mandatory. This procedure requires a professional scan tool with access to GM’s Tis2web or Techline Connect service. Additional procedures like a Crankshaft Position Variation Relearn or injector flow rate programming may also be necessary depending on your specific vehicle and the codes present.

Guaranteed Compatibility

This module is a direct replacement for several GM part numbers and fits a wide variety of trucks and SUVs. Please verify your original part number is on this list or that your vehicle is listed below.

Replaces Part Numbers: 12692068, 12704476, 12686382, 12674052, 12674472, 12678815

Fits a wide range of GM models including:

  • 2017 Cadillac Escalade / ESV
  • 2017 Chevrolet Tahoe / Suburban 1500
  • 2017 GMC Yukon / Yukon XL 1500
  • 2016-2018 Chevrolet Silverado 1500 & GMC Sierra 1500 (verify ID)
  • 2017 Cadillac ATS, CTS, XTS (verify engine options)
  • 2017 Chevrolet Corvette
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2017

Model

SUBURBAN 1500

Brand

GM

MPN

12678815

Manufacturer Part Number

, , , , ,

Manufacturer Warranty

1 Year

Hardware Type

Scroll to Top