2016 Express 2500 ECM 22819494 VIN Programmed Engine Control Module

Restore Your Express 2500’s Performance!

Get your van back on the road with this fully programmed Engine Control Module. It arrives flashed to your VIN with the latest GM software, eliminating the need for a dealer visit. Solves common issues like stalling, no-start, and check engine lights. Fix your issue today!

$225.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-02768-114 Categories: ,
Guaranteed Safe Checkout

Is Your 2016 Express Van Sidelined with Engine Problems?

As a mechanic with over two decades of experience, I know that for a business owner, a work van like the 2016 Express 2500 isn’t just a vehicleโ€”it’s a tool. When it’s down, you’re losing money. If you’re dealing with a persistent Check Engine Light, erratic engine behavior, stalling, or a complete no-start condition that diagnostics point towards the engine computer, you’ve found the right solution. A faulty Engine Control Module (ECM) can cause a host of frustrating issues that can be difficult to trace, often leading to wasted time and money on incorrect repairs.

A Real-World Scenario from My Shop

Just last month, a contractor’s 2016 Express 2500 was brought in. It had intermittent stalling and a stubborn P0606 code (ECM Processor Fault). After confirming all power and ground circuits to the module were solid, we knew the internal processor of the ECM was failing. Instead of a costly tow to the dealership and days of downtime, we used this exact pre-programmed module. His van was back on the road making him money the very same day. That’s the difference a reliable, ready-to-install part makes.

The Direct-Fit Solution: A Pre-Programmed 2016 Express 2500 ECM

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and dealership hassle out of the equation. When you purchase this ECM, we will flash it with the latest official GM software updates, specifically calibrated to your vehicle’s unique Vehicle Identification Number (VIN). This ensures that all factory parameters for your engine, transmission, and emissions systems are perfectly matched.

  • โœ” VIN-Programmed for Your Van: We handle all the programming before we ship. It arrives ready for installation.
  • โœ” No Dealer Visit Required: Save hundreds of dollars and days of downtime by avoiding dealership programming fees and wait times.
  • โœ” Resolves Common ECM Failure Symptoms: Effectively corrects issues like false sensor codes, harsh shifting, poor fuel economy, and no-start conditions.
  • โœ” Loaded with GM Updates: Your module comes with the newest software, which often corrects drivability issues present in the original programming.

Simple, Plug-and-Play Installation

You don’t need to be a master technician to install this module. With basic hand tools, you can have your Express van running properly in under an hour. A security relearn procedure may be required after installation, which is a simple process that can be done without any special tools.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery.
  2. Locate the ECM: On the 2016 Express 2500, the ECM is typically found in the engine compartment on the driver’s side, near the fender or firewall.
  3. Disconnect Connectors: Carefully release the locking tabs and unplug the wiring harnesses from the old module.
  4. Remove Old Module: Unbolt the original ECM from its mounting bracket.
  5. Install New Module: Bolt the new, pre-programmed ECM into place and securely reconnect the wiring harnesses.
  6. Reconnect Battery: Re-attach the negative battery terminal.
  7. Perform Security Relearn: Turn the key to the ‘ON’ position for 10-15 minutes, then turn it off for 10 seconds. Repeat this cycle three times. On the fourth try, the vehicle should start.

Expert Pro Tip: Check Your Grounds Before Replacement

Before you swap the module, take 5 minutes to locate the main engine-to-frame ground strap. On these vans, it’s often a braided cable near the passenger side motor mount. Corrosion at this connection point is a notorious cause of ECM failure and electrical gremlins. Unbolt it, clean the contact points on the frame and the terminal with a wire brush until they’re shiny, and re-secure it tightly. I’ve seen this simple step prevent a costly misdiagnosis more times than I can count.

Guaranteed Compatibility & Cross-Reference

This ECM is a direct replacement for a wide range of GM vehicles and is guaranteed to function correctly if your original module carries any of the following part numbers:

Interchangeable Part Numbers: 12668866, 12668994, 12643636, 12663405, 12670335, 22819494, 12692200

While this listing is focused on the 2016 Express 2500, this versatile module also fits an array of other GM models, including the Silverado 2500/3500, Sierra 2500/3500, Savana vans, Cruze, Sonic, Trax, and more. By providing your VIN, you ensure we send a module that is 100% correct for your specific application.

Condition

Refurbished

Genuine OEM

Yes

MPN

22819494

Interchange part number

PartNumber

590

Model

EXPRESS 2500 VAN

Year

2012

Brand

GM

Manufacturer Part Number

, , , , , ,

Scroll to Top