Restore Full Functionality to Your GM Vehicle with Our Expert BCM Programming Service
Are you experiencing a cascade of bizarre electrical problems in your 2015 GMC Yukon, Sierra, Tahoe, or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows, erratic dashboard warnings, or a no-start condition often point to a single culprit: a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it fails, it can make your truck or SUV feel haunted. Dealerships will quote you a fortune for a new module and the required programming. We offer a smarter, more affordable, and simpler solution.
This listing is for our professional mail-in programming service for GM Body Control Module part number 13594692 and its interchanges. You send us your original, faulty BCM, and we transfer all the critical data—including VIN, mileage, key information, and vehicle-specific options—to a fully tested, replacement unit. We then ship the newly programmed module back to you, ready for a plug-and-play installation. This process completely bypasses the need for expensive dealership tools or additional programming fees.
We had a 2015 Sierra 1500 come into the shop with the owner at his wit’s end. The turn signals worked intermittently, the radio would shut off randomly, and the power locks had a mind of their own. He had already replaced the battery and checked all the fuses. Another shop told him he needed a new BCM, but they couldn’t program it. After he sent us his original module, we performed our cloning service. Upon installation, every single one of his electrical gremlins vanished. It wasn’t a dozen separate issues; it was one central failure. Our service saved him hundreds of dollars and the headache of a dealership visit, getting his truck back to perfect working order.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Erratic interior or exterior lighting (headlights, dome lights, etc.).
- ✔ Dashboard warning lights illuminating for no reason (e.g., security light, service messages).
- ✔ The vehicle’s security system preventing it from starting.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Radio or infotainment system malfunctions.
- ✔ Wipers activating on their own or not responding to the switch.
Why Our 2015 Yukon Body Control Module Service is the Best Solution
When you purchase a new or used BCM from a dealer or salvage yard, it will not work correctly until it is programmed to your vehicle’s specific VIN and option content. This requires specialized, expensive scan tools and software subscriptions. Our cloning service makes this entire process obsolete. By transferring the data from your original module, the replacement BCM becomes an exact digital twin of the one your vehicle came with from the factory. This means the car won’t know the difference, ensuring a seamless and error-free installation.
How The Mail-In Service Works:
- ✔ Purchase: Complete your purchase through our website.
- ✔ We Contact You: We will reach out to you with detailed instructions and the shipping address to send your original BCM. Please ensure your contact information is up to date.
- ✔ Ship Your Module: Carefully package and ship your original BCM to our facility.
- ✔ We Program: Upon receipt, our technicians will professionally clone all data to the replacement module within 1-2 business days.
- ✔ We Ship Back: We ship your newly programmed, plug-and-play BCM back to you and provide you with tracking information.
Post-Installation Requirements
While our service makes this a nearly plug-and-play process, some GM vehicles may require a simple relearn procedure after installation. These are standard procedures and can often be performed with a high-level diagnostic tool.
- Airbag System Sync: If the airbag warning light is on after installation, a “Setup SDM Primary Key in BCM” procedure is necessary to sync the new BCM with the airbag system. This is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure correct brake light operation and to satisfy the traction control system.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Fitment and Part Numbers
This service is for BCM part number 13594692 and is a direct replacement for the following part numbers:
13594768, 13593214, 13580690, 13591519, 13594769
This module is found in a wide range of GM vehicles, including but not limited to:
- 2014-2017 Chevrolet SS & Caprice
- 2014-2015 Cadillac ATS, CTS, XTS
- 2014-2015 Chevrolet Corvette, Silverado 1500
- 2015 Chevrolet Silverado 2500/3500
- 2015 Chevrolet Suburban & Tahoe
- 2015-2019 Chevrolet Impala
- 2014-2015 GMC Sierra 1500
- 2015 GMC Sierra 2500/3500
- 2015 GMC Yukon & Yukon XL
- 2015 Cadillac Escalade & Escalade ESV
Please verify your part number and check the fitment list carefully before ordering. The BCM is typically located under the steering column on the driver’s side.
Frequently Asked Questions
Is this a plug-and-play BCM?
Yes! Because we clone the data from your original module, the replacement BCM we send you is ready to install with no additional programming required. In some rare cases, a minor relearn procedure like for the brake pedal position sensor may be needed.
How long does the programming service take?
Once we receive your original BCM, our technicians typically complete the cloning process within 1-2 business days before shipping the programmed replacement back to you.
Do I need to send my keys with the module?
No, you do not need to send your keys. Our data cloning process transfers all the necessary security and key information directly from your old module to the new one.
What if my original BCM is completely dead or water damaged?
In many cases, even with significant damage, we can still extract the necessary data. Please contact us before ordering if your module is severely damaged (e.g., fire, flood, broken connectors) to discuss the possibility of data recovery.
Where is the BCM located on my 2015 GMC Yukon?
On the 2015 GMC Yukon and similar GM trucks/SUVs, the Body Control Module is typically located under the driver’s side of the dashboard, near the steering column.