Is Your 2015 Chrysler, Dodge, or Charger Running Rough?
A faulty Engine Control Module (ECM) can be the source of countless frustrating and difficult-to-diagnose issues. If your 2015 Chrysler 300, Dodge Challenger, or Dodge Charger with the 3.6L engine is experiencing erratic behavior, poor fuel economy, a persistent check engine light, or even a no-start condition, the very brain of your vehicle’s engine might be the culprit. Don’t let a failing computer keep you off the road. This pre-programmed ECM is the definitive solution, designed to restore your vehicle’s performance and reliability without a costly trip to the dealership.
From the Diagnostic Bay
We had a 2015 Dodge Charger 3.6L come into the shop that was giving the owner fits. The car would randomly stall at red lights and had a check engine light for an intermittent camshaft position sensor. The owner had already replaced both cam sensors twice with different brands, but the problem persisted. After hours of chasing wires and checking voltages, we finally hooked up a scope to the sensor signal wires directly at the ECM connector. We found the signal was dropping out, but not at the sensor. The issue was internal to the original engine computer; the processor was failing under load. We installed one of our pre-programmed modules, and the car ran perfectly. It’s a classic case where throwing parts at a problem doesn’t work; you have to address the root cause, which is often the ECM itself.
Symptoms of a Failing 3.6L Engine Computer
- âś” Unexplained Check Engine Light (CEL) with various or no specific codes.
- âś” Engine stalling, stuttering, or misfiring, especially when warm.
- âś” Drastic decrease in fuel efficiency.
- âś” The vehicle cranks but refuses to start.
- âś” Automatic transmission shifting erratically or harshly.
- âś” Communication errors with diagnostic scan tools.
- âś” Apparent failure of multiple sensors at once.
The Plug & Play Solution for Your Vehicle
The biggest hurdle in replacing a modern vehicle’s computer is the complex programming required. The ECM needs to know your vehicle’s specific Vehicle Identification Number (VIN), mileage, and other unique configurations to function. Our service eliminates this obstacle completely. When you order from us, we flash the module with your exact VIN and mileage. This means the part you receive is a true Plug & Play solution. There is no need for additional programming, key relearning, or expensive dealer intervention. Simply disconnect the battery, swap the old module with this one, reconnect the battery, and start your engine. It’s the most straightforward and cost-effective way to get your car back to factory-spec operation.
Why a Programmed 2015 Chrysler 300 ECM is the Smart Choice
This module is the central command for your 3.6L Pentastar engine. It precisely controls the fuel injectors, ignition coils, variable valve timing, and dozens of other parameters to ensure optimal power, efficiency, and emissions. When it fails, the entire system is compromised. By choosing our professionally programmed 2015 Chrysler 300 ECM, you are not just buying a part; you are getting a fully integrated component that is ready to take command of your engine the moment it’s installed. We ensure it has the latest manufacturer-approved software and is cleared of all previous vehicle data, providing a clean slate for your car’s systems.
Guaranteed Compatibility
This ECM is a direct replacement for a wide range of part numbers, making it a versatile solution for your 2015 Chrysler 300, Dodge Challenger, or Dodge Charger. It is compatible with the following part numbers: 05150883AC, 05150883AD, 68280995AA, 68280995AB, 68280995AC, 68280995AD, 68230335, 68230334, 68230333, 68230332, 68230331, 68230330, 68230329, 68230328, 68230327, 68230326, 68230325, 68230324, 68230323, 68230322, 68230321, 68230320, 68230316AE, and 68230307AE.
Frequently Asked Questions
Is this ECM really “Plug & Play”?
Yes, absolutely. We program the module with the VIN and mileage you provide during checkout. This ensures it integrates seamlessly with your vehicle’s existing systems, like the ignition and anti-theft, without any need for a trip to the dealer for further programming.
Where is the ECM located on a 2015 Chrysler 300?
On the 2015 Chrysler 300 and its platform mates (Charger/Challenger), the ECM is typically located in the engine bay, on the passenger side, near the strut tower or firewall. It will have several large electrical connectors attached to it.
What information do you need to program my ECM?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This information is crucial for a successful programming process. You can typically find the VIN on your dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Will this fix my check engine light?
If the check engine light is on due to an internal fault within your original ECM, then this replacement part will solve the problem. However, if the light is on because of a separate faulty sensor, wiring issue, or mechanical problem, you will still need to address that root cause. This module will fix any issues directly caused by the computer itself.
Does this part also fit a 2015 Dodge Charger with the 3.6L engine?
Yes, this Engine Control Module is compatible with the 2015 Dodge Charger, 2015 Dodge Challenger, and 2015 Chrysler 300, as long as the vehicle is equipped with the 3.6L V6 engine.