Is Your 2015 Dodge Charger, Challenger, or 300 Running Rough?
If you’re dealing with frustrating engine problems in your 3.6L Pentastar-equipped vehicle, a faulty Engine Control Module (ECM) is often the culprit. Symptoms can range from a simple check engine light to severe drivability issues that leave you stranded. This direct-fit replacement engine computer, part number 68230331, is the definitive solution to restore your vehicle’s performance, reliability, and efficiency. It arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and mileage, making installation a true Plug & Play experience.
From the Diagnostic Bay
We had a 2015 Chrysler 300 come in that was a real head-scratcher. The owner had already replaced the throttle body and multiple sensors chasing an intermittent stalling issue and erratic idle. The codes were all over the place—U-series communication codes, P-series throttle codes—but nothing was consistent. After hours of checking wiring harnesses and grounds, we hooked up our diagnostic scope to the ECM’s 5-volt reference circuit. We found the voltage was dropping out intermittently, which was causing all the connected sensors to report false data. A new, correctly programmed ECM like this one solved every single issue in one go. The customer was thrilled to finally have a reliable car again after months of chasing ghosts.
Common Symptoms of a Failing ECM
- ✔ Persistent Check Engine Light (CEL) with various fault codes.
- ✔ Engine stalling, stumbling, or hesitating, especially under load.
- ✔ Rough or erratic idling.
- ✔ Noticeable decrease in fuel economy.
- ✔ No-start or hard-starting conditions where the engine cranks but won’t fire.
- ✔ Transmission shifting problems or getting stuck in ‘limp mode’.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Misfire codes even after replacing spark plugs and coils.
Why Choose Our Programmed 2015 Charger Engine Computer?
Getting back on the road shouldn’t be complicated. Unlike sourcing a module from a junkyard or a dealership, our process is designed for simplicity and success. We eliminate the most significant hurdle: programming. A dealership will charge hundreds for programming services, and a used module won’t work at all without it. This 2015 Charger Engine Computer is professionally prepared for your exact vehicle. We flash the latest Mopar software and calibrate it using your VIN, ensuring all immobilizer and security information matches perfectly. When it arrives, you simply disconnect the battery, swap the old module for the new one, reconnect the battery, and start your engine. It’s that easy.
Guaranteed Fitment and Compatibility
This module is a direct replacement for a wide range of part numbers, ensuring broad compatibility. Please verify that your vehicle is on the list below and that your original part number is listed.
Fits The Following Vehicles:
- 2015 Dodge Challenger (with 3.6L engine)
- 2015 Dodge Charger (with 3.6L engine)
- 2015 Chrysler 300 (with 3.6L engine)
Replaces The Following Part Numbers:
05150883AC, 05150883AD, 68280995AA, 68280995AB, 68280995AC, 68280995AD, 68230335, 68230334, 68230333, 68230332, 68230331, 68230330, 68230329, 68230328, 68230327, 68230326, 68230325, 68230324, 68230323, 68230322, 68230321, 68230320, 68230316AE, 68230307AE
By purchasing this pre-programmed 2015 Charger Engine Computer, you are choosing a hassle-free, cost-effective solution to get your vehicle running properly again. Don’t let a faulty ECM dictate your driving experience. Take control and restore your car’s factory performance today.
Frequently Asked Questions
Do I need to take this computer to the dealer for programming?
Absolutely not. This engine computer comes fully programmed to your vehicle’s specific VIN and mileage. It is a true Plug & Play solution. Simply install it, and you’re ready to drive.
What information do you need from me to program it?
During the checkout process, we will require your vehicle’s 17-digit VIN (Vehicle Identification Number) and its current mileage. This ensures a perfect software match for your car’s features and security system.
Is this a guaranteed fix for my check engine light?
This module will resolve any issues and check engine light codes directly caused by a faulty ECM. However, if your vehicle has other mechanical or electrical problems (e.g., a bad sensor or wiring issue), those will need to be addressed separately.
Where is the ECM located on my 2015 Charger/Challenger/300?
On these 3.6L models, the ECM is typically located in the engine bay, on the passenger side, near the firewall or shock tower. It will have several large electrical connectors attached to it. Always disconnect the vehicle’s battery before attempting to remove or install the module.
Does this part come with a warranty?
Yes, all of our engine control modules come with a comprehensive warranty. Please see the warranty tab on this product page for specific details and duration.