Restore Peak Performance to Your 3.6L V6
Is your 2015 Dodge Challenger, Charger, or Chrysler 300 suffering from erratic behavior, a persistent check engine light, or a no-start condition? The Engine Control Module (ECM), often called the vehicle’s brain, is responsible for managing everything from fuel injection and spark timing to transmission shifts and emissions control. When it begins to fail, it can cause a cascade of frustrating and difficult-to-diagnose problems. This direct-replacement Engine Control Module, part number 68230334, is the definitive solution to get your Mopar running smoothly and reliably again.
Is Your Vehicle Exhibiting These Symptoms?
A failing ECM can manifest in various ways, often mimicking other component failures. If you’re experiencing any of the following, your engine computer could be the culprit:
- ✔ Persistent Check Engine Light (CEL) with communication-related trouble codes (U-codes).
- ✔ Engine stalling, stumbling, or misfiring for no apparent reason.
- ✔ Drastic decrease in fuel economy.
- ✔ Harsh or erratic automatic transmission shifting.
- ✔ Intermittent no-start or hard-starting conditions.
- ✔ Loss of power and poor acceleration.
- ✔ Inconsistent performance that gets worse as the engine warms up.
From the Diagnostic Bay
We had a 2015 Charger 3.6L come into the shop that was a real head-scratcher. The owner complained of random stalling at traffic lights and occasional rough idling. Two other shops had already replaced the spark plugs, coils, and even a fuel pump, but the problem persisted. No consistent codes were being stored, just a few intermittent communication faults. After verifying the wiring harness and power/ground connections to the ECM, we connected a scope. We noticed the injector pulse width signals were becoming erratic as the module heated up. We swapped in a pre-programmed 2015 Challenger Engine Computer, and the car ran perfectly. The original ECM had an internal fault that only appeared under specific thermal conditions—a classic sign of module failure that parts-swapping often misses.
The Plug-and-Play Solution for Your 2015 Challenger Engine Computer
Forget expensive dealership visits and the complexities of programming a new module. We handle the hard part for you. This ECM arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This critical step ensures that the module communicates flawlessly with your car’s other systems, including the ignition, anti-theft (SKIM), and transmission controller. The result is a true plug-and-play installation. Simply disconnect the battery, swap the modules, reconnect the battery, and you’re ready to drive.
Guaranteed Compatibility
This module is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle. It is engineered to meet or exceed original equipment specifications for the following vehicles equipped with the 3.6L V6 engine:
- 2015 Dodge Challenger
- 2015 Dodge Charger
- 2015 Chrysler 300
This unit is compatible with the following OEM part numbers: 05150883AC, 05150883AD, 68280995AA, 68280995AB, 68280995AC, 68280995AD, 68230335, 68230334, 68230333, 68230332, 68230331, 68230330, 68230329, 68230328, 68230327, 68230326, 68230325, 68230324, 68230323, 68230322, 68230321, 68230320, 68230316AE, 68230307AE.
Frequently Asked Questions
What does ‘Plug and Play’ really mean?
It means the module comes pre-programmed with your vehicle’s specific VIN and security information. You do not need a scan tool, a trip to the dealership, or any special software to install it. Once you install the part, the car will start and run correctly, as all the necessary vehicle-specific data is already loaded.
How do I provide my VIN and mileage?
After you place your order, you will be prompted to provide your vehicle’s information. We cannot process the order without the correct VIN, as it is essential for the programming service.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue. However, it’s crucial to ensure the root cause of the problem has been properly diagnosed. This module will not fix issues caused by other faulty sensors or mechanical problems.
Is any other programming required after installation?
No. Our programming service covers all aspects needed for the module to function in your vehicle. There is no need for a ‘proxy alignment’ or any other dealer-level procedures.
Do I need to send my old computer (core) back?
This listing does not require a core return. You can keep or dispose of your old module as you see fit.
What if my original part number is slightly different but my vehicle is listed?
The part numbers listed represent a large family of interchangeable modules. As long as your vehicle is a 2015 Challenger, Charger, or 300 with the 3.6L engine, this module will be the correct replacement, even if your original part number is not on the list.