2015-2016 Yukon XL 1500 ECM 12672963 Programmed to Your VIN

Restore Your Yukon XL 1500’s Performance

Experiencing stalling, no-start conditions, or random check engine lights? This genuine Engine Control Module (ECM) comes fully programmed to your vehicle’s VIN, ensuring a straightforward installation and resolving complex electronic issues. Fix your Yukon XL right the first time. Get back on the road fastโ€”order yours today!

$174.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08396-106 Categories: ,
Guaranteed Safe Checkout

Is Your 2015-2016 Yukon XL 1500 Acting Up?

If you’re dealing with frustrating and unpredictable engine problems, you’re not alone. As a technician with over two decades of experience, I’ve seen countless GM trucks and SUVs roll into my bay with symptoms that leave owners scratching their heads. A faulty Engine Control Module (ECM), the brain of your vehicle, is often the hidden culprit behind these complex issues.

Your Yukon XL might be experiencing:

  • โœ” Intermittent or complete no-start conditions, where the engine just cranks.
  • โœ” Sudden stalling while driving or when coming to a stop.
  • โœ” A persistent Check Engine Light with a confusing array of trouble codes.
  • โœ” Poor fuel economy and a noticeable loss of power.
  • โœ” Erratic automatic transmission shifting or a feeling of being stuck in one gear.
  • โœ” Communication errors with other modules, leading to warning lights like “Service StabiliTrak.”

Ignoring these signs can lead to more significant problems, potential damage to other components, and a vehicle that’s simply unreliable. The issue isn’t a simple sensor; it’s the central command unit failing to do its job.

From the Shop Floor: A Real-World Diagnostic

“A customer’s 2015 YUKON XL 1500 came in last week with these exact symptoms. It would crank but not start, and when it did run, it shifted erratically and threw a half-dozen communication codes. The local shop had replaced the throttle body and a few sensors, but the problem persisted. After 15 minutes with my scan tool, I saw the classic signs of internal ECM failure โ€“ specifically, a processor performance code (P0606) that wouldn’t clear. We installed one of our pre-programmed modules, performed the security relearn, and the truck fired right up and ran perfectly. This isn’t just a part; it’s the definitive fix for a complex problem.”

The Direct-Fit, Programmed Solution: ECM Part #12672963

This isn’t just a replacement part; it’s a complete solution designed to restore your vehicle’s factory performance and reliability. This Engine Control Module is the correct, genuine component for your Yukon XL 1500 and a wide range of other GM vehicles. The most critical service we provide is programming the module specifically to YOUR vehicle before it ever leaves our facility.

Why VIN Programming is a Game-Changer

In the past, replacing an ECM was a multi-step nightmare. You’d buy the part, install it, and then have to get your vehicleโ€”often on a tow truckโ€”to a dealership. There, you’d pay hundreds of dollars for them to program the new module to your vehicle’s Vehicle Identification Number (VIN). Without this programming, the vehicle won’t start or run correctly due to anti-theft systems and specific vehicle calibrations.

We eliminate that entire ordeal. Hereโ€™s how our process provides immense value:

  • โœ” Provide Your VIN: After you purchase, simply send us your 17-digit VIN.
  • โœ” We Handle the Programming: Our technicians use certified equipment to flash the ECM with the latest, most stable GM-approved software for your exact vehicle configuration.
  • โœ” Install and Go: The module arrives at your door ready for installation. Once installed, you will only need to perform a simple security relearn procedure (often just a key cycle sequence), which we can provide instructions for. No tow trucks, no dealer appointments, no extra fees.

Guaranteed Compatibility and Reliability

This ECM is a direct replacement for a number of GM part numbers. The manufacturer often consolidates part numbers as they release updated hardware. This module is a verified replacement for the following part numbers:

12692067, 12676230, 12656993, 12662034, 12672537, 12673195, 12663391, 12672963, 12669318

It is designed to fit a broad range of GM cars, trucks, and SUVs. Please verify your vehicle is on the list below to ensure proper fitment. Don’t guess with your vehicle’s most important computer. Get the right part, programmed correctly, the first time.

Comprehensive Vehicle Fitment List:

This module is compatible with the following vehicles and options:

  • โœ” Cadillac ATS (2014-2016)
  • โœ” Cadillac CTS (2014-2016)
  • โœ” Cadillac Escalade / ESV (2015-2016)
  • โœ” Cadillac XTS (2014-2016)
  • โœ” Chevrolet Camaro (2016)
  • โœ” Chevrolet Colorado (2015-2016)
  • โœ” Chevrolet Corvette (2014-2016)
  • โœ” Chevrolet Silverado 1500 (2014-2016)
  • โœ” Chevrolet Suburban 1500 (2015-2016)
  • โœ” Chevrolet Tahoe (2015-2016)
  • โœ” GMC Canyon (2015-2016)
  • โœ” GMC Sierra 1500 / Denali 1500 (2014-2016)
  • โœ” GMC Yukon / Yukon XL 1500 (2015-2016)

Note: Please match your part number or confirm fitment with your vehicle’s specific options as listed in the detailed compatibility chart. If you have any questions, our team of experts is here to help.

Condition

Refurbished

Genuine OEM

Yes

MPN

12672963

Interchange part number

PartNumber

590

Model

Yukon Xl 1500

Year

2016

Brand

GM

Manufacturer Part Number

, , , , , , ,

Hardware Type

Scroll to Top