2015-2016 Yukon Engine Control Module ECM 12662034 Programmed to your VIN

Restore Your 2015-2016 Yukon’s Performance!

Experiencing stalling, no-start, or check engine lights? This genuine GM ECM comes fully programmed to your vehicle’s VIN with the latest software updates. It’s a direct-fit solution that saves you a trip to the dealer. Fix your issue today!

$174.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08396-41 Categories: ,
Guaranteed Safe Checkout

Is Your 2015-2016 Yukon Acting Up? Let’s Talk ECM Failure.

As a tech who’s spent two decades with my hands on GM trucks, I know the signs of a failing Engine Control Module (ECM) like the back of my hand. Your 2015 or 2016 GMC Yukon is a sophisticated machine, but its brainโ€”the ECMโ€”is susceptible to failure. You might be experiencing a frustrating mix of symptoms: the engine cranks but won’t start, it stalls randomly at a stoplight, or the dreaded “Reduced Engine Power” message pops up, leaving you stranded. These aren’t just annoyances; they’re classic indicators that the central computer is malfunctioning.

The ECM, located in the harsh environment of the LH front engine compartment, endures constant heat cycles and vibration. Over time, this stress can cause microscopic cracks in solder joints or failure of internal electronic components, leading to the erratic behavior you’re seeing.

A Real-World Scenario from My Shop

A customer’s 2015 Yukon came in last week with these exact symptoms. It had a persistent check engine light with a handful of communication codes (U-codes) and a throttle body performance code (P2101). We checked the wiring, tested the throttle body, and everything pointed back to the main computer. The internal processors were failing, sending corrupt data across the vehicle’s network. Swapping in a correctly programmed ECM wasn’t just a part replacement; it was a complete restoration of the vehicle’s nervous system. The codes vanished, and the truck ran perfectly.

The Dealership-Free Solution: Programmed & Ready to Install

This is where our service changes the game. This isn’t just a part in a box. This is a complete, ready-to-install solution. We are providing a genuine GM Engine Control Module, part number 12662034, that we will professionally program (or “flash”) to your Yukon’s specific Vehicle Identification Number (VIN) before it ever leaves our facility. This critical step ensures the ECM has the latest GM software updates and is perfectly matched to your vehicle’s factory optionsโ€”from the engine and transmission to the emissions equipment.

Why is this so important? Without programming, the module is a blank slate; it won’t start the vehicle or communicate with other modules. By handling the programming for you, we eliminate the need for an expensive trip to the dealership and the high cost of their programming labor.

Key Symptoms of a Failing 2015-2016 Yukon ECM:

  • โœ” Check Engine Light (CEL) with various communication or processor-related fault codes.
  • โœ” Engine cranks but refuses to start.
  • โœ” Intermittent stalling, especially when coming to a stop or at idle.
  • โœ” “Reduced Engine Power” or “Service Stabilitrak” messages on the dash.
  • โœ” Noticeable drop in fuel economy.
  • โœ” Harsh or erratic transmission shifting.
  • โœ” Problems with other electronic systems that rely on the ECM for data.

Installation & Post-Install Notes

Physically replacing the ECM is straightforward for a DIYer with basic tools. It’s typically mounted on the driver’s side of the engine bay. After disconnecting the battery, you simply unplug the electrical connectors, unbolt the old module, and install the new one. However, please be aware: after installing this pre-programmed module, your vehicle may require a Crankshaft Position Variation Relearn (also known as a CASE Relearn) using a compatible high-level scan tool. This procedure synchronizes the new ECM with the engine’s crankshaft sensor for optimal timing and misfire detection. Many vehicles will start and run without it, but to clear certain DTCs and ensure perfect operation, this final step is often necessary.

Guaranteed Compatibility

This module is a direct replacement for a wide range of GM vehicles. Please verify your original part number against this list. This ECM, part #12662034, is interchangeable with the following part numbers:

  • โœ” 12692067
  • โœ” 12676230
  • โœ” 12656993
  • โœ” 12672537
  • โœ” 12673195
  • โœ” 12663391
  • โœ” 12672963
  • โœ” 12669318

This part is confirmed to fit the following vehicles:

GMC YUKON (2015-2016), Cadillac Escalade / ESV (2015-2016), Chevrolet Tahoe / Suburban (2015-2016), Chevrolet Silverado 1500 (2014-2016), GMC Sierra 1500 / Denali 1500 (2014-2016), Chevrolet Corvette (2014-2016), Chevrolet Camaro (2016), Cadillac ATS / CTS / XTS (2014-2016), and Chevrolet Colorado / GMC Canyon (2015-2016). Please check the detailed fitment data to confirm your specific engine and options.

Condition

Refurbished

Genuine OEM

Yes

MPN

12662034

Interchange part number

PartNumber

590

Model

YUKON

Year

2016

Brand

GM

Manufacturer Part Number

, , , , , , ,

Hardware Type

Scroll to Top