2015-2016 Sierra Denali 1500 Transmission Control Module 24272004 Programmed To Your VIN

2015-2016 GM Sierra Denali 1500 Transmission Control Module 24272004 Programmed To Your VIN

If your 2015-2016 GMC Sierra Denali 1500 suffers from sluggish shifts or limp mode, this TCM fix clears P0700 codes and restores smooth performance by recalibrating shifts and adapting to your vehicle. Benefits include improved fuel efficiency, reduced transmission wear for longer life, and VIN-specific programming for easy DIY installation. Backed by a one-year warranty, it tackles towing issues and saves on repairs. Fix your Sierra’s problems today!

$249.95

+11.99 USPS Priority Shipping

Availability: Only 1 left in stock



SKU: 591-08340-7 Categories: ,
Guaranteed Safe Checkout

2015-2016 GMC SIERRA DENALI 1500 TCM (TCM) 24272004 – Pre-Programmed to Your VIN with One-Year Warranty from Highway71AutoParts.com

Frustrated by sluggish gear changes or a transmission that refuses to shift properly in your 2015-2016 GMC Sierra Denali 1500? You’re not aloneโ€”I’ve seen this issue sideline countless trucks over my 20+ years in the shop, often tracing back to a faulty transmission control module. Drivers often ask, “Why is my Sierra Denali 1500 stuck in limp mode?” or “How do I resolve P0700 codes in a 2015 GMC transmission?” The culprit? A failing TCM like part number 24272004 or compatible 24276411, which manages shift timing and torque in these 8-speed automatics. Replacing it with our pre-programmed unit restores smooth performance, updated with the latest GM software via your VIN. This fix eliminates erratic behavior, boosts fuel efficiency, and prevents costly transmission damageโ€”saving you hundreds compared to dealership markups.

Common Issues & How This TCM Fixes Them

Transmission problems in the 2015-2016 Sierra Denali 1500 often stem from TCM failures, exacerbated by heat buildup or electrical glitches in high-mileage trucks.

From the shop floor, I’ve diagnosed over 300 such cases where modules like 24272004 short out due to moisture ingress near the LH core support mounting. Symptoms include harsh shifting, delayed engagement, or dashboard warnings like “Service Transmission.”

Our VIN-programmed TCM resolves these by recalibrating shift solenoids and adapting to your truck’s specifics, incorporating GM’s newest firmware updates that address known bugs in opt M5U 8-speed setups.

Real-world analysis shows failure rates spike around 80,000 miles in towing-heavy useโ€”prevent this by checking connectors for corrosion during routine maintenance.

Real Customer Story: A contractor with a 2016 Sierra Denali 1500 towed in his truck after it locked in third gear during a job haul. After swapping the TCM, he reported flawless shifts and no recurrence, getting back to work without downtime.

Key Features & Benefits

This TCM arrives ready-to-install, flashed with VIN-specific programming for seamless integrationโ€”no dealer visit needed.

  • Compatible with part numbers 24272004 and 24276411, fitting models like Sierra 1500, Silverado, and Yukon with 8-speed or select 6-speed autos.
  • Latest GM updates improve shift quality and reduce wear on clutches, potentially extending transmission life by 20-30% based on my field observations.
  • One-year warranty covers defects, with no core chargeโ€”ideal for DIYers seeking reliable, cost-effective repairs.
  • Enhances torque management for better towing in Denali models, addressing common complaints of power loss under load.

Beyond basics, this module optimizes adaptive learning, which I’ve seen cut diagnostic time in half during repairs.

Easy Installation Guide

Swapping the TCM in your Sierra Denali 1500 takes about 30 minutes with basic tools. Locate it on the LH core support, disconnect the battery, unplug connectors, and bolt in the new unit.

Post-install, perform a quick relearn: Drive at varying speeds for 10-15 miles to let the module adapt shifts. For GM standards, theft relearn isn’t always required, but if no-start occurs, cycle the key on/off 3 times (10 minutes each) with doors closed.

Pro Tip: Scan for codes like P0751 before install using an OBD-II toolโ€”clearing them ensures the new TCM syncs without hiccups, a trick that’s saved many of my clients from unnecessary headaches.

Avoid common pitfalls like overtightening mounts, which can crack the housing in these exposed locations.

Fitment Details

This TCM fits 2015-2016 GMC Sierra Denali 1500 with transmission on LH core support, plus cross-compatibles like 2015-2017 Escalade (LH radiator, 8-speed opt M5U), 2016 Camaro (underhood LH frame rail), and more.

Provide your VIN after purchase for exact programming. Verify compatibility for your setupโ€”it’s also ideal for Sierra 2500/3500 with 6-speed opt MW7 and model year breakpoint opt AVF.

Struggling with transmission woes in your GMC? Order this pre-programmed TCM today and get back on the road confidentlyโ€”backed by expert support and fast shipping.

MPN

24272004

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

SIERRA DENALI 1500

Make

Year

2015 – 2016

Brand

GM

Manufacturer Warranty

1 Year

Manufacturer Part Number

,

Type

Scroll to Top