Restore Full Functionality to Your GM Vehicle
Are you experiencing a host of frustrating and seemingly unrelated electrical problems in your GM car, truck, or SUV? Issues like malfunctioning power windows, erratic door locks, a faulty security system, or even a vehicle that refuses to start can often be traced back to a single component: a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it malfunctions, it can disrupt countless functions. This replacement BCM, programmed specifically for your vehicle via our mail-in cloning service, is the definitive solution to restore your vehicle’s electronic systems to perfect working order.
Is Your GM Body Control Module Failing?
A faulty BCM can manifest in numerous ways, often leading to confusion during diagnosis. If your vehicle is exhibiting any of the following symptoms, a failing BCM is the likely cause:
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ The security system or anti-theft light stays on, preventing the engine from starting.
- ✔ Interior or exterior lights (headlights, dome lights, dash lights) behaving erratically.
- ✔ The radio or infotainment system randomly turns on or off.
- ✔ Wipers operating incorrectly or not at all.
- ✔ False warnings or error messages appearing on the instrument cluster.
- ✔ A parasitic battery drain that leaves you with a dead battery overnight.
The Simple, Dealer-Free Solution: Our Mail-In Cloning Service
Forget about expensive dealership visits, towing fees, and the high cost of programming a new module from scratch. Our unique cloning service makes this repair straightforward and cost-effective. We transfer the critical data from your original BCM directly onto this replacement unit, making it a true plug-and-play solution. All your vehicle’s specific settings, security information, and key data are perfectly preserved.
The process is simple:
- Place Your Order: Complete your purchase through our secure checkout.
- We’ll Contact You: We will reach out with clear, easy-to-follow instructions for removing and shipping your original BCM to our facility.
- Ship Your Module: Send us your original BCM.
- We Clone & Ship Back: Upon receipt, our technicians will clone all data to the replacement module and ship it back to you, typically within 1-2 business days.
Post-Installation Checks
Because our service clones your original data, this module is designed to be plug-and-play. However, in some GM vehicles, certain systems may require a relearn procedure after the BCM is reconnected. Please be aware of the following potential requirements:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to synchronize the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light operation and stability control function, a brake pedal position sensor recalibration may be needed on certain models.
Always consult a factory service manual or a qualified technician if you are unsure about these procedures.
Guaranteed Compatibility
This module is a direct replacement for several part numbers, ensuring a perfect fit and function for a wide range of 2015-2016 GM vehicles. It is compatible with the following part numbers:
13592137, 13506935, 13506936, 13587704, 13594764
It fits models such as the Corvette, Impala, Sierra, Silverado, Suburban, Tahoe, Yukon, XTS, ATS, CTS, Escalade, and Sonic. Please verify your part number and check the fitment list to ensure this is the correct part for your vehicle.
Frequently Asked Questions
What is a BCM cloning service?
Cloning is the process of reading the essential vehicle-specific data (like VIN, key information, and security settings) from your original BCM and writing it directly onto the replacement module. This makes the replacement unit a plug-and-play part, avoiding the need for expensive dealership programming.
How long does the entire process take?
Once we receive your original module, our cloning service is typically completed within 24-48 hours. The total time will depend on shipping times to and from our facility. We will provide you with a tracking number as soon as your programmed module is on its way back to you.
Do I need to send my keys with the module?
No, you do not need to send your keys. Our cloning process transfers all the necessary key data from your old module to the new one, so your existing keys will work seamlessly upon installation.
What if my original BCM is severely damaged or unreadable?
In most cases, even with significant electrical failure, we can still retrieve the necessary data. However, if the module has severe physical damage (fire, flood, etc.) that has destroyed the memory chip, cloning may not be possible. Please contact us if you have concerns about the condition of your module.
Is this a guaranteed fix for my vehicle’s electrical problems?
This service corrects issues directly caused by a faulty BCM. While the symptoms listed are strong indicators of BCM failure, we always recommend a proper diagnosis by a qualified technician to rule out other potential causes like wiring issues or faulty sensors.