2015-2016 Escalade ESV ECM Engine Control Module 12676230

Restore Your Engine’s Brainpower

Eliminate check engine lights and poor performance with this pre-programmed Engine Control Module for your 2015-2016 Escalade ESV. We flash it with the latest GM software using your VIN, ensuring a perfect, plug-and-play fit. Order today to restore your vehicle’s reliability and power.

$174.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-08396-130 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your Cadillac

Is your 2015 or 2016 Cadillac Escalade ESV suffering from mysterious and frustrating issues? An illuminated check engine light, poor fuel economy, erratic shifting, or even a no-start condition can often be traced back to a single, critical component: the Engine Control Module (ECM). As the central computer for your vehicle’s powertrain, the ECM is responsible for managing everything from fuel injection and ignition timing to transmission shift points and emissions controls. When it begins to fail, the symptoms can be widespread and difficult to diagnose. This genuine GM Engine Control Module, part number 12676230, is the definitive solution to restore your vehicle’s factory performance, reliability, and efficiency.

From the Diagnostic Bay

We had a 2015 Sierra 1500 (which uses the same family of ECMs) come into the shop with a complaint of intermittent stalling and a whole host of unrelated trouble codes—U-codes for lost communication, P-codes for random misfires, and even a transmission code. The owner had already replaced the battery, alternator, and a couple of sensors with no success. After verifying power and ground to the ECM were solid, we monitored the 5-volt reference circuits with an oscilloscope and saw significant electrical noise and voltage drops. This pointed directly to an internal failure in the ECM. We installed one of these pre-programmed modules, performed the security relearn, and the truck ran perfectly. All the ghost codes vanished, and the stalling issue was completely resolved. It saved the customer from throwing more parts at a problem that was computer-related from the start.

Is Your Escalade’s ECM Failing?

A faulty engine computer can manifest in numerous ways. If you’re experiencing any of the following, a failing ECM could be the culprit. Look for these common indicators:

  • ✔ Persistent Check Engine Light (CEL) with various or hard-to-diagnose codes.
  • ✔ Engine performance issues such as rough idling, stalling, or hesitation.
  • ✔ Noticeable decrease in fuel efficiency.
  • ✔ Harsh or erratic automatic transmission shifting.
  • ✔ The engine cranks but refuses to start.
  • ✔ Communication errors with diagnostic scan tools.
  • ✔ Unexplained warning lights on the dashboard for traction control or other systems.

The Importance of a Programmed 2015-2016 Escalade ESV ECM

In modern vehicles, the ECM is not a one-size-fits-all component. Each module is specifically calibrated for the vehicle’s unique configuration, including its engine size, transmission type, emissions equipment, and other factory options. This information is stored using the Vehicle Identification Number (VIN). Installing an unprogrammed or incorrectly programmed module will result in a no-start condition at best, and potential damage to other components at worst. Our service eliminates this complexity. We take your VIN and flash this module with the latest, most up-to-date software directly from General Motors. This ensures that when you receive your 2015-2016 Escalade ESV ECM, it is a true plug-and-play part, ready to integrate seamlessly with your vehicle’s systems. This process corrects software bugs from the original programming and ensures optimal performance and longevity.

Simple, Hassle-Free Process

We’ve streamlined the replacement process to get you back on the road quickly:

  1. Place Your Order: Add this module to your cart and complete the checkout process.
  2. Provide Your VIN: After your purchase, simply send us your vehicle’s 17-digit VIN. This is crucial for the programming service.
  3. We Program & Ship: Our technicians will flash the module with the correct GM software for your specific vehicle. We then ship the ready-to-install part directly to you.
  4. Install & Drive: Once you receive the module, simply disconnect the battery, swap the old module with the new one, and reconnect the battery. In most cases, a simple security relearn procedure (often called a ‘key cycle’) is all that’s needed to finalize the installation.

This module is a direct replacement for part number 12676230 and is also compatible with a wide range of other GM part numbers, including 12692067, 12656993, 12662034, 12672537, and more. It fits a variety of popular GM trucks, SUVs, and performance cars from 2014-2016, such as the Silverado 1500, Sierra 1500, Tahoe, Yukon, Corvette, and Camaro. Restore the heart of your vehicle’s electronics with a reliable, professionally programmed 2015-2016 Escalade ESV ECM.

Frequently Asked Questions

Do I need to get this ECM programmed by a dealer?

No. The main benefit of our service is that we handle all the programming for you before we ship the part. Using your vehicle’s VIN, we load the latest GM-certified software onto the module, so it arrives ready for installation.

Where is the ECM located on my 2015-2016 Escalade ESV?

On the 2015-2016 Cadillac Escalade ESV, as well as most of the compatible GM trucks and SUVs like the Silverado, Sierra, Tahoe, and Yukon, the ECM is typically located in the engine compartment on the left-hand (driver’s) side, often near the firewall or inner fender.

Will this fix my check engine light?

If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue. It is crucial to have a proper diagnosis performed to confirm that the ECM is the root cause of the problem before ordering.

What is a security relearn procedure?

A security relearn, or key cycle, is a simple procedure that synchronizes the new ECM with your vehicle’s anti-theft system. It usually involves turning the key to the ‘ON’ position for 10-15 minutes, then ‘OFF’ for a few seconds, and repeating this process three times. Specific instructions for your vehicle can be easily found online.

How do I provide my VIN after purchase?

After you complete your order, you will receive an email with instructions on how to reply with your 17-digit VIN. You can also add it as a note during the checkout process. We cannot program or ship the module without it.

Is this compatible with other vehicles besides the Escalade?

Yes. This ECM, part number 12676230, is compatible with a wide array of 2014-2016 GM vehicles, including the Chevrolet Silverado, GMC Sierra, Corvette, Camaro, Tahoe, Suburban, and more. The programming we perform makes it specific to the VIN you provide.

Condition

Refurbished

Year
Genuine OEM

Yes

MPN

12676230

Interchange part number

PartNumber

590

Model

Escalade Esv

Year

2016

Brand

GM

Manufacturer Part Number

, , , , , , ,

Hardware Type

Scroll to Top