Is Your Chevrolet Impala Experiencing Strange Electrical Problems?
If your 2014 Impala is acting possessed—with flickering lights, malfunctioning power windows, a dead instrument cluster, or random warning lights illuminating your dash—you’re likely dealing with a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, managing everything from interior lighting and security systems to power locks and climate control. When it fails, it can create a cascade of confusing and frustrating issues that can be difficult to diagnose.
Don’t let a faulty BCM keep you off the road or lead to an expensive and time-consuming visit to the dealership. We offer a simple, effective, and reliable solution: a replacement BCM programmed specifically for your vehicle using the data from your original module. This is not a generic, off-the-shelf part; it’s a direct-fit component prepared to be plug-and-play, restoring full functionality to your vehicle without the need for additional dealer programming.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, locks, or mirrors.
- ✔ Erratic instrument cluster behavior, with gauges dropping out or warning lights appearing randomly.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ Malfunctioning climate control system.
- ✔ Vehicle security system acting up, causing false alarms or no-start conditions.
- ✔ Key fob not being recognized by the vehicle.
- ✔ Communication errors with other vehicle modules (DTCs like U-codes).
How Our Simple Programming Service Works
Getting your vehicle back to perfect working order is a straightforward process. This listing is for a replacement 2014 Impala Body Control Module that is delivered ready for installation through our professional cloning service.
- Place Your Order: Complete your purchase through our secure checkout. Ensure your contact information is accurate.
- We Contact You: Our team will reach out to you with clear, step-by-step instructions and a shipping address to send your original BCM to us.
- Ship Your Original BCM: Carefully package and ship your original module to our facility.
- We Program Your Replacement: Upon receiving your module, our technicians will professionally transfer all the critical vehicle-specific data (including VIN, key data, and option configurations) to the replacement unit.
- We Ship It Back: We will ship your newly programmed BCM back to you, typically within 1-2 business days. You’ll receive tracking information as soon as it’s on its way.
This service ensures the replacement BCM is a perfect match for your car’s unique configuration, making the installation process as simple as swapping the part. No core charge is required; you can keep your original module.
Post-Installation Information
While our programming service makes this a plug-and-play solution, some vehicle systems may require a recalibration or sync procedure after the new module is installed. These are simple procedures for any qualified technician with a professional-grade scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the new BCM with the airbag system. This is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and traction control performance.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This Body Control Module is a direct replacement for the following part numbers:
- 13580689
- 13586589
- 13589093
It is compatible with the following vehicles:
- 2013 Cadillac ATS (located on firewall)
- 2013 Cadillac XTS (located on left front hinge pillar)
- 2013-2014 Chevrolet Sonic (located in RH rear quarter panel)
- 2014 Chevrolet Impala (VIN 1, New Style, located on LH dash)
Order your programmed 2014 Impala Body Control Module today and put an end to frustrating electrical issues for good!
Frequently Asked Questions
What is a BCM cloning service?
Cloning is the process of transferring the vehicle-specific software, VIN, and security information from your original BCM to a replacement unit. This makes the replacement module plug-and-play, avoiding the need for expensive and complex programming at a dealership.
How long does the programming process take?
Once we receive your original BCM, our technicians typically complete the programming and prepare the replacement for shipment within 1-2 business days.
Is this difficult to install myself?
The physical installation is straightforward for someone with basic mechanical skills, as it’s just a matter of unplugging the old module and plugging in the new one. However, some post-install procedures, like an airbag sync, may require a professional scan tool. We always recommend installation by a qualified technician.
Will this fix my specific electrical problem?
This part is a solution for a faulty BCM. While the symptoms we’ve listed are common indicators of BCM failure, we strongly recommend a proper diagnosis by a professional mechanic to confirm the BCM is the root cause of your issues before ordering.
What if my original BCM is completely dead or ‘fried’?
In many cases, even if the BCM is non-functional in the vehicle, our technicians can still extract the necessary data from the memory chip. Please contact us with details about your module’s condition if you have concerns.
Do I need to send you my keys?
No, you do not need to send us your keys. All the necessary immobilizer and key data is stored within your original BCM, and we will transfer it directly to the replacement module. Your existing keys will work seamlessly after installation.