Restore Full Electronic Functionality to Your GM Vehicle
Are you experiencing bizarre electrical issues in your 2014 Cadillac XTS or another compatible GM vehicle? Flickering lights, malfunctioning power windows, a security system that acts on its own, or strange warning messages on your dash are all classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it fails, it can create a cascade of frustrating and seemingly unrelated problems. This listing offers a simple, effective, and dealership-free solution: a replacement BCM, part number 13594768, that is professionally programmed with the data from your original module.
Common Symptoms of a Failing BCM
If your vehicle is exhibiting any of the following symptoms, a faulty BCM could be the culprit. Don’t let these issues go unresolved, as they can affect vehicle safety and security.
- ā Intermittent or non-functional headlights, taillights, or interior lights.
- ā Power windows, door locks, or mirrors operating erratically or not at all.
- ā The vehicle’s security system or keyless entry failing to work correctly.
- ā False warnings on the instrument cluster (e.g., ‘Service Theft System’).
- ā Inability for diagnostic scan tools to communicate with the module.
- ā Battery drain while the vehicle is parked.
- ā Wipers or horn activating unexpectedly.
The Simple Plug-and-Play Solution: Our Cloning Service
Forget expensive dealership visits, programming fees, and vehicle downtime. Our professional cloning service makes this repair straightforward. Hereās how it works: you purchase this service, and we will provide instructions for you to ship your original BCM to our facility. Once we receive it, our technicians will extract the unique vehicle-specific dataāincluding VIN, key information, and other security parametersāand flash it directly onto this replacement module. We then ship the fully programmed BCM back to you. The result is a true plug-and-play part. Simply install it, and your vehicle is back to normal without any additional programming required.
What to Expect After Installing Your 2014 XTS BCM
Installation is typically straightforward, as the module is pre-programmed for your vehicle. However, in some cases, specific systems may require a relearn or synchronization procedure. Please be aware of the following potential post-installation steps:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary. This requires a professional-grade scan tool to sync the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure correct brake light operation and to satisfy the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for a Wide Range of GM Vehicles
This Body Control Module is a direct replacement for part numbers 13594692, 13594768, 13593214, 13580690, 13591519, and 13594769. It is compatible with the following makes and models:
- Cadillac ATS (2014)
- Cadillac CTS (2014)
- Cadillac Escalade / ESV (2015)
- Cadillac XTS (2014)
- Chevrolet Corvette (2014)
- Chevrolet Impala (2015-2019)
- Chevrolet SS Caprice / Caprice (2014-2017)
- Chevrolet Silverado 1500/2500/3500 (2014-2015)
- Chevrolet Suburban 1500 (2015)
- Chevrolet Tahoe (2015)
- GMC Sierra 1500/2500/3500 & Denali Models (2014-2015)
- GMC Yukon / Yukon XL 1500 (2015)
Frequently Asked Questions
What exactly does the Body Control Module (BCM) do?
The BCM acts as the central computer for your vehicle’s comfort and convenience electronics. It controls functions like your power windows, locks, interior and exterior lighting, security system, wipers, and communicates with other modules throughout the vehicle.
How does the cloning service work?
After you place your order, we will contact you with instructions to send us your original BCM. We then use specialized equipment to read the vehicle-specific data from your module and write it onto the replacement unit. We ship the programmed replacement back to you, ready for installation.
Why is this better than buying a new BCM from a dealer?
Our service saves you significant money and hassle. You avoid the high cost of a new module from the dealership, expensive programming fees, and the need to have your vehicle towed or left at the service center. This is a direct, plug-and-play fix.
Will I need to perform any programming myself?
No, the module arrives fully programmed for your vehicle. However, as noted above, some vehicles may require a simple relearn procedure for the airbag or brake pedal position sensor, which can be performed with a compatible high-level scan tool.
How long does the entire process take?
Once we receive your original module, our programming service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We provide tracking information as soon as your programmed module is on its way back to you.
What if my original BCM is completely dead or unreadable?
In most cases, even with significant damage, we can still retrieve the necessary data. If your module is completely unreadable due to severe fire or water damage, please contact us before ordering to discuss potential options.