2014-2016 SRX Body Control Module BCM 13593776 Programmed

Plug-and-Play BCM Solution for Your Cadillac

Get a fully programmed Body Control Module for your 2014-2016 Cadillac SRX. We transfer all data from your original BCM to this replacement unit, making installation simple with no dealer programming needed. Restore full functionality to your vehicle’s electronics. Order today to get started!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-04001-80 Categories: , ,
Guaranteed Safe Checkout

Restore Full Electronic Functionality to Your Cadillac SRX

Are you experiencing a cascade of frustrating electrical problems in your 2014, 2015, or 2016 Cadillac SRX? Issues like erratic power windows, flickering dashboard lights, a malfunctioning key fob, or a security system that acts on its own are often not isolated failures. They frequently point to a single, critical component: a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can make your luxury vehicle feel unreliable. This listing offers a straightforward, cost-effective solution: a replacement 2014-2016 SRX Body Control Module that arrives at your door fully programmed and ready for installation.

From the Diagnostic Bay
We had a 2015 SRX come in that was a complete ghost story for the owner. The horn would honk randomly, the interior lights would stay on draining the battery, and the remote start was completely non-functional. The owner had already replaced the battery and checked all the fuses. After connecting our diagnostic tool, we saw multiple communication errors all pointing back to the BCM. Instead of a costly new module and days of programming at the dealership, we performed a cloning service just like this one. The customer was back on the road the next day with all issues resolved. A failing BCM can manifest in the strangest ways, but the solution is often simpler than you think.

Is Your 2014-2016 SRX Body Control Module Failing?

The BCM manages a wide array of non-engine-related functions. A malfunction can cause a variety of symptoms that may seem unrelated at first. If you’re noticing several of these issues, your BCM is the likely culprit.

  • ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or not turning on.
  • ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
  • ✔ Key fobs that are no longer recognized by the vehicle.
  • ✔ Warning lights for various systems (like ABS or Airbag) appearing on the dash without a clear cause.
  • ✔ Wipers or radio turning on and off by themselves.
  • ✔ Inconsistent or non-functional climate control systems.

Our Simple, Plug-and-Play Programming Service

Forget expensive dealership visits and the hassle of programming a new module from scratch. Our service is designed to be the easiest path to getting your vehicle back to 100%. Here’s how it works:

  1. Place Your Order: Purchase this BCM. Ensure your contact information is up-to-date.
  2. We Contact You: Our team will reach out with simple instructions and a shipping address for you to send us your original BCM.
  3. Send Us Your Original BCM: Carefully package and ship your vehicle’s original Body Control Module to our facility.
  4. We Clone The Data: Upon receipt, our technicians will perform a full data transfer. We extract the vital information—including your vehicle’s VIN, key programming, and specific electronic settings—from your original module and flash it onto this replacement unit.
  5. We Ship It Back: We ship the programmed replacement BCM back to you, typically within 1-2 business days. You will receive tracking information once it’s on its way.

The result is a true plug-and-play module. Because it contains your vehicle’s exact data, the car will recognize it as the original, eliminating the need for any further programming or initialization procedures at a dealership.

Installation and Post-Install Considerations

Physical installation is straightforward for a DIYer with basic tools or any professional mechanic. The BCM on the 2014-2016 SRX is typically located behind the left side of the dashboard. Always disconnect the vehicle’s battery before removing or installing any electronic modules.

While our programming service makes this a plug-and-play part, some vehicle systems may require a simple sync procedure after installation:

  • Airbag System Sync: In some cases, the airbag warning light may illuminate after the BCM is replaced. This is because the BCM and the SDM (Sensing and Diagnostic Module) need to re-establish communication. A ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool to resolve this. This is only necessary if the light is on.
  • Brake Pedal Position Relearn: A brake pedal position sensor recalibration might be needed to ensure correct brake light operation and to satisfy the traction control system. This is also performed with a capable diagnostic tool.

Disclaimer: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.

Guaranteed Fitment

This module is a direct replacement for a wide range of GM vehicles and part numbers. Please verify that your original module’s part number is on this list:

Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564

This part will fit these makes and models with these options:

  • CADILLAC SRX 14-16 Body Control (BCM); (LH dash)
  • CADILLAC ELR 14-16 Body Control (BCM); (RH cowl)
  • BUICK LACROSSE 14-16 Body Control (BCM); (LH kick panel)
  • BUICK REGAL 14-17 Body Control (BCM); (LH dash)
  • CHEVROLET CAMARO 14-15 Body Control (BCM); (RH dash)
  • CHEVROLET MALIBU 14-15 Body Control (BCM); (LH kick panel)
  • CHEVROLET MALIBU 16 Body Control (BCM); VIN 1 (4th digit, Limited), (LH kick panel)
  • CHEVROLET SPARK 14-16 Body Control (BCM); (left lower a-pillar), electric model (EV)
  • CHEVROLET VOLT 14-15 Body Control (BCM); (RH engine compartment)

Frequently Asked Questions

What exactly does the Body Control Module do?

The BCM acts as the central computer for your vehicle’s body electronics. It controls functions not related to the engine, such as power windows, locks, lights, security system, wipers, and climate control.

How does this programming service work?

You send us your original BCM. We use specialized equipment to read all the vehicle-specific data (like VIN, mileage, and key information) from your module and transfer it to the replacement unit we provide. This makes the replacement a perfect electronic match for your car.

Is this truly a ‘plug-and-play’ installation?

Yes, for over 95% of installations. Because we clone your original data, the vehicle will accept the new module without needing a trip to the dealer for programming. In rare cases, a simple relearn procedure, like for the airbag system, may be needed as outlined above.

What happens if I don’t send in my original module?

This service cannot be completed without your original module. The data contained within it is essential for programming the replacement. The module you receive will not function if we cannot clone your original.

Where is the BCM located on my 2014-2016 Cadillac SRX?

On the 2014-2016 SRX, the Body Control Module is typically found on the driver’s side, behind the dashboard near the steering column (LH dash).

Do I need to return this module after I install it?

No. There is no core charge for this part. You can keep your original, non-working module.

Year
Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2014

Make

Model

SRX

Brand

GM

MPN

13593776

Manufacturer Part Number

, , , , , , , , , ,

Manufacturer Warranty

1 Year

Scroll to Top