Restore Your Vehicle’s Electrical Functions with a Plug-and-Play BCM
Is your Chevrolet Malibu or other GM vehicle suffering from bizarre electrical issues? Flickering lights, malfunctioning power windows, a haywire security system, or random warning lights on your dash are all classic signs of a failing Body Control Module (BCM). The BCM acts as the central command center for your car’s body electronics, and when it fails, it can create a cascade of frustrating and unpredictable problems. Dealerships often charge a fortune for a new module plus expensive programming fees. Our solution bypasses that completely.
This is a replacement Body Control Module that comes fully programmed and ready for installation. We achieve this through a professional cloning service. You simply send us your original BCM, and we transfer all the critical vehicle-specific data—including VIN, key information, and option configurations—to this replacement unit. The result is a true plug-and-play module that restores your vehicle’s functionality without requiring any additional programming or trips to the dealer. It’s the most efficient and cost-effective way to solve your BCM problems.
From the Diagnostic Bay
We had a 2015 Chevy Malibu come into the shop with a list of symptoms that sounded like the car was haunted. The dome lights wouldn’t turn off, the driver’s side power window worked only when it wanted to, and the key fob would intermittently fail to lock the doors. The owner was convinced it was a wiring nightmare. After running diagnostics, we found multiple communication fault codes all pointing back to one component. By providing a pre-programmed 2014-2016 Malibu BCM, we were able to resolve every single one of his electrical gremlins in one go. The customer was thrilled to have his car back to normal without a massive dealership bill.
Is Your Body Control Module Failing?
A faulty BCM can manifest in numerous ways, often seeming unrelated. If you’re experiencing several of the following issues, your BCM is the likely culprit:
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior or exterior lights flickering, staying on, or not turning on.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Inaccurate gauge readings on the instrument cluster.
- ✔ Key fobs not being recognized by the vehicle.
- ✔ Warning lights (like Airbag or ABS) appearing on the dash without a clear cause.
How Our Simple Cloning Service Works
Getting your vehicle back on the road is a straightforward process:
- Place Your Order: Purchase this BCM through our secure checkout. Ensure your contact information is accurate.
- Receive Instructions: We will contact you via email with detailed instructions on how to safely remove and ship your original BCM to our facility.
- We Handle the Programming: Once we receive your module, our technicians will perform a full data transfer to the replacement unit. This process clones your vehicle’s unique identity, making the new module a perfect match.
- Install and Drive: We ship the programmed BCM back to you. Installation is as simple as disconnecting the old module and plugging in the new one. No core charge means you can keep your original part.
Post-Installation Procedures
In most cases, this is a direct plug-and-play installation. However, for some vehicles, minor recalibration procedures may be needed to sync related systems. These can often be performed by a local mechanic with a professional scan tool.
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is required to sync the systems. This is only necessary if the light appears.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor might be needed to ensure correct brake light operation and traction control performance.
Please note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Your 2014-2016 Malibu BCM and More
This module is a direct replacement for a wide range of GM vehicles and part numbers. Please verify that your vehicle and part number are listed below.
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
This part will fit these makes and models with these options:
- LACROSSE 14-15: Body Control (BCM); (LH kick panel)
- LACROSSE 16: Body Control (BCM); (LH kick panel), ID 13580698 or 13594564
- MALIBU 14-15: Body Control (BCM); (LH kick panel)
- MALIBU 16: Body Control (BCM); VIN 1 (4th digit, Limited), (LH kick panel)
- VOLT 14-15: Body Control (BCM); (RH engine compartment)
- ELR 14-16: Body Control (BCM); (RH cowl)
- REGAL 14-17: Body Control (BCM); (LH dash)
- CAMARO 14-15: Body Control (BCM); (RH dash)
- SRX 14-16: Body Control (BCM); (LH dash)
- SPARK 14-16: Body Control (BCM); (left lower a-pillar), electric model (EV)
Frequently Asked Questions
What is a BCM cloning service?
Cloning is the process of reading all the vehicle-specific programming (like VIN, mileage, key data, and security information) from your original BCM and writing it directly onto a replacement module. This makes the new module an exact electronic copy of the old one, eliminating the need for dealership programming.
How long does the entire process take?
Once we receive your original module, our service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a return tracking number as soon as your programmed module is on its way back to you.
What if my original BCM is damaged or unreadable?
In most cases, even with significant internal failure, we can still retrieve the necessary data. If your module has extensive water or fire damage, data recovery may not be possible. Please contact us before ordering if you suspect your module is severely damaged.
Do I need special tools for installation?
For most models like the Malibu, the BCM is located in the driver’s or passenger’s side kick panel. Installation typically only requires basic hand tools like a socket set and trim removal tools to access the module. The electrical connectors are simple plug-in types.
Is this guaranteed to fix my vehicle’s problems?
This service corrects all issues directly caused by a faulty BCM. While the symptoms listed are strong indicators of BCM failure, we always recommend a proper diagnosis by a qualified technician to rule out other potential issues like wiring faults or problems with other modules.