Is Your Chevrolet Spark Experiencing Bizarre Electrical Problems?
If you’re dealing with flickering lights, malfunctioning power windows, a security system that acts up, or even a no-start condition, the culprit is often the Body Control Module (BCM). The BCM is the central computer for your vehicle’s body electronics, managing everything from your interior lights and power locks to the anti-theft system. When it fails, it can create a cascade of frustrating and seemingly unrelated issues that are difficult to diagnose.
Don’t let a faulty BCM keep your car off the road or force you into an expensive and time-consuming visit to the dealership. We offer a simple, effective, and affordable solution: a replacement BCM programmed specifically for your vehicle using the data from your original module.
From the Diagnostic Bay
We once had a 2014 Chevy Cruze come in with a classic “gremlin.” The owner complained of a dead battery every few days. We checked for parasitic draws and found an intermittent spike from the interior lighting circuit. The dome light would randomly turn on for a few minutes in the middle of the night. After ruling out switches and wiring, we focused on the BCM. By cloning his original module to one of our replacement units, we solved the problem instantly. The new BCM had perfect control over the circuits, eliminating the parasitic drain and saving the customer from buying a new battery every month.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, and mirrors.
- ✔ Erratic interior or exterior lighting (flickering, staying on, or not working at all).
- ✔ The security system light stays on, or the alarm randomly triggers.
- ✔ Instrument cluster gauges behaving strangely, or warning lights appearing for no reason.
- ✔ Key fobs are not recognized, or the remote start fails.
- ✔ A frustrating no-start condition where the engine may crank but won’t fire due to anti-theft system confusion.
- ✔ Wipers or radio operating on their own.
The Plug-and-Play Solution: Our BCM Programming Service
A new BCM from the dealership requires expensive programming tools to sync it with your vehicle’s unique systems, including your keys and security information. Our service bypasses this completely. We perform a direct data transfer (cloning) from your original BCM to this replacement unit. The result is a module that is 100% plug-and-play. Simply install it, and your car will recognize it as the original, retaining all your keys and vehicle-specific settings.
How Our Simple Programming Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out with clear, easy-to-follow instructions for shipping your original BCM to our facility.
- ✔ Send Us Your Module: Package your original BCM securely and ship it to us.
- ✔ We Program Your Replacement: Upon arrival, our technicians will professionally transfer all necessary data from your old module to the replacement unit.
- ✔ Receive Your Ready-to-Install BCM: We ship the programmed module back to you, typically within 1-2 business days of receiving your original. You’ll receive tracking information so you know exactly when it will arrive.
Installation and Post-Installation Notes
This 2014-2015 Spark BCM is located at the left lower A-pillar. While installation is straightforward, please note a couple of potential post-installation procedures that may be required depending on your vehicle’s specific configuration:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a simple “Setup SDM Primary Key in BCM” procedure is needed. This syncs the new BCM with the airbag system and can be performed with a professional-grade diagnostic tool.
- Brake Pedal Position Relearn: In some cases, a brake pedal position sensor recalibration may be necessary to ensure proper brake light and traction control functionality.
Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Guaranteed Fitment for Multiple GM Models
This BCM is a direct replacement for part number 13589197 and is also compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589324, and 13589325. It fits a wide range of GM vehicles, including:
- 2014-2015 Chevrolet Spark
- 2013-2017 Chevrolet Equinox / GMC Terrain
- 2013-2016 Chevrolet Cruze
- 2013 Chevrolet Volt
- 2013-2014 Buick Encore
- 2013 Chevrolet Malibu
- 2013 Buick Regal
- 2013 Cadillac SRX
- 2013-2014 Chevrolet Orlando
- 2013-2017 Buick Verano
- 2013-2014 Chevrolet Trax
Restore your vehicle’s electronic systems to perfect working order. Order your pre-programmed 2014-2015 Spark BCM today and get back on the road with confidence.
Frequently Asked Questions
What exactly is a BCM cloning service?
Cloning is a process where we extract the vital, vehicle-specific data—like key information, VIN, and security settings—from your original BCM and write it directly onto the replacement module. This makes the new module an identical twin of the old one, ensuring it works perfectly in your car without any additional programming.
Will my existing keys work with this module?
Yes! Because we clone your original data, the replacement BCM will recognize all your existing keys. You will not need to have keys reprogrammed, saving you a significant amount of money and hassle.
How long does the entire process take?
Once we receive your original BCM, our programming service typically takes just 1-2 business days. The total time will depend on shipping speeds to and from our facility. We will provide you with a return tracking number as soon as it ships.
What if my airbag light comes on after I install it?
This is a known possibility. It simply means the BCM and the Supplemental Deployment Module (SDM) need to be re-synchronized. A technician with a professional scan tool can perform the “Setup SDM Primary Key in BCM” procedure to resolve this.
Is this something I can install myself?
For many DIYers, this is a manageable job. The BCM is typically located under the dash and is held in by a few bolts or clips. Basic hand tools are usually all that’s required. However, if you are not comfortable working with vehicle electronics, we recommend professional installation.
Do I need to send my old BCM back after I receive the new one?
No. This service requires you to send your original BCM to us for the data transfer. Once the service is complete, you can keep your original module. There is no core charge or need to return it.