Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you battling strange and frustrating electrical problems in your Chevrolet Spark or other compatible GM vehicle? Issues like flickering lights, malfunctioning power windows, a security system that acts on its own, or a battery that mysteriously drains overnight are often signs of a failing Body Control Module (BCM). The BCM is the central command center for your car’s body electronics, and when it fails, it can create a cascade of confusing and disruptive symptoms. Instead of facing a costly trip to the dealership for a new module and expensive programming, our pre-programmed BCM service offers a simple, effective, and affordable solution.
We recently had a 2015 Chevy Spark towed in with a classic case of BCM failure. The owner was at their wit’s end. The interior lights would stay on, the radio would randomly shut off, and the car wouldn’t always start. They had already replaced the battery twice, assuming that was the issue. After a quick diagnostic scan, we pinpointed the BCM as the culprit. Instead of a lengthy and expensive replacement at the dealer, we used our programming service. By cloning the data from their original, faulty module to a replacement unit, we had them back on the road the next day with a fully functional car. It’s a common story, and this service is the exact solution that saves drivers time, money, and headaches.
Is Your Body Control Module Failing?
A faulty BCM can manifest in numerous ways, often seeming like multiple unrelated problems. If you’re experiencing any of the following, your BCM is the likely cause:
- ✔ Erratic or non-functional interior and exterior lights (headlights, taillights, dome lights).
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ Intermittent issues with the radio or infotainment system.
- ✔ The security system or keyless entry failing to operate.
- ✔ Unexplained battery drain that leaves you with a dead car.
- ✔ Warning lights appearing on the dashboard without a clear cause.
- ✔ Horn honking unexpectedly or not working at all.
Your Direct Solution: The 2014-2015 Spark BCM Programming Service
This listing is for a replacement Body Control Module, part number 13586273, that is professionally programmed with your vehicle’s specific data. This is not just a part; it’s a complete service designed for a seamless installation. We transfer the vital information from your original BCM to this replacement unit, ensuring it communicates perfectly with your vehicle’s other computers. This process makes the replacement completely plug-and-play, eliminating the need for any additional programming or calibration by a dealer.
How Our Simple Mail-In Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout. Please ensure your contact information is accurate.
- ✔ We Contact You: Our team will reach out to you with clear, step-by-step instructions and a shipping address for you to send your original BCM to us.
- ✔ Send Us Your Original BCM: Carefully package and ship your original module to our facility.
- ✔ We Program Your Replacement: Upon receiving your module, our expert technicians will clone all the necessary data to the replacement BCM.
- ✔ We Ship It Back: We will ship your new, plug-and-play BCM back to you, typically within 1-2 business days, and provide you with tracking information.
Installation and Post-Install Notes
Once you receive the programmed module, installation is as simple as removing the old one and plugging in the new one. However, in some GM vehicles, a couple of minor follow-up procedures may be necessary:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system. This is only required if the light is on.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light and traction control operation.
Guaranteed Compatibility
This BCM is a direct replacement for a wide range of GM vehicles and is compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It is confirmed to fit models such as the Chevy Cruze, Equinox, Malibu, Volt, Trax, Orlando, Buick Encore, Verano, Regal, Cadillac SRX, and GMC Terrain from various years. Please verify your part number and check the detailed fitment list to ensure this is the correct part for your vehicle.
Frequently Asked Questions
What does a Body Control Module (BCM) do?
The BCM acts as the central computer for your vehicle’s body electronics. It controls non-engine related functions like power windows, locks, lights, security system, wipers, and more. When it fails, these systems can behave erratically.
Is this BCM truly plug-and-play?
Yes. Because we clone the data from your original module, the replacement BCM we send you is ready for installation without any need for dealer programming. It will have all the correct settings and key information for your specific vehicle.
How does the mail-in programming service work?
After you purchase, we will provide instructions to mail your original BCM to us. We then extract the data and transfer it to the replacement module. We then ship the programmed replacement back to you, ready to be installed.
How long does the entire process take?
Once we receive your original module, our programming service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with tracking information for the return shipment.
What if the airbag light comes on after I install it?
This is a known possibility on some GM vehicles. It simply means the new BCM needs to be electronically ‘introduced’ to the airbag module. A technician with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the systems and turn off the light.
Do I need to return my old BCM as a core?
No, there is no core charge for this service. We only need your original module to perform the data cloning service. You can keep your original module after the service is complete.