Restore Your Chevrolet Spark’s Electrical System
Are you experiencing frustrating and unpredictable electrical problems in your 2014 or 2015 Chevrolet Spark? Issues like flickering lights, unresponsive power windows, erratic dashboard warnings, or even a no-start condition can often be traced back to a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it malfunctions, it can cause widespread chaos. Replacing it isn’t as simple as swapping parts; a new BCM requires expensive dealership programming to sync with your vehicle’s unique identity. Our programming service is the perfect solution, providing you with a fully functional, plug-and-play module without the dealer hassle.
The Simple, Cost-Effective Solution
We take the complexity out of the repair process. This listing is for a replacement BCM that is programmed by cloning the data from your vehicle’s original module. This ensures that all the specific settings, security information, and options for your car are perfectly transferred. The result is a replacement part that is ready for installation right out of the box, saving you hundreds of dollars in dealership programming fees and diagnostic time.
From the Diagnostic Bay
We recently worked on a 2014 Chevy Spark that had its owner completely stumped. The horn would honk randomly, the interior lights wouldn’t turn off, and the key fob worked only intermittently. After confirming the battery and fuses were good, our diagnostics pointed to an internal failure in the BCM. Instead of a costly new module and a tow to the dealer, the owner opted for our cloning service. We transferred the data from the faulty original to this replacement unit. After a straightforward installation, every single electronic function was restored to normal. It’s a testament to how this service turns a complex electronic repair into a manageable DIY-friendly job.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ False warnings or lights appearing on the instrument cluster.
- ✔ Malfunctions with the vehicle’s security or anti-theft system, potentially causing a no-start condition.
- ✔ Wipers or climate control systems operating incorrectly.
- ✔ Key fob losing communication with the vehicle.
How Our Programming Service Works
Our process is designed to be as simple and efficient as possible:
- Place Your Order: Purchase this BCM programming service. Ensure your contact information is accurate.
- We Contact You: We will reach out with clear, step-by-step instructions on how to remove and ship your original BCM to our facility.
- We Program Your Replacement: Once we receive your original module, our technicians will professionally clone all necessary data to the replacement 2014-2015 Spark BCM. This typically takes 1-2 business days.
- Receive Your Ready-to-Install Part: We ship the programmed replacement BCM back to you. Simply install it, and your vehicle’s electronic functions will be restored.
Post-Installation Information
In most cases, the installation is 100% plug-and-play. However, with complex electronic systems, some vehicles may require minor recalibration procedures. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the airbag system with the BCM and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light operation and traction control performance.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment for Multiple Part Numbers
This module is a direct replacement for a wide range of part numbers, ensuring compatibility across various GM models. It is guaranteed to fit and function for the following part numbers:
13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
While this listing is focused on the 2014-2015 Spark BCM, this part also fits other vehicles. Please verify your part number and check the compatibility list below:
- CHEVROLET CRUZE: 2013-2015, 2016 (Limited)
- CHEVROLET EQUINOX: 2013-2017
- CHEVROLET MALIBU: 2013
- CHEVROLET ORLANDO: 2013-2014
- CHEVROLET SPARK: 2014-2015 (gasoline model)
- CHEVROLET TRAX: 2013-2014
- CHEVROLET VOLT: 2013
- BUICK ENCORE: 2013-2014
- BUICK REGAL: 2013
- BUICK VERANO: 2013-2017
- CADILLAC SRX: 2013
- GMC TERRAIN: 2013-2017
Frequently Asked Questions
What if my original BCM is completely dead or unreadable?
In most cases, even if the BCM is failing, we can still extract the necessary data. If your module has severe water or fire damage, please contact us before ordering to discuss options.
How long does the entire process take?
Once we receive your original module, the programming and shipping turnaround is typically 1-2 business days. The total time will depend on your shipping speed to us.
Do I need to go to a dealer after installing this BCM?
No. Our cloning service makes this a plug-and-play part. The goal is to avoid any additional programming or dealer visits, saving you time and money.
Is this a repair service for my original module?
No, this is not a repair service. You will receive a different, fully functional BCM that has been loaded with your vehicle’s original data. You do not need to return a core; you can keep your original module.
Where is the BCM located on a 2014-2015 Spark?
The BCM is typically located at the base of the left lower A-pillar, near the driver’s side kick panel area.
What happens if the airbag light comes on after installation?
If the airbag light appears, it means the BCM and the airbag system (SDM) need to be electronically re-synced. This requires a professional scan tool to perform the ‘Setup SDM Primary Key in BCM’ procedure.