Restore Full Functionality to Your GM Vehicle
Are you dealing with baffling electrical problems in your 2014-2015 Camaro or other compatible GM vehicle? A failing Body Control Module (BCM) is often the culprit behind a host of frustrating issues, from power windows and locks acting up to security system faults and even a no-start condition. The BCM is the central command center for your car’s body electronics, and when it fails, it can feel like the vehicle has a mind of its own. This isn’t just an inconvenience; it can be a major disruption to your daily life.
We offer a straightforward, reliable solution. This listing is for a replacement Body Control Module, part number 13591300, that comes pre-programmed with your vehicle’s specific data. Our professional cloning service transfers all the essential information from your original BCM to this replacement unit. The result? A module that is truly plug-and-play, eliminating the need for expensive dealership programming and complex setup procedures. Simply send us your original module, and we’ll handle the rest, getting you back on the road quickly and affordably.
Case Study: A Tricky Diagnosis
I remember a 2015 Camaro Convertible that came into my shop with a laundry list of complaints. The interior lights would flicker randomly, the driver’s side window wouldn’t drop for the door to close properly, and the anti-theft light would stay on, sometimes preventing it from starting. The owner had already replaced the battery and checked fuses. After hooking up my scanner, I saw a slew of communication codes (U0140, U0155). Instead of chasing individual components, experience pointed me to the central hub: the BCM. A faulty BCM can cause this exact kind of system-wide chaos. A service like this would have been the perfect fix, restoring all functions by cloning the original security and configuration data, saving the customer hundreds over a new, dealer-programmed unit.
Is Your Vehicle Showing These Symptoms?
A failing BCM can manifest in many ways. If you’re experiencing any of the following, this module is likely the solution you need:
- ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
- ✔ The security or anti-theft system light stays on, or the alarm goes off randomly.
- ✔ Intermittent no-start or no-crank conditions.
- ✔ Instrument cluster warning lights (like ABS or Airbag) illuminating without a clear cause.
- ✔ Diagnostic trouble codes (DTCs) related to lost communication with the BCM, such as U0140.
- ✔ Wipers or other accessories activating on their own or not working at all.
A Straightforward Guide to Installation & Service
Our goal is to make this process as simple as possible. Here’s how it works:
- Step 1: Purchase the Service. After you place your order, we will contact you with detailed instructions and the shipping address. Please ensure your contact information is up to date.
- Step 2: Remove Your Original BCM. For the 2014-2015 Camaro, the BCM is typically located behind the right-hand (passenger side) of the dashboard. Always disconnect the negative battery terminal before starting work.
- Step 3: Ship Us Your Module. Carefully package your original BCM and send it to us. We recommend using a tracked shipping service.
- Step 4: We Program Your Replacement. Once we receive your module, our technicians will professionally transfer all necessary data to the replacement unit within 1-2 business days.
- Step 5: Install the New Module. We ship the programmed module back to you. Installation is the reverse of removal. Reconnect your battery, and your vehicle’s body functions should be fully restored.
Important Post-Installation Information
In most cases, this module is a direct plug-in solution. However, due to the complexity of modern vehicle systems, a couple of additional steps may be required in specific situations:
- Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the airbag system with the new BCM and requires a professional-grade scan tool.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure correct brake light operation and traction control performance.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Compatibility
This module is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify your part number or vehicle model from the list below to ensure compatibility.
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
This part will fit these makes and models with these options:
- CAMARO 2014: Body Control (BCM); (RH dash), Conv
- CAMARO 2015: Body Control (BCM); (RH dash)
- LACROSSE 2014-2015: Body Control (BCM); (LH kick panel)
- LACROSSE 2016: Body Control (BCM); (LH kick panel), ID 13580698 or 13594564
- MALIBU 2014-2015: Body Control (BCM); (LH kick panel)
- MALIBU 2016: Body Control (BCM); VIN 1 (4th digit, Limited), (LH kick panel)
- REGAL 2014-2017: Body Control (BCM); (LH dash)
- SRX 2014-2016: Body Control (BCM); (LH dash)
- VOLT 2014-2015: Body Control (BCM); (RH engine compartment)
- ELR 2014-2016: Body Control (BCM); (RH cowl)
- SPARK 2014-2016: Body Control (BCM); (left lower a-pillar), electric model (EV)
Frequently Asked Questions
How does the programming service work?
You purchase this service, then ship your vehicle’s original Body Control Module to us. We extract the unique data (like VIN, mileage, and security keys) and flash it onto the replacement module. We then ship the fully programmed, ready-to-install module back to you.
Do I need to send my old BCM? Is there a core charge?
Yes, you must send us your original BCM for the data cloning process. There is no core charge, and you can keep your original module after our service is complete if you wish, though it will be non-functional.
What is the turnaround time?
Once we receive your original module, our programming service typically takes 1-2 business days. We will then ship the replacement module back to you, and tracking information will be provided at that time.
Will this fix my specific problem?
This module corrects issues directly caused by a faulty BCM. If you are experiencing symptoms like erratic lights, window/lock failures, or communication-related trouble codes (U-codes), this is very likely the solution. Proper diagnosis is key to ensuring you are replacing the correct part.
Is this a guaranteed plug-and-play solution for my 2014-2015 Camaro BCM?
Yes, for the vast majority of vehicles, our cloning service makes this a true plug-and-play installation. In rare cases, as noted in our description, a simple relearn procedure for the airbag or brake pedal sensor may be required, which can be done with a professional scan tool.