The No-Dealership Fix for Your Camaro’s Electrical Headaches
As a technician with over two decades of experience, I’ve seen firsthand the frustration a failing Body Control Module (BCM) can cause. Your 2014-2015 Camaro might start acting possessed—windows won’t work, the radio acts up, security lights flash for no reason, or worse, it won’t start at all. The BCM is the central command center for your car’s body electronics, and when it fails, it creates a cascade of confusing problems. Many owners think they’re facing multiple expensive repairs, when the real culprit is this single module.
Forget the hassle and expense of towing your car to a dealership for a new BCM and costly programming. We offer a simple, reliable solution: a fully programmed 2014-2015 Camaro BCM that’s ready for installation right out of the box. Our service is designed to get you back on the road quickly and affordably.
How Our Simple Programming Service Works
The process is straightforward. After you place your order, we’ll contact you with instructions to ship your original BCM to our facility. Once we receive it, our expert technicians will extract the unique data—including your vehicle’s VIN, key information, and specific options—and transfer it directly to this replacement module. This cloning process ensures that the replacement BCM is a perfect electronic match for your Camaro. We then ship the ready-to-install module back to you, typically within 24-48 hours of receiving your original part. It’s a true plug-and-play solution.
From the Diagnostic Bay: The Case of the Haunted Camaro
A customer brought in a 2015 Camaro Convertible with a laundry list of bizarre symptoms. The interior lights would flicker, the power locks would cycle randomly while driving, and the car intermittently refused to start. He had already replaced the battery and checked the alternator. When I connected my scan tool, I found a series of communication error codes (U0140, U0155) pointing to a network failure. Instead of chasing ghosts in the wiring, my experience pointed straight to the BCM. We used this exact cloning service, and once the programmed module was installed, every single issue vanished. It saved the customer hundreds in diagnostic time and dealership programming fees.
Common Signs of a Failing BCM
If your vehicle is experiencing any of these issues, a faulty BCM is the likely cause. This programmed 2014-2015 Camaro BCM is the definitive solution.
- ✔ Erratic or non-functional power windows, door locks, and interior/exterior lights.
- ✔ The security system light stays on or flashes, preventing the engine from starting.
- ✔ The radio or infotainment system behaves unpredictably or doesn’t turn on.
- ✔ False warning lights appearing on the instrument cluster (e.g., check engine, ABS, airbag).
- ✔ Communication-related Diagnostic Trouble Codes (DTCs), especially U-codes like U0140.
- ✔ Complete no-start condition where the starter doesn’t even click.
Your Straightforward BCM Installation Guide
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before starting any electronic repair.
- ✔ Locate the BCM: On the 2014-2015 Camaro, the BCM is typically located behind the right-hand (passenger side) of the dashboard. Access may require removing the glove box or a lower dash panel.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the New Module: Mount your pre-programmed replacement BCM in the same location and securely reconnect all electrical connectors. You should hear a click as they lock into place.
Important Post-Installation Notes
In some cases, additional synchronization procedures may be necessary after installation. These are vehicle-specific and often depend on the initial state of failure.
- Airbag System Sync: If your airbag warning light is illuminated after installation, a professional scan tool is required to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control operation, a brake pedal position sensor relearn might be needed. This can also be performed with a compatible diagnostic tool.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a qualified technician if you are unsure about any part of the installation or post-install procedures.
Verified Compatibility for Your Vehicle
This module is a direct replacement for part number 13589637 and is also compatible with the following part numbers: 13580698, 13578458, 13589115, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, and 13594564. It fits a wide range of GM vehicles, including:
- ✔ 2014-2015 Chevrolet Camaro (Body Control, RH dash)
- ✔ 2014-2015 Buick LaCrosse (Body Control, LH kick panel)
- ✔ 2014-2015 Chevrolet Malibu (Body Control, LH kick panel)
- ✔ 2014-2015 Chevrolet Volt (Body Control, RH engine compartment)
- ✔ 2014-2016 Cadillac ELR (Body Control, RH cowl)
- ✔ 2014-2017 Buick Regal (Body Control, LH dash)
- ✔ 2014-2016 Cadillac SRX (Body Control, LH dash)
- ✔ 2014-2016 Chevrolet Spark EV (Body Control, left lower a-pillar)
- ✔ 2016 Chevrolet Malibu Limited (VIN 1)
- ✔ 2016 Buick LaCrosse (ID 13580698 or 13594564)
With our programming service for the 2014-2015 Camaro BCM, you get a reliable part, save money, and avoid the dealership. It’s the smart, efficient way to restore your car’s proper function.
Frequently Asked Questions
Frequently Asked Questions
Do I need to have my keys reprogrammed after installation?
No. Because we clone the data from your original BCM, all your existing key information is transferred over. Your current keys will work immediately.