Restore Full Electrical Function to Your Vehicle
Are you battling frustrating and unpredictable electrical problems in your 2014-2015 Chevrolet Camaro or other compatible GM vehicle? A failing Body Control Module (BCM) is often the culprit. The BCM acts as the central command center for your car’s body electronics, managing everything from power windows and door locks to interior lighting and the security system. When it starts to fail, it can create a cascade of issues that are difficult to diagnose and expensive to fix at a dealership.
From the Diagnostic Bay
We recently had a 2015 Camaro convertible in the shop with a classic case of BCM failure. The customer reported that the interior lights would flicker randomly, the radio would shut off intermittently, and occasionally the car wouldn’t recognize the key fob. After checking the battery and alternator, our diagnostics pointed directly to a communication breakdown with the BCM. Instead of a costly new module and days of programming at the dealer, we used our cloning service. By transferring the data from his original, failing module to a quality replacement, we had him back on the road the same day with all systems working perfectly. It’s a straightforward solution to a complex problem.
Is Your Body Control Module Failing?
A faulty BCM can manifest in numerous ways. If you’re experiencing any of the following, it’s a strong indicator that your BCM needs attention:
- ✔ Power windows, mirrors, or door locks operating erratically or not at all.
- ✔ Interior or exterior lights (headlights, taillights, dome lights) staying on or not turning on.
- ✔ The vehicle’s security system malfunctioning or preventing the car from starting.
- ✔ Dashboard warning lights appearing for seemingly unrelated systems (ABS, Airbag, Traction Control).
- ✔ Inconsistent operation of the radio, climate control, or windshield wipers.
- ✔ Key fob not being recognized by the vehicle.
The Simple, Plug-and-Play Solution
Forget about expensive dealership visits, towing fees, and complex programming procedures. Our professional cloning service makes this repair job simple and cost-effective. The process is designed for your convenience:
- Place Your Order: Complete your purchase, ensuring your contact information is accurate.
- We Contact You: Our team will reach out with simple instructions and a shipping address for you to send us your original BCM.
- We Transfer The Data: Once we receive your module, our technicians will perform a precise data transfer, copying all the essential vehicle-specific information (like VIN, mileage, and key data) to this replacement unit.
- We Ship It Back: We ship the ready-to-install BCM back to you, typically within one business day, and provide you with tracking information.
The result is a true plug-and-play module. Simply disconnect your old BCM, install this one, and you’re ready to go. All your vehicle’s original settings and key programming are retained, saving you hundreds of dollars and significant downtime.
Installation and Setup for Your 2014-2015 Camaro BCM
Physical installation is straightforward. The BCM is typically located in the right-hand side of the dash on the 2014-2015 Camaro. While our cloning service eliminates the need for initial programming, some vehicles may require a simple relearn procedure after installation for full system synchronization.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool must be used to perform the “Setup SDM Primary Key in BCM” procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be needed to ensure correct brake light and traction control operation.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Guaranteed Fitment
This BCM is a direct replacement for the following part numbers:
13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
It is compatible with a wide range of GM vehicles, including:
- 2014-2015 Buick LaCrosse
- 2016 Buick LaCrosse (ID 13580698 or 13594564)
- 2014-2017 Buick Regal
- 2014-2015 Chevrolet Camaro
- 2014-2015 Chevrolet Malibu
- 2016 Chevrolet Malibu (VIN 1, Limited)
- 2014-2016 Chevrolet Spark (EV)
- 2014-2015 Chevrolet Volt
- 2014-2016 Cadillac ELR
- 2014-2016 Cadillac SRX
Frequently Asked Questions
What exactly does the Body Control Module do?
The BCM is a computer that manages and controls many of your vehicle’s non-engine related electronic features, such as power windows, locks, lights, wipers, security system, and climate controls. It’s the brain for your car’s creature comforts and security.
How does the cloning service work?
You ship your original BCM to us. Our technicians use specialized equipment to read the unique data from your module—including the VIN, security information, and other settings—and write it directly onto the replacement BCM we provide. This makes the replacement unit an exact electronic match for your vehicle.
Is this truly a plug-and-play installation?
Yes, for over 99% of installations. Because we transfer all data from your original module, the replacement BCM will be immediately recognized by your vehicle, requiring no initial programming. In rare cases, a post-install relearn procedure, like for the airbag system, may be needed as outlined above.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is not functioning in the vehicle, we can still extract the necessary data. Please contact us before ordering if your module is severely damaged by water or fire, or if a technician has confirmed it has no communication.
Where is the BCM located on my 2014-2015 Camaro?
On the 2014-2015 Chevrolet Camaro, the Body Control Module is typically located behind the dashboard on the passenger’s side (RH dash).