Is Your Camaro Experiencing Bizarre Electrical Issues?
The Body Control Module (BCM) is the central command center for your vehicle’s body electronics. It manages everything from your power windows and door locks to the interior lights, security system, and climate controls. When the BCM starts to fail in a 2014-2015 Chevrolet Camaro, it can lead to a host of frustrating and seemingly unrelated problems. You might be dealing with flickering lights, a security system that won’t disarm, or windows that have a mind of their own. These aren’t just annoyances; they can impact your vehicle’s security and functionality.
Common Symptoms of a Failing BCM
- ✔ Erratic power windows, door locks, or mirrors that work intermittently.
- ✔ Interior or exterior lights (headlights, taillights, dome lights) staying on or not turning on at all.
- ✔ The vehicle’s security system malfunctioning, causing false alarms or preventing the car from starting.
- ✔ Warning messages on the dash, such as “Service Theft Deterrent System.”
- ✔ Intermittent no-start conditions where the engine cranks but won’t fire up.
- ✔ HVAC or climate control system behaving unpredictably.
- ✔ Key fob not being recognized or working inconsistently.
From the Diagnostic Bay
We had a 2015 Camaro convertible come into the shop with a classic BCM failure story. The owner complained that his battery would be dead every few mornings. He’d already replaced the battery and alternator, but the problem persisted. We performed a parasitic draw test and found a significant draw coming from the interior lighting circuit. Even with everything off, the BCM was keeping certain relays energized, slowly draining the battery overnight. Swapping in a new BCM wasn’t enough—it had to be programmed. Our cloning service is the perfect solution for this, transferring the original data to the replacement unit and solving the problem without a trip to the dealer.
The Simple, No-Dealership Solution for Your 2014-2015 Camaro BCM
Replacing a BCM typically requires expensive diagnostic tools and programming at a dealership to sync the new module with your car’s VIN and security information. Our unique programming service completely bypasses this hassle. We take all the critical data from your original, failing BCM and clone it directly onto this replacement unit. The result is a true plug-and-play module that is ready for installation the moment you receive it.
How It Works:
- Place your order for this BCM programming service.
- We will contact you with simple instructions for shipping your original BCM to our facility.
- Once we receive your module, our technicians will transfer all necessary data to the replacement unit.
- We ship both your original module and the ready-to-install replacement back to you.
Installation and Post-Install Notes
Installation is straightforward: disconnect the battery, locate your BCM (typically behind the right-hand side of the dashboard in a Camaro), and swap the modules. While our programming makes this a plug-and-play process, some vehicle systems may require a simple relearn procedure after the new module is installed.
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM. This is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper function of the brake lights and traction control system.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Vehicle and Part Number Compatibility
This BCM is a direct replacement for a wide range of GM vehicles and part numbers. Please verify that your vehicle and part number are listed below.
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
Fitment Includes:
- 2014-2015 CAMARO (Body Control, RH dash)
- 2014-2016 ELR (Body Control, RH cowl)
- 2014-2016 LACROSSE (Body Control, LH kick panel)
- 2014-2016 MALIBU (Body Control, LH kick panel)
- 2014-2017 REGAL (Body Control, LH dash)
- 2014-2016 SRX (Body Control, LH dash)
- 2014-2015 VOLT (Body Control, RH engine compartment)
- 2014-2016 SPARK (EV model, Body Control, left lower a-pillar)
Frequently Asked Questions
What is a Body Control Module (BCM)?
The BCM is a computer in your vehicle that controls and monitors various electronic accessories, such as power windows, locks, lights, the security system, and climate controls. It acts as a central hub for these functions.
How does this cloning and programming service work?
After you purchase, you will ship your original BCM to us. We use specialized equipment to extract the unique data from your module—including VIN, security keys, and option settings—and flash it onto the replacement BCM. We then ship the plug-and-play replacement back to you.
Do I need to go to the dealer after installing this part?
No. Because we clone your original data, this module will be recognized by your vehicle as the original part, eliminating the need for costly dealership programming. In rare cases, a simple relearn procedure for the airbag or brake pedal sensor may be needed, which can be done by most independent shops.
Is this a guaranteed fix for my car’s electrical problems?
If your vehicle’s issues match the common symptoms of a failing BCM and a proper diagnosis has been performed, this part is the definitive solution. It resolves problems originating from a faulty BCM computer.
Where is the BCM located on a 2014-2015 Camaro?
On the 2014-2015 Chevrolet Camaro, the Body Control Module is typically located on the right-hand (passenger) side of the dashboard, often accessible by removing the glove box or lower dash panels.