Restore Full Electrical Function to Your Vehicle
Are you experiencing a cascade of bizarre electrical issues in your Chevrolet Camaro, Buick LaCrosse, or Cadillac SRX? Problems like malfunctioning power windows, erratic interior lights, a persistent battery drain, or dashboard warning lights that won’t go away are often symptoms of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can create frustrating and difficult-to-diagnose problems. This isn’t just a replacement part; it’s a comprehensive, plug-and-play solution designed to get your car back to perfect working order without costly dealership programming.
From the Diagnostic Bay
We recently worked on a 2015 Camaro with the strangest set of symptoms. The owner complained that the radio would randomly change stations, the driver’s side window worked intermittently, and the battery was dead nearly every morning. He had already replaced the battery and alternator to no avail. After hours of tracing circuits and checking grounds, all diagnostics pointed to an internal failure in the BCM. It was sending phantom signals across the vehicle’s network. By providing a replacement module cloned from his original, we solved every single electrical gremlin in one go. It’s a perfect example of how a single failing module can mimic a dozen different problems.
Common Symptoms of a Failing BCM
If your vehicle is exhibiting any of the following signs, a faulty BCM could be the culprit. Don’t continue to chase individual symptoms; address the root cause.
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ Interior dome lights or exterior lamps staying on or failing to illuminate.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ An unexplained parasitic battery drain that leaves you with a dead battery.
- ✔ Horn honking unexpectedly or not working when needed.
- ✔ Windshield wipers activating on their own or not responding to the switch.
- ✔ False warnings appearing on the instrument cluster (e.g., “Service Airbag System”).
The Simple, No-Hassle Solution: Our Cloning Service
Replacing a BCM is typically not a simple swap. A new or used module from another vehicle must be programmed by a dealership with expensive, specialized tools to recognize your car’s unique Vehicle Identification Number (VIN), key codes, and specific options. Our professional cloning service completely bypasses this step. We transfer all the critical data from your original, failing BCM directly onto this replacement unit. This includes:
- Vehicle Identification Number (VIN)
- Immobilizer & Security Information
- Key Fob Programming
- Mileage Data
- Vehicle-Specific Options & Settings
The result is a true plug-and-play module. Once you receive it, you simply install it, and your vehicle will accept it as its original unit, restoring all functions immediately.
How the Programming Service Works
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ Receive Instructions: We will contact you via email or phone with detailed instructions on how to package and where to ship your original BCM.
- ✔ Ship Your Module: Send us your original BCM. We recommend using a tracked shipping service.
- ✔ We Clone Your Data: Upon receipt, our expert technicians will perform a full data transfer to the replacement module, typically within 1-2 business days.
- ✔ Receive Your Modules: We ship both your original module and the ready-to-install replacement back to you with tracking information.
Guaranteed Fitment for Your 2014-2015 Camaro BCM and More
This Body Control Module is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify that your original module’s part number is on this list:
Compatible Part Numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, 13594564
This part will fit these makes and models with these options:
- BUICK LACROSSE: 2014-2015, 2016 (ID 13580698 or 13594564)
- BUICK REGAL: 2014-2017
- CADILLAC ELR: 2014-2016
- CADILLAC SRX: 2014-2016
- CHEVROLET CAMARO: 2014 (Convertible), 2015
- CHEVROLET MALIBU: 2014-2015, 2016 (Limited)
- CHEVROLET SPARK: 2014-2016 (EV Model)
- CHEVROLET VOLT: 2014-2015
Post-Installation Procedures
While our programming makes this a plug-and-play installation, some vehicle systems may require a simple relearn or sync procedure after the BCM is reconnected. These can often be performed with a high-end bidirectional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be required to ensure proper brake light operation and to satisfy the traction control system.
Disclaimer: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
Why is this cloning service better than buying a used BCM?
A used BCM from another vehicle will not work in your car without being reprogrammed by a dealer, which is a significant extra cost. Our service provides a fully programmed module that is ready for installation right out of the box, saving you time and money.
Do I need to program my keys again?
No. Because we transfer all the security and key data from your original module, your existing keys will work perfectly without any additional programming.
What if my original BCM is completely dead or water damaged?
In most cases, even with significant damage or communication failure, our technicians can still extract the necessary data. If you have concerns about the condition of your module, please contact us before ordering.
How long does the entire process take?
The programming service itself is completed within 1-2 business days of us receiving your module. The total turnaround time will depend on the shipping times to and from our facility.
Is this part difficult to install myself?
The physical installation is generally straightforward, involving the removal of a few trim panels and disconnecting electrical connectors. The primary difficulty with BCM replacement is the software programming, which our service completely handles for you.