Restore Full Electronic Function to Your 2013 Chevrolet Volt
Are you experiencing a cascade of frustrating electrical issues in your 2013 Chevy Volt? From flickering lights and malfunctioning power windows to strange warning messages on your dash, a failing Body Control Module (BCM) is often the root cause. The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can make your car feel unreliable and unpredictable. This listing offers a straightforward, effective solution: a replacement BCM programmed specifically for your vehicle, eliminating the need for expensive dealership intervention.
From the Diagnostic Bay
We had a 2013 Volt come in that was driving its owner crazy. The radio would randomly turn off, the dome light would flicker while driving, and sometimes the car wouldn’t recognize the key fob. We scanned it and found a dozen communication codes pointing everywhere and nowhere. Instead of chasing electrical ghosts, we went straight to the central hub: the BCM. After installing a cloned module just like this one, every single one of the bizarre electrical gremlins vanished. It’s a powerful reminder that when multiple, unrelated systems act up, the BCM is often the primary suspect.
Common Symptoms of a Failing BCM
- ✔ Erratic power windows, door locks, or mirrors that work intermittently or not at all.
- ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
- ✔ Instrument cluster warnings, such as the security light, flashing unexpectedly.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ HVAC (climate control) system malfunctions or unresponsive controls.
- ✔ Key fob not being detected or intermittent remote function failure.
- ✔ A flood of communication-related Diagnostic Trouble Codes (U-codes) when scanned.
Your Plug-and-Play 2013 Volt Body Control Module Solution
Dealerships will often quote you a high price for a new BCM, followed by several hours of labor for installation and programming. Our service bypasses this expensive and time-consuming process. We provide a simple, mail-in programming service. Here’s how it works:
- Place Your Order: Purchase this service and we will contact you with shipping instructions.
- Ship Your Original BCM: Carefully remove your original BCM and send it to us. This module contains all the unique data for your vehicle, including the VIN, security information, and specific options.
- We Clone The Data: Our technicians will professionally extract the critical data from your original module and transfer it to a fully tested, replacement unit. This makes the new module a perfect digital twin of your old one.
- Receive & Install: We ship your original module and the ready-to-install replacement back to you. The installation is plug-and-play, with no further programming required.
Post-Installation Procedures
While our programming makes the module plug-and-play, certain vehicle systems may require a recalibration or ‘handshake’ procedure after the BCM is reinstalled. This is a standard part of many automotive repairs. You may need a professional diagnostic tool to perform the following:
- Airbag System Sync: If the airbag warning light is on after installation, the ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the BCM with the airbag module. This is a critical safety step.
- Brake Pedal Position Relearn: A recalibration of the brake pedal position sensor may be required to ensure proper brake light function and to allow the traction control and ABS systems to work correctly.
Please note: Specific procedures can vary. Always consult a factory service manual or a qualified technician for guidance.
Fitment and Part Numbers
This service and module are compatible with part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. This part will fit these makes and models with these options:
- EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
- VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
- CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
- CRUZE 14-15 Body Control (BCM); (LH kick panel)
- CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
- ENCORE 13-14 Body Control (BCM); (LH side of dash)
- MALIBU 13 Body Control (BCM); (LH kick panel)
- REGAL 13 Body Control (BCM); (LH dash)
- SRX 13 Body Control (BCM); (LH dash)
- SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
- ORLANDO 13-14 Body Control (BCM); (below center console)
- VERANO 13-17 Body Control (BCM); (below center of dash)
- TRAX 13-14 Body Control (BCM); (LH side of dash)
- TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer that manages and controls many of your vehicle’s non-engine-related functions, like power windows, locks, lights, the security system, and climate controls.
Why do I need to send you my original module?
Your original module contains the specific software, VIN, and security information unique to your vehicle. By cloning this data onto the replacement unit, we make it a true plug-and-play part, saving you from costly and complex dealership programming.
Is this BCM difficult to install?
The physical installation is typically straightforward, involving disconnecting the battery and swapping the module. However, some post-installation electronic procedures, like an airbag system sync or brake pedal position relearn, may be required using a professional scan tool.
What happens if I don’t perform the post-installation procedures?
If the airbag light is on, it indicates the BCM and the airbag module (SDM) are not communicating correctly, which is a safety concern that must be addressed. If the brake pedal position isn’t relearned, you might have issues with brake light operation or traction control.
Will this fix my specific problem?
This module will correct issues directly caused by a faulty 2013 Volt Body Control Module. If you’re experiencing symptoms from our list, there’s a very high probability this is the solution. We always recommend a proper diagnosis by a qualified technician to confirm the BCM is the root cause.
How long does the programming service take?
Our service is fast. Once we receive your original module, the cloning and testing process typically takes 1-2 business days. We then ship both your original and the newly programmed replacement module back to you.