Is Your Chevrolet Volt Experiencing Bizarre Electrical Problems?
The Body Control Module (BCM) is the central command center for your vehicle’s electronic accessories. It manages everything from your power windows and door locks to the interior lights, security system, and even communicates with other critical modules. When the BCM in your 2013 Chevrolet Volt or other compatible GM vehicle begins to fail, it can cause a cascade of confusing and frustrating electrical issues that can be difficult to diagnose. You might experience lights that won’t turn off, a security system that acts up, or power accessories that work intermittently or not at all. Replacing it often means an expensive trip to the dealership for programming. We offer a simpler, more affordable solution.
The Plug-and-Play Solution: A Programmed BCM
This listing is for a replacement BCM that is professionally programmed with the data from your vehicle’s original module. This cloning service ensures that the replacement BCM is a perfect match for your car’s specific configuration, VIN, and options. The result is a true plug-and-play module that eliminates the need for costly and time-consuming dealership programming. Simply install the module, and you’re ready to go.
Common Symptoms of a Failing 2013 Volt Body Control Module
A failing BCM can manifest in numerous ways. If you’re noticing any of the following issues, your Body Control Module may be the culprit:
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The vehicle’s security system or keyless entry malfunctioning.
- ✔ Inaccurate readings on the instrument cluster gauges.
- ✔ The radio or infotainment system behaving erratically.
- ✔ Warning lights appearing on the dash, such as the airbag or service vehicle light.
- ✔ The vehicle failing to start due to security system communication errors.
Our Simple Programming Service Process
We’ve streamlined the process to get you back on the road quickly:
- Place Your Order: Purchase this BCM programming service. Please ensure your contact information is up-to-date.
- We Contact You: After your purchase, our team will reach out to you with clear, step-by-step instructions on how to remove and ship your original BCM to our facility.
- Ship Your Original Module: Carefully package and send us your original BCM.
- We Program Your Replacement: Once we receive your module, our technicians will transfer all the necessary data to the replacement BCM.
- Receive Your Ready-to-Install BCM: We ship the programmed replacement BCM back to you. You’ll receive tracking information as soon as it’s on its way. Installation is as simple as plugging it in.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a recalibration after the new BCM is installed. These are simple procedures for any qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is required. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Vehicle Fitment and Part Number Compatibility
This BCM is a direct replacement for the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325. It is confirmed to fit the following vehicles:
- Chevrolet Cruze: 2013-2015, 2016 (Limited)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (Gasoline Model)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- Cadillac SRX: 2013
- GMC Terrain: 2013-2017
Frequently Asked Questions
What exactly is this service?
This is a programming service. You send us your original, faulty BCM. We then transfer its programming (including VIN, mileage, and key data) to a fully functional replacement BCM and ship the replacement unit back to you. This makes the part plug-and-play.
Why do I need to send you my original BCM?
Your original BCM contains unique data specific to your vehicle’s factory-installed options and security system. By cloning this data, we ensure the replacement module works perfectly with your car without requiring any additional programming from a dealer.
Is this a guaranteed plug-and-play solution?
Yes, for 99% of installations. The BCM will be ready to install and function immediately. In rare cases, as noted above, a simple relearn procedure for the airbag or brake pedal sensor may be needed, which can be done by a shop with a professional scan tool.
How long does the entire process take?
We typically program and ship the replacement module within 1-2 business days of receiving your original BCM. The total time will depend on shipping times to and from our facility.
Do I need to return my old part after I receive the new one?
No, there is no core charge or requirement to return your original module after the service is complete. You can keep it.