2013, Volt, Body Control Module, 13589325, Programmed To Your VIN, BCM,

Get a Simple Plug-and-Play BCM Solution!

Tired of strange electrical problems? This Body Control Module is programmed using your vehicle’s original data, eliminating the need for expensive dealership visits. It’s a direct-fit, reliable fix for a wide range of GM vehicles. Order today to restore your car’s functionality!

$249.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-07784-82 Categories: , ,
Guaranteed Safe Checkout

Restore Full Electrical Function to Your Vehicle

Are you experiencing a cascade of frustrating electrical problems in your Chevrolet, Buick, or GMC? Issues like malfunctioning power windows, flickering interior lights, a faulty security system, or even a no-start condition often point to a single culprit: a failing Body Control Module (BCM). The BCM acts as the central hub for your vehicle’s body electronics, and when it goes bad, it can create chaos. This listing offers a straightforward, effective solution: a replacement BCM, part number 13589325, that is professionally programmed using the data from your original unit.

Diagnosing a Faulty 2013 Volt Body Control Module

A failing BCM can manifest in numerous ways, often seeming unrelated at first. Proper diagnosis is key to avoiding unnecessary repairs. If your vehicle is exhibiting several of the following symptoms, your BCM is the likely cause.

  • ✔ Intermittent or non-working power windows, door locks, and mirrors.
  • ✔ Interior or exterior lights that stay on, flicker, or don’t work at all.
  • ✔ The security system acting erratically, causing alarm issues or preventing the engine from starting.
  • ✔ Inaccurate readings on the instrument cluster gauges.
  • ✔ Communication error codes (U-codes) when scanned with a diagnostic tool.
  • ✔ Problems with the keyless entry or remote start systems.
  • ✔ HVAC (heating and air conditioning) controls not responding correctly.

Expert Pro Tip: Before condemning your BCM, always check the basics first. Inspect the battery terminals for a clean, tight connection and verify the main BCM fuses and grounds are intact. A simple voltage drop or poor ground can mimic the symptoms of a failed module.

The Simple, Plug-and-Play Programming Solution

Dealerships often require you to purchase a new, expensive module and then charge significant labor fees for programming it to your vehicle’s specific VIN and options. Our service bypasses this costly and time-consuming process. By cloning the information from your original BCM directly onto this replacement unit, we provide a module that is ready for installation right out of the box.

Here’s how our service works:

  1. Place Your Order: Complete your purchase through our secure checkout.
  2. We Contact You: We will reach out with clear, simple instructions for shipping your original BCM to our facility.
  3. We Program Your Part: Once we receive your module, our technicians will perform a full data transfer to the replacement unit. This process captures all the vital information, including VIN, mileage, and key programming.
  4. We Ship It Back: We promptly ship the newly programmed module back to you. You’ll receive tracking information so you know exactly when it will arrive.

This process ensures that the replacement 2013 Volt Body Control Module integrates seamlessly with all other computer systems in your vehicle, just like the original part did.

Post-Installation Procedures

While this module is designed to be plug-and-play, some GM vehicles may require one or two simple relearn procedures after installation to ensure all systems are perfectly synchronized. These are standard procedures that can often be performed with a high-quality bidirectional scan tool.

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
  • Brake Pedal Position Relearn: On certain models, a brake pedal position sensor recalibration might be necessary. This ensures the brake lights and traction control system function as intended.

Always consult a factory service manual or a qualified technician for vehicle-specific instructions.

Broad Compatibility Across GM Models

This BCM is a direct replacement for several part numbers, including 13584695, 13586273, 13580697, 13588447, 13589197, and 13589324. It is compatible with a wide range of vehicles beyond the 2013 Volt, such as the Chevy Equinox, Cruze, Malibu, Spark, Trax, Orlando, Buick Encore, Verano, Regal, Cadillac SRX, and GMC Terrain from various model years. Please verify your part number and check the fitment list to ensure compatibility.

Frequently Asked Questions

How does this programming service work?

After you place your order, we will provide instructions for you to ship your original BCM to us. We then extract the vehicle-specific data and transfer it to the replacement module. We ship the programmed module back to you, ready for installation.

Is this BCM truly plug-and-play?

Yes, in most cases it is. Because we clone your original data, no initial programming is needed. However, as noted, some vehicles may require a simple relearn procedure for the airbag or brake pedal position sensor after installation.

How long does the entire process take?

Our programming service is typically completed within 1-2 business days after we receive your original module. The total time will depend on shipping times to and from our facility.

Will this fix my specific problem?

This part will resolve any issues directly caused by a faulty BCM. It’s crucial that your vehicle has been properly diagnosed to confirm the BCM is the source of the problem before ordering.

What if my original BCM is completely dead or not communicating?

In many cases, we can still recover data from non-communicating modules. Please contact us before ordering if your module is severely damaged by water or fire, as data recovery may not be possible in those instances.

Do I need to send my keys?

No, you do not need to send your keys. All the necessary immobilizer and key data is stored within the BCM itself, and this information is transferred during our cloning process.

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Year

2013

Make

Model

VOLT

Brand

GM

MPN

13589325

Manufacturer Part Number

Manufacturer Warranty

1 Year

Scroll to Top