Restore Full Functionality to Your 2013 Chevy Volt
Are you dealing with baffling electrical problems in your 2013 Chevy Volt? Flickering lights, unresponsive power windows and locks, or random warning indicators on your dash are classic signs of a failing Body Control Module (BCM). As the central computer for your vehicle’s comfort and security features, a faulty BCM can make driving a frustrating experience. This isn’t just an inconvenience; it can affect systems tied to your vehicle’s safety and security. Our plug-and-play solution, a precisely programmed 2013 Volt Body Control Module, is designed to resolve these issues efficiently and affordably.
We offer a straightforward cloning service that eliminates the need for expensive dealership visits and complex programming tools. Simply send us your original BCM, and our expert technicians will transfer all the critical, vehicle-specific data—including VIN, mileage, and key information—to this replacement unit. We then ship both your original module and the ready-to-install replacement back to you. This process ensures seamless integration with your vehicle’s existing electronic systems.
Common Signs of a Failing BCM
- ✔ Intermittent or non-functional headlights, taillights, or interior lighting.
- ✔ Power windows, door locks, or remote keyless entry not working correctly.
- ✔ False warning lights appearing on the instrument cluster (e.g., ABS, Airbag, Traction Control).
- ✔ Communication error codes, such as U0140 (Lost Communication With Body Control Module).
- ✔ Vehicle security system acting erratically or preventing the car from starting.
- ✔ Wipers or horn activating unexpectedly or not at all.
A Technician’s Notebook
I remember a 2013 Volt that came into the shop with a laundry list of bizarre, intermittent complaints. The owner was frustrated because the power locks would only work sometimes, the radio display would flicker, and occasionally the turn signals would stop responding. No single fuse or relay was the culprit. After connecting my scan tool, I found multiple ‘Lost Communication’ codes pointing to the BCM. Instead of ordering a new, blank module from the dealer—which would have required hours of programming and syncing—we used a cloned BCM. The customer sent us their original module, we performed the data transfer, and sent it back. The installation took less than 30 minutes, and every single electrical gremlin was gone. It’s a prime example of how this service saves both time and money, getting the vehicle fixed right the first time.
Your Straightforward Installation Guide
- ✔ Safety First: Disconnect the negative terminal from your vehicle’s 12V battery and secure it away from the post to prevent accidental reconnection.
- ✔ Locate the Module: On the 2013 Chevy Volt, the Body Control Module is typically located in the right-hand (passenger side) of the engine compartment. Consult your service manual to confirm the exact location.
- ✔ Disconnect and Remove: Carefully unplug all electrical connectors from the original BCM. Note their orientation. Then, unbolt the module from its mounting bracket.
- ✔ Install the Replacement: Mount the replacement BCM in the same position and securely reconnect all electrical connectors to their correct ports.
- ✔ Reconnect Power: Reattach the negative battery terminal.
- ✔ Verify Operation: Start the vehicle and test all body functions—lights, locks, windows, wipers, etc.—to ensure everything is working as expected.
Important Post-Installation Steps
Our cloning service makes this a plug-and-play repair for most functions. However, due to the complex nature of modern vehicle systems, a couple of additional steps may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be necessary to ensure correct brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Compatibility
This module is a direct fit for units with part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, or 13589325 and is compatible with the following vehicles:
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- Cadillac SRX: 2013
- Chevrolet Cruze: 2013-2016 (including Limited models)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (gasoline models)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013 (with ID 13580697 or 13586273)
- GMC Terrain: 2013-2017
Frequently Asked Questions
What exactly is a BCM cloning service?
Our cloning service is a process where we transfer the complete software and vehicle-specific configuration data (like VIN, mileage, and key codes) from your original, failing BCM to this fully functional replacement unit. This makes the replacement module plug-and-play, avoiding the need for dealership programming.
Is this better than buying a used BCM from a junkyard?
Absolutely. A used BCM from another vehicle is locked to that car’s VIN and options. It will not work correctly in your car without being completely reprogrammed by a dealer, which is often not possible. Our cloning service ensures the replacement BCM is an exact digital copy of your original, guaranteeing compatibility.
Do I need to program this 2013 Volt Body Control Module?
No. The module arrives pre-programmed with your vehicle’s data and is ready for installation right out of the box. The only potential follow-up steps are minor sync procedures like for the airbag system, if the warning light appears.
What happens to my original module?
We always return your original module along with the programmed replacement. We do not keep customer cores. You can keep it for your records or dispose of it as you see fit.
Will this fix my specific electrical problem?
If your vehicle’s issues match the common symptoms of BCM failure and a professional has diagnosed the BCM as the faulty component, this part is the correct solution. It’s designed to resolve issues directly controlled by the Body Control Module.
What if my airbag light is on after I install it?
This can happen occasionally as the BCM and Supplemental Restraint System (SRS) module need to re-establish their security handshake. A professional technician with a capable scan tool will need to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the modules and clear the light.