Is Your 2013 Minivan Running Rough?
There’s nothing more frustrating than a vehicle you can’t rely on. If your 2013 Chrysler Town & Country or Dodge Caravan is suddenly stalling, refusing to start, or displaying a persistent Check Engine Light, the root cause might be its most critical component: the Engine Control Module (ECM). This computer is the brain of your vehicle’s 3.6L engine, managing everything from fuel injection and ignition timing to transmission shifting and emissions. When it fails, it can cause a wide range of confusing and debilitating symptoms, leaving you stranded and facing a costly repair bill from the dealership.
Don’t let a faulty computer dictate your family’s mobility. This is a direct-fit, professionally prepared Engine Control Module, specifically programmed to solve these issues and restore your vehicle’s original performance and reliability. It arrives at your door completely flashed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage, eliminating the need for expensive dealership programming or specialized tools. It is a true plug-and-play solution.
From the Diagnostic Bay
We had a 2013 Town & Country towed in that was a classic no-start case. The owner had already replaced the battery and checked the starter, but it would just crank and crank. When we connected our diagnostic scanner, we got a “No Communication with ECM” error. That’s a huge red flag. After verifying the ECM was receiving power and ground, we knew the module itself had failed internally. Instead of a complicated trip to the dealer, we installed one of our pre-programmed units. After connecting the battery and turning the key, the engine fired up on the first try and idled perfectly. The customer was back on the road in under an hour, saving hundreds on dealership labor and programming fees.
Common Symptoms of a Failing 2013 Town Country ECM
- ✔ Check Engine Light: The check engine light is illuminated with codes that point to internal module failure (such as P0600, P0601, P0606) or communication errors.
- ✔ No-Start or Hard Starting: The engine cranks but refuses to start, or takes an unusually long time to fire up, either hot or cold.
- ✔ Engine Stalling: Your minivan may stall unexpectedly while driving or when coming to a stop.
- ✔ Poor Engine Performance: Noticeable loss of power, hesitation during acceleration, and a significant drop in fuel economy.
- ✔ Erratic Transmission Behavior: The ECM works with the transmission controller, so a failing unit can cause harsh shifting, getting stuck in gear, or incorrect shift points.
- ✔ Intermittent Issues: Problems may appear and disappear, often getting worse as the vehicle warms up.
The Plug-and-Play Advantage
The primary hurdle in replacing a modern vehicle’s computer is the complex programming required to sync it with the rest of the car’s systems, including the anti-theft immobilizer. Our solution completely bypasses this obstacle. We handle all the intricate programming for you before the part is even shipped. Using the VIN you provide at checkout, we load the correct factory software and security information onto the module. This ensures that when you receive it, the installation is as simple as unbolting the old unit and plugging in the new one. No trips to the mechanic, no towing fees, and no surprise programming charges.
Compatibility
This module is a direct replacement for a range of part numbers. Please verify that your original part number is on this list to ensure perfect compatibility:
Compatible Part Numbers: 05150724AC, 68164371AA, 68164371AB, 68164371AC, 68164371AD, 68164371AE, 68164371AF, 68164370AA, 68164370AB, 68164370AC, 68164370AD, 68164370AE, 68164370AF, 68164369AA, 68164369AB, 68164369AC, 68164369AD, 68164369AE, 68164369AF
This part fits the following vehicles:
- 2013 Dodge Grand Caravan (with 3.6L engine)
- 2013 Chrysler Town & Country (with 3.6L engine)
Frequently Asked Questions
Do I need to get this computer programmed by a dealer?
Absolutely not. This unit comes 100% pre-programmed for your specific vehicle using the VIN you provide. It is a true plug-and-play installation, saving you time and money.
What information do you need from me?
During checkout, we will require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures we load the correct software and settings for your minivan.
Where is the ECM located on my 2013 Town & Country?
On the 2013 Town & Country and Grand Caravan, the ECM is typically located in the engine bay, mounted to the driver’s side strut tower, near the battery and fuse box. It will have several large electrical connectors attached to it.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue and the associated codes. However, if there are other mechanical or electrical problems with the vehicle, this will not fix those separate issues.
Is any special procedure needed after installation?
The installation is straightforward. After installing the new ECM and reconnecting the battery, simply turn the key to the ‘ON’ position for a few seconds before starting the engine. This allows all the vehicle’s modules to recognize the new computer. No other relearn procedures are typically required.