Restore Your Vehicle’s Electronics with a Hassle-Free Solution
Are you dealing with bizarre electrical issues in your Buick Regal or another compatible GM vehicle? Flickering lights, malfunctioning power windows and locks, or strange warning messages on your dash are classic signs of a failing Body Control Module (BCM). The BCM is the central hub for your car’s body electronics, and when it fails, it can cause a cascade of frustrating problems. Dealerships often quote expensive repairs that involve costly programming and vehicle downtime. Our 2013 Regal Body Control Module cloning service is the smart, cost-effective alternative.
We make the process simple. After your purchase, you’ll ship your original BCM to us. Our expert technicians will then transfer all the critical vehicle-specific data—including VIN, mileage, and security information—to a fully tested replacement unit. This ‘cloning’ process ensures the replacement module is a perfect digital match for your car. We then ship both your original module and the ready-to-install replacement back to you. The result is a true plug-and-play solution that eliminates the need for a trip to the dealership for expensive programming.
From the Diagnostic Bay: The Case of the Confused Cruze
A few months back, a 2014 Chevy Cruze came into my shop with a laundry list of complaints from the owner. The radio would turn on and off by itself, the driver’s side window wouldn’t roll down, and the anti-theft light would flash intermittently, sometimes preventing the car from starting. The owner had already replaced the battery and checked fuses with no luck. A quick scan revealed a slew of U-codes (communication errors), all pointing to a network breakdown. The culprit? An internally failing BCM. Instead of a new module and a complex programming session, we recommended this cloning service. The customer removed their module, sent it in, and had a plug-and-play solution back in a few days. The car was back to normal, and the customer saved hundreds compared to the dealer quote. This is a common scenario I’ve seen dozens of times with these GM platforms.
Is Your Vehicle Showing These BCM Failure Symptoms?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this module is likely the solution you need:
- ✔ Intermittent or non-functional power windows, door locks, or interior lights.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Instrument cluster gauges behaving erratically or going dark.
- ✔ Security or anti-theft system light flashing, causing no-start conditions.
- ✔ Communication error codes (U-codes) stored, such as U0140, U0155, or U0100.
- ✔ Wipers or turn signals activating on their own or not responding.
Your Straightforward BCM Installation Guide
Installing your cloned 2013 Regal Body Control Module is a direct process that most DIYers can handle. Follow these general steps for a smooth installation.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
- Locate the BCM: On the 2013 Regal, the BCM is typically located behind the dashboard on the driver’s side (LH dash). For other models, its location can vary (e.g., LH kick panel, below the center console). Consult your service manual for the exact position.
- Remove the Old Module: Carefully disconnect all electrical connectors from the original BCM. Note their orientation. Then, unbolt or unclip the module from its mounting bracket.
- Install the Cloned Module: Mount the replacement BCM in the same position as the original. Reconnect all electrical connectors securely, ensuring they click into place.
- Reconnect the Battery: Reattach the negative battery terminal.
- Test Functionality: Start the vehicle and test all body electronics: windows, locks, lights, wipers, and radio to confirm the repair.
Important Post-Installation Notes
In some cases, additional steps may be required after installation:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool to synchronize the systems.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor relearn might be necessary for proper brake light and traction control operation.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a qualified technician for procedures specific to your vehicle.
Verified Fitment for Your GM Vehicle
This BCM cloning service is compatible with units matching part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, or 13589325. It fits a wide range of vehicles, including:
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- Cadillac SRX: 2013
- Chevrolet Cruze: 2013-2015, 2016 (Limited)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (Gasoline)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013
- GMC Terrain: 2013-2017
Frequently Asked Questions
How does the cloning service work?
After you place your order, we will provide you with shipping instructions. You send us your original BCM. We then copy its unique programming and security data onto a replacement module. We ship both your original and the plug-and-play replacement back to you, ready for installation without any further programming.
Do I need to get this programmed by a dealer?
No. The entire purpose of our cloning service is to bypass the need for dealer programming. The replacement module we send you is pre-programmed with your car’s exact data, making it a true plug-and-play installation.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is failing, we can still extract the necessary data. If your module has severe damage (e.g., from fire or water), please contact us before ordering to discuss options. We can often retrieve data even from non-communicating modules.
Will I get my original module back?
Yes. We always return your original BCM along with the fully programmed replacement unit. We do not keep your original part.
Is this a guaranteed fix for my car’s problems?
This service corrects issues directly caused by a faulty BCM. While it resolves the vast majority of related electrical problems, it’s crucial to ensure your vehicle has been properly diagnosed. This module will not fix issues caused by bad wiring, faulty sensors, or other components.