Restore Your Vehicle’s Vital Functions with a Pre-Programmed Body Control Module

As a seasoned automotive expert, I’ve seen firsthand the frustration a failing Body Control Module (BCM) can cause. It’s not just an inconvenience; it can bring your vehicle to a grinding halt, affecting everything from your power windows to your engine’s starting sequence. That’s why we offer a precise, pre-programmed solution for your vehicle, ensuring you get back on the road with minimal fuss.

This isn’t just a replacement part; it’s a meticulously programmed BCM, specifically prepared to integrate seamlessly with your vehicle. We take your original BCM and meticulously clone its data onto the replacement unit. This critical step eliminates the need for expensive dealership programming or specialized diagnostic tools, saving you significant time and money. When you’re dealing with a complex component like the 2013 Regal BCM, having it arrive ready to install is a game-changer.

Is Your Vehicle Showing These BCM Failure Symptoms?

A failing BCM can manifest in a multitude of ways, often mimicking issues with other systems. From my years in the shop, I’ve diagnosed countless vehicles exhibiting these tell-tale signs. If you’re experiencing any of the following, a faulty BCM could be the culprit:

• ✔ Intermittent or complete failure of power windows, door locks, or power mirrors.
• ✔ Headlights or taillights staying on, flickering, or not working at all.
• ✔ Dashboard warning lights illuminating without apparent cause, such as the airbag light (DTC B0001, B0005) or ABS light.
• ✔ Issues with the vehicle’s security system, including unexpected alarms or difficulty starting (DTC B2960).
• ✔ Problems with the climate control system, including fan speed or temperature regulation.
• ✔ Erratic wiper operation or complete failure.
• ✔ Communication errors with other modules, often indicated by codes like U0140 (Lost Communication With Body Control Module) or U0100 (Lost Communication With ECM/PCM A).
• ✔ Battery drain issues, where the BCM fails to enter sleep mode.
• ✔ Inconsistent horn operation or interior lighting problems.
• ✔ Diagnostic Trouble Codes (DTCs) related to internal control module performance, such as P0606.

Seamless BCM Replacement: Your Step-by-Step Guide

While we handle the complex programming, installing the BCM itself is a process many DIY enthusiasts can tackle. For professional mechanics, this pre-programmed unit means a faster, more efficient repair. Here’s a general overview of the process:

1. Safety First: Disconnect the negative battery terminal. This is crucial to prevent electrical shorts and ensure your safety.
2. Locate the Original BCM: Refer to your vehicle’s service manual for the exact location. For many GM models, including the 2013 Regal BCM, it’s often located on the LH side of the dash or kick panel, though locations vary by model (e.g., Volt BCM can be in the RH engine compartment).
3. Carefully Disconnect Connectors: Unplug all electrical connectors from the existing BCM. Take photos or label them if necessary to ensure correct reinstallation.
4. Remove Mounting Fasteners: Remove any bolts, screws, or clips securing the old BCM in place.
5. Ship Your Original BCM to Us: After your purchase, we will contact you to arrange shipping of your faulty BCM to our facility. Ensure your contact information is accurate for this crucial step.
6. Receive Your Programmed BCM: Once we receive your original unit, we will clone its data onto your replacement BCM and ship it back to you. Tracking information will be provided.
7. Install the New BCM: Secure the programmed replacement BCM in its mounting location and reconnect all electrical connectors firmly.
8. Reconnect Battery: Reattach the negative battery terminal.
9. Perform Post-Installation Procedures: This is critical! After replacing your BCM, important steps must be taken to ensure proper functionality:
   • Resetting the Airbag Warning Light: Perform the ‘Setup SDM Primary Key in BCM’ procedure using a qualified diagnostic tool to reset the airbag warning light.
   • Brake Pedal Recalibration: Some vehicles may require a brake pedal recalibration after BCM replacement. This ensures optimal braking performance and safety.

   Note: The specific steps may vary depending on your vehicle, so it is advisable to consult your vehicle’s manual or seek assistance from a professional technician if you are unsure about any procedure.

10. Test All Functions: Verify that all previously affected systems (lights, windows, locks, etc.) are now operating correctly.

From the Diagnostic Bay: A BCM Success Story

Just last month, a 2014 Chevy Cruze rolled into my shop. The owner was at her wit’s end; her power windows were dead, the dashboard was lit up like a Christmas tree with various warning lights, and the car intermittently refused to start. My scanner pulled a U0140 code, indicating lost communication with the BCM, alongside a B0001 for the airbag system. After confirming power and ground to the module, it was clear the BCM itself was failing internally. We explained our cloning service, and within a week, the pre-programmed BCM arrived. Installation was straightforward, and after performing the SDM primary key setup and a quick brake pedal recalibration, every system came back online. The customer was thrilled to have her car back, and it reinforced for me the value of a properly programmed replacement BCM.

Extensive Compatibility: Will This BCM Fit Your Vehicle?

This Body Control Module is designed to fit a wide range of GM vehicles, ensuring broad applicability for various models experiencing BCM-related issues. Please cross-reference your existing part number and vehicle details to confirm fitment. This BCM is compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325.

This part will fit these makes and models with these options:

• EQUINOX 2013-2017 Body Control (BCM); (LH side dash), body control
• VOLT 2013 Body Control (BCM); (RH engine compartment), ID 13580697
• CRUZE 2014-2015 Body Control (BCM); (LH kick panel)
• ENCORE 2013-2014 Body Control (BCM); (LH side of dash)
• MALIBU 2013 Body Control (BCM); (LH kick panel)
• REGAL 2013 Body Control (BCM); (LH dash)
• SRX 2013 Body Control (BCM); (LH dash)
• SPARK 2014-2015 Body Control (BCM); (left lower a-pillar), gasoline model
• ORLANDO 2013-2014 Body Control (BCM); (below center console)
• VERANO 2013-2017 Body Control (BCM); (below center of dash)
• CRUZE 2016 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
• TRAX 2013-2014 Body Control (BCM); (LH side of dash)
• VOLT 2013 Body Control (BCM); (RH engine compartment), ID 13586273
• CRUZE 2013 Body Control (BCM); (LH kick panel), w/o opt ATH
• TERRAIN 2013-2017 Body Control (BCM); (LH side dash), body control

Don’t let a faulty BCM keep you off the road. Our pre-programmed 2013 Regal BCM and our comprehensive support make this complex repair straightforward. Trust in our expertise to provide a reliable solution that gets your vehicle’s electrical systems functioning as they should. Get your vehicle back to full health today!