Restore Your Vehicle’s Electrical Functions with a Plug-and-Play Solution
Are you battling frustrating electrical gremlins in your Chevrolet Malibu or another compatible GM vehicle? Issues like flickering lights, malfunctioning power windows, a dead instrument cluster, or a car that won’t start can often be traced back to a single component: the Body Control Module (BCM). The BCM acts as the central hub for your car’s body electronics, and when it fails, it can cause a cascade of confusing and disruptive problems. Instead of facing a costly trip to the dealership for a new module and expensive programming, our professional cloning service provides a simple, effective, and affordable solution.
This service is for a replacement BCM that is professionally programmed with the exact data from your vehicle’s original module. This ensures a seamless, plug-and-play installation. We transfer your vehicle’s VIN, security information, and specific electronic settings, eliminating the need for any additional programming or calibration with dealership tools. It’s the most reliable way to get your car back to 100% functionality without the typical hassle.
From the Diagnostic Bay
We once had a 2013 Chevy Equinox come in with a persistent parasitic battery drain. The owner had already replaced the battery twice and the alternator once, but the car would still be dead after sitting for a day. After hours of tracing circuits, we found the BCM was failing to put the interior lighting circuit to sleep after the car was turned off. It was a subtle fault that didn’t throw any codes but was costing the owner a fortune in parts. A programmed replacement 2013 Malibu BCM (which shares the same architecture) solved the problem instantly. It’s a reminder that complex electrical issues often stem from the vehicle’s central computer.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The security system acting erratically, preventing the car from starting (anti-theft light on).
- ✔ Inaccurate or dead gauges on the instrument cluster.
- ✔ Malfunctioning radio, climate control, or windshield wipers.
- ✔ Unexplained battery drain that kills the battery overnight.
- ✔ Communication error codes with other modules (U-codes).
How Our BCM Programming Service Works
Our process is designed to be as simple and straightforward as possible for you. We handle all the technical work, so you receive a part that’s ready for installation right out of the box.
- Place Your Order: Complete your purchase through our secure website.
- Receive Instructions: We will contact you via email with detailed instructions on how to safely remove and ship your original BCM to our facility. Please ensure your contact information is correct at checkout.
- We Program Your Replacement: Once we receive your original module, our technicians will use specialized equipment to extract all the critical vehicle data and flash it onto the replacement unit.
- Receive Your Plug-and-Play BCM: We ship the fully programmed replacement BCM back to you. You will receive tracking information as soon as it’s on its way. Installation is as simple as disconnecting the old module and plugging in the new one.
Post-Installation Procedures
In most cases, the installation is 100% plug-and-play. However, due to the complex nature of modern vehicle systems, some models may require a simple relearn procedure. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This syncs the airbag system with the BCM and can be performed by a qualified shop with a professional-grade scan tool.
- Brake Pedal Position Relearn: On some vehicles, a brake pedal position sensor recalibration may be necessary to ensure proper brake light operation and traction control functionality.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Guaranteed Fitment for Your Vehicle
This 2013 Malibu BCM is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify your part number is on this list or that your vehicle is listed below.
Compatible Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options:
- CHEVROLET CRUZE 2013 (Body Control, LH kick panel, w/o opt ATH)
- CHEVROLET CRUZE 2014-2015 (Body Control, LH kick panel)
- CHEVROLET CRUZE 2016 (Body Control, LH kick panel, VIN P, Limited)
- CHEVROLET EQUINOX 2013-2017 (Body Control, LH side dash)
- CHEVROLET MALIBU 2013 (Body Control, LH kick panel)
- CHEVROLET ORLANDO 2013-2014 (Body Control, below center console)
- CHEVROLET SPARK 2014-2015 (Body Control, left lower a-pillar, gasoline model)
- CHEVROLET TRAX 2013-2014 (Body Control, LH side of dash)
- CHEVROLET VOLT 2013 (Body Control, RH engine compartment, ID 13580697 or 13586273)
- BUICK ENCORE 2013-2014 (Body Control, LH side of dash)
- BUICK REGAL 2013 (Body Control, LH dash)
- BUICK VERANO 2013-2017 (Body Control, below center of dash)
- CADILLAC SRX 2013 (Body Control, LH dash)
- GMC TERRAIN 2013-2017 (Body Control, LH side dash)
Frequently Asked Questions
What is a BCM and what does it do?
The Body Control Module (BCM) is a computer that manages many of your vehicle’s non-engine related functions. This includes power windows, locks, interior and exterior lighting, the security system, climate controls, and more. It’s the command center for passenger comfort and convenience features.
Why do I need to send you my original BCM?
Your original BCM contains vital, vehicle-specific data, including the VIN, security key codes, and settings for the options your car was built with. By cloning this data to the replacement module, we create a true plug-and-play part, saving you from a costly and complicated programming procedure at a dealership.
Is this a plug-and-play solution?
Yes, in over 99% of cases, it is completely plug-and-play. Because we transfer all data from your original module, the replacement BCM is ready to be installed and function immediately. In rare cases, a minor relearn procedure like for the airbag system may be needed, as noted in the description.
How long does the cloning service take?
The programming process is typically completed within 1-2 business days of us receiving your original module. We then ship the programmed replacement back to you promptly.
What if my original BCM is completely dead or unreadable?
In cases where the original module has severe water damage, fire damage, or a corrupted processor, we may not be able to retrieve the data. Please contact us before ordering if you suspect your module is unreadable. We have alternative solutions for many situations.
Do I have to pay a core charge?
No, there is no core charge for this service. You are not required to return the replacement module’s original core. You only need to send us your original BCM for the data cloning service.