Restore Your Vehicle’s Electrical System with a Plug-and-Play Solution
Are you dealing with baffling electrical issues in your car? Flickering lights, malfunctioning power windows, a security system that acts up, or a dashboard that resembles a Christmas tree? These are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can cause widespread and frustrating problems. The dealership solution often involves a brand-new module and several hours of expensive programming. We offer a smarter, more efficient alternative.
This is a comprehensive cloning service for your 2013 Malibu BCM. Instead of you needing to find a specialist with expensive tools, we handle the technical work. You simply send us your original BCM, and we transfer all of its critical data—including VIN, mileage, and key information—to this fully tested replacement unit. The result? A module that is 100% plug-and-play, ready to install the moment you receive it. Get your car back to normal without the dealership headache.
A Technician’s Notebook
I remember a 2013 Malibu that came into my bay with a laundry list of complaints from the owner. The radio would turn on and off by itself, the driver’s side window wouldn’t go down, and the remote key fob worked only intermittently. The customer had already replaced the battery and checked fuses, but the gremlins persisted. After hooking up my scan tool, I saw a slew of U-codes, specifically a U0140 (Lost Communication with Body Control Module). This pointed directly to the BCM as the culprit. Instead of a costly new unit and programming, we used a cloning service just like this one. The customer mailed in their module, got the cloned replacement back in a few days, and installed it in their driveway. The car was fixed for a fraction of the dealership’s quote, and all those bizarre electrical issues vanished instantly.
Is Your Vehicle Showing These Symptoms?
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors not working correctly.
- ✔ The anti-theft or security system light is on, preventing the car from starting.
- ✔ False warnings appearing on the instrument cluster (e.g., “Service Airbag”).
- ✔ Communication errors with other modules, often indicated by U-series diagnostic trouble codes (DTCs).
- ✔ Intermittent failure of the horn, wipers, or climate control functions.
A Straightforward Guide to Installation
- ✔ Safety First: Always disconnect the negative terminal from your vehicle’s battery before beginning any work on the electrical system.
- ✔ Locate the BCM: On the 2013 Chevrolet Malibu, the Body Control Module is typically located behind the driver’s side kick panel, near the fuse box. You may need to remove a plastic trim panel to access it.
- ✔ Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- ✔ Install the Replacement: Mount the new, cloned BCM in the same location and securely reconnect all the electrical connectors. You should hear a ‘click’ as they lock into place.
- ✔ Final Steps: Reinstall any trim panels you removed and reconnect the negative battery terminal. Start the vehicle to confirm that the issues are resolved.
Post-Installation Checks
Because this module is a direct clone of your original, most vehicles will not require any additional procedures. However, in some cases, you may need to perform a simple relearn. Please note the following:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure may be needed. This requires a professional-grade scan tool to sync the modules and clear the light.
- Brake Pedal Position Relearn: On certain models, a brake pedal position sensor recalibration might be necessary to ensure the brake lights and traction control system function properly.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Verified Vehicle Compatibility
This BCM is a direct fit for modules with part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It is compatible with the following vehicles and options:
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (Gasoline)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013 (ID 13580697 or 13586273)
- GMC Terrain: 2013-2017
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- Cadillac SRX: 2013
Frequently Asked Questions
How does this cloning service work?
It’s simple. After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the unique data and transfer it to the replacement module. We then ship both your original module and the ready-to-install replacement back to you.
Is this really plug-and-play?
Yes. Because we clone the data from your original module, the replacement BCM is recognized by your vehicle’s computer system as the original part. This eliminates the need for expensive dealer programming or key relearning procedures.
Do I get my old BCM back?
Absolutely. We always return your original module along with the programmed replacement. We do not keep customer cores.
What if the airbag light comes on after I install it?
In some instances, the BCM and the airbag module (SDM) may need to be re-synchronized. This is a simple procedure called ‘Setup SDM Primary Key in BCM’ that can be performed by any professional shop with a compatible scan tool.
How do I know if my BCM is the problem?
Common symptoms include multiple, unrelated electrical failures like erratic lights, power lock/window issues, and security system faults. A diagnostic scan showing communication codes (U-codes) related to the BCM is a strong indicator.