Restore Your Vehicle’s Electrical System with a Perfectly Matched BCM
Are you dealing with baffling electrical issues in your 2013 Chevrolet Malibu or other GM vehicle? Flickering lights, unresponsive power windows, a security system that won’t cooperate, or even a car that refuses to start can all point to a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can create a cascade of frustrating and unpredictable problems. Instead of facing a costly trip to the dealership for diagnostics and programming, we offer a streamlined, reliable solution.
This service provides you with a replacement BCM, precisely programmed with your vehicle’s original data. The process is simple: after your purchase, you’ll ship your original BCM to our facility. Our expert technicians will then transfer all the critical information—including VIN, mileage, and key data—to a fully tested replacement module. We then ship the ready-to-install BCM back to you. This cloning service ensures seamless integration, making the installation process as close to plug-and-play as possible.
A Technician’s Notebook: The Malibu with a Mind of Its Own
I remember a 2013 Malibu that came into the shop with a list of symptoms that sounded like a haunting. The owner said the dome lights would pulse randomly, the radio would shut off, and occasionally, the turn signals wouldn’t work. He’d already replaced the battery and checked the main grounds. Diagnostic scans showed a slew of communication errors (U-codes), all pointing to network chaos. This is a classic sign of a BCM that’s failing internally. Instead of a new, unprogrammed module that would require hours of dealer-level setup, we used a cloned unit. The owner mailed in his old BCM, we transferred the data, and sent the replacement back. He installed it in his driveway in under an hour, and just like that, the electrical gremlins were gone. It’s a perfect example of how a precisely programmed module is the most effective fix.
Common Signs of a Failing BCM
If your vehicle is experiencing any of the following, a faulty BCM could be the culprit. A failing module often triggers communication-related Diagnostic Trouble Codes (DTCs).
- ✔ Intermittent or non-working power windows, door locks, or interior lights.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Security system warning lights illuminated or vehicle refusing to start due to anti-theft issues.
- ✔ Dashboard warning lights appearing and disappearing without reason.
- ✔ Communication error codes, such as U0140, U0155, or U0100, stored in the system.
- ✔ Wipers or other accessories activating on their own.
Your Straightforward Path to a Reliable Fix
- ✔ Step 1: Purchase the ServiceComplete your order. We will contact you with detailed instructions and the shipping address for sending us your original BCM. Please ensure your contact information is accurate.
- ✔ Step 2: Ship Your Original ModuleCarefully package and ship your original BCM to our facility. We recommend using a tracked shipping service.
- ✔ Step 3: We Program Your ReplacementOnce we receive your module, our technicians will perform the data transfer to the replacement BCM, typically within 1-2 business days.
- ✔ Step 4: Install Your Plug-and-Play ModuleWe ship the programmed BCM back to you. Simply disconnect your battery, swap the modules, and reconnect. No dealership visit required!
Important Post-Installation Information
In most cases, this module is a direct-fit solution. However, due to variations in vehicle systems, a couple of minor procedures might be necessary after installation:
- Airbag System Sync: If the airbag (SRS) light is on after installation, a technician will need to perform the “Setup SDM Primary Key in BCM” procedure with a compatible scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor relearn to ensure the brake lights and traction control system function correctly. This is also done with a professional diagnostic tool.
- Disclaimer: Always consult a factory service manual or a qualified professional for vehicle-specific procedures.
Verified Vehicle Compatibility
This BCM is compatible with a wide range of GM vehicles. Please match your part number to the list below. The location of the BCM is noted for each model.
Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (Limited, VIN P) – (LH kick panel)
- Chevrolet Equinox: 2013-2017 – (LH side dash)
- Chevrolet Malibu: 2013 – (LH kick panel)
- Chevrolet Orlando: 2013-2014 – (Below center console)
- Chevrolet Spark: 2014-2015 (Gasoline) – (Left lower A-pillar)
- Chevrolet Trax: 2013-2014 – (LH side of dash)
- Chevrolet Volt: 2013 – (RH engine compartment)
- Buick Encore: 2013-2014 – (LH side of dash)
- Buick Regal: 2013 – (LH dash)
- Buick Verano: 2013-2017 – (Below center of dash)
- Cadillac SRX: 2013 – (LH dash)
- GMC Terrain: 2013-2017 – (LH side dash)
Frequently Asked Questions
What exactly is BCM cloning?
BCM cloning is the process of transferring all the essential vehicle-specific data (like the VIN, security information, and optional features) from your original Body Control Module to a replacement unit. This makes the new module a perfect electronic match for your car, avoiding the need for expensive dealership programming.
Why do I have to send my original BCM?
Your original BCM holds the unique digital fingerprint of your vehicle. By sending it to us, you enable us to create an exact copy on the replacement module. This is the key to our plug-and-play solution and is far more reliable than programming from scratch.
What if my original BCM is completely dead or non-communicative?
Even if your BCM isn’t communicating with the vehicle, in most cases, our technicians can still directly access the memory chip and extract the necessary data. Please contact us if you believe your module is severely damaged (e.g., by fire or water).
How long does the entire process take?
Once we receive your module, the programming and testing process typically takes 1-2 business days. The total turnaround time will depend on shipping speeds to and from our facility. We ship the programmed module back to you promptly and provide tracking information.
Is this truly plug-and-play?
Yes, for the vast majority of vehicles. Because we clone your original data, the car recognizes the new BCM as its own. In rare cases, as mentioned above, a simple relearn procedure for the airbag or brake pedal sensor may be required, which can be done by any competent shop.
Is there a core charge?
No, there is no core charge for this service. You are welcome to keep your original module after our service is complete.