Is Your 2013 Dodge Dart Running Rough?
If your 2013 Dodge Dart with the 2.0L engine is experiencing frustrating issues like a persistent check engine light, stalling, poor fuel economy, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the central computer of your vehicle, responsible for managing everything from ignition timing and fuel injection to emissions and transmission shifting. When it fails, it can cause a wide range of confusing and unpredictable problems, leaving you stranded and facing a costly trip to the dealership. Don’t let a faulty computer dictate your car’s reliability. This direct-fit replacement 2013 Dart Engine Computer is the definitive solution to restore your vehicle’s performance and peace of mind.
From the Diagnostic Bay
We had a 2013 Dart 2.0L towed in last month that had every mechanic who looked at it stumped. The owner had already replaced the spark plugs, ignition coils, and even the fuel pump. The car would start intermittently, run terribly for a few minutes, and then stall. The check engine light would throw a cascade of seemingly unrelated codes—O2 sensor faults, misfire codes, and communication errors. After hours of tracing wires and checking sensors, we finally isolated the issue to the ECM. It was sending erratic signals to the rest of the system. Once we installed a pre-programmed replacement unit like this one, the car fired up instantly and ran as smoothly as the day it left the factory. All the phantom codes vanished. It’s a classic case of the ‘brain’ going bad and causing chaos everywhere else.
Common Symptoms of a Failing 2013 Dart ECM
- ✔ Persistent and illuminated Check Engine Light (CEL).
- ✔ Engine stalling, stumbling, or hesitating during acceleration.
- ✔ Noticeable decrease in fuel efficiency.
- ✔ The vehicle cranks but refuses to start.
- ✔ Rough or erratic idling.
- ✔ Automatic transmission shifting issues or harsh shifts.
- ✔ Loss of power and poor overall engine performance.
- ✔ Communication errors with diagnostic scan tools.
Why Choose Our Pre-Programmed 2013 Dart Engine Computer?
Getting your Dart back on the road shouldn’t be complicated or excessively expensive. Dealerships often require you to purchase a new module, pay for multiple hours of labor, and then charge a separate, hefty fee for programming. Our solution eliminates all that hassle. We take your vehicle’s unique Vehicle Identification Number (VIN) and current mileage at checkout and flash this information directly onto the module. This means the 2013 Dart Engine Computer arrives at your door ready for immediate installation. It’s a true plug-and-play fix that requires no additional programming or dealer intervention. Simply disconnect the negative battery terminal, swap the old module with your new one, reconnect the battery, and start your car. All the necessary vehicle-specific software and security information is already loaded, ensuring seamless integration with your Dart’s existing systems.
This module is a direct replacement for a range of part numbers, ensuring compatibility and proper function. It is compatible with the following part numbers: 5150688AD, 68185602AC, 68194773AA, 68194770AA, 68185613AC, 68185612AC, and 68141610AC. By matching one of these numbers, you can be confident you are ordering the correct component to resolve your vehicle’s issues.
Frequently Asked Questions
Is this engine computer really plug and play?
Yes, absolutely. We program the module with your car’s specific VIN and mileage before shipping it. This ensures that when you receive it, it’s ready for installation without any need for a trip to the dealer or a specialized mechanic for further programming.
What information do you need from me to program it?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your vehicle’s dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.
How do I know if my ECM is the problem?
While the symptoms listed above are strong indicators, the best way to be certain is through a proper diagnosis by a qualified technician. An ECM failure can often mimic other issues, such as a bad sensor or wiring problem. However, if you are experiencing multiple, seemingly unrelated electronic issues, the ECM is a primary suspect.
Where is the ECM located on a 2013 Dodge Dart?
On the 2013 Dodge Dart, the Engine Control Module is typically located in the engine bay, mounted near the battery or on the firewall. It is a metal box with several large electrical connectors. Always disconnect the battery before attempting to remove or install the ECM.
Will this work for a Dart with a different engine?
No, this specific module is programmed and configured for the 2013 Dodge Dart equipped with the 2.0L engine. Using it on a vehicle with a different engine (like the 1.4L Turbo or 2.4L) will result in improper operation.