Is Your 2013 Avenger or 200 Running Poorly? The Engine Computer Might Be the Culprit.
If you’re dealing with a persistent check engine light, erratic engine behavior, or a no-start condition in your 2013 Dodge Avenger or Chrysler 200, a failing Engine Control Module (ECM) is a very likely cause. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it fails, it can create a cascade of frustrating and difficult-to-diagnose problems. This isn’t just an inconvenience; it’s a critical component failure that can leave you stranded.
Instead of paying for expensive dealership diagnostics and programming fees, you can get a reliable, direct-fit solution. This replacement ECM is meticulously prepared to be a true plug-and-play module. We program it with your vehicle’s specific Vehicle Identification Number (VIN) and mileage before it ships, eliminating the need for any additional programming or trips to a mechanic. It’s designed to restore your vehicle’s original performance and reliability.
We had a 2013 Avenger come into the shop with a complaint of intermittent stalling at stoplights and a check engine light that would come and go. The owner had already replaced the spark plugs and an oxygen sensor with no luck. We scanned the system and found a slew of communication error codes (U-codes) along with a random misfire code. Instead of just throwing more parts at it, we focused on the communication errors. After checking the wiring harness and connectors for the ECM, we found no visible issues. As a final diagnostic step, we connected a known-good test ECM. The car ran perfectly for two days with no codes. The original module had an internal fault that only showed up when it reached operating temperature. Installing a pre-programmed 2013 Avenger Engine Computer like this one solved the problem permanently, saving the customer from further guesswork and unnecessary repairs.
Common Symptoms of a Failing 2013 Avenger ECM
- ✔ Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
- ✔ Engine stalling, stumbling, or hesitating during acceleration.
- ✔ Rough or erratic idling.
- ✔ A noticeable drop in fuel economy.
- ✔ The vehicle cranks but refuses to start.
- ✔ Communication error codes with diagnostic scan tools.
- ✔ Harsh or incorrect shifting from the 6-speed automatic transmission.
- ✔ Failure to pass an emissions test.
Simple Installation for Your 2013 Avenger Engine Computer
This module is engineered for a straightforward installation. Because we handle all the programming on our end, you won’t need any specialized tools or software. The process generally involves disconnecting the battery, locating and unplugging the old module, installing the new one, and reconnecting the battery. This simple swap restores the critical brainpower your vehicle needs to operate as it should. You get back on the road quickly and with confidence, knowing the core of your engine management system is sound.
Guaranteed Compatibility
This ECM is a direct replacement for 2013 Dodge Avenger and 2013 Chrysler 200 models equipped with the 2.4L engine and a 6-speed automatic transmission. It is compatible with a wide range of original part numbers, ensuring a perfect match for your vehicle. Please verify your part number against the list below to confirm fitment.
Compatible Part Numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Frequently Asked Questions
What information do you need to program this ECM?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This allows us to program the module specifically for your car, ensuring it is a true plug-and-play part.
Is this module really plug-and-play?
Yes. Because it arrives pre-programmed to your specific VIN, no further programming or flashing is required. Once installed, the vehicle’s keys will sync with the module, and it will function just like the original unit.
Where is the ECM located on a 2013 Dodge Avenger?
On the 2013 Dodge Avenger with the 2.4L engine, the ECM is typically located in the engine bay, mounted to the firewall or on one of the inner fender wells. It will have several large electrical connectors attached to it.
Will this fix my check engine light?
If the check engine light and associated symptoms are caused by a faulty ECM, this replacement part will solve the problem. However, it’s always recommended to have the vehicle properly diagnosed to ensure the ECM is the root cause before ordering.
Do I need to perform a security relearn procedure?
No. Our programming process ensures the module is synchronized with your vehicle’s existing security system. In most cases, you can simply install the module, and the car will start and run without any additional steps.