Is Your 2013 Avenger or 200 Running Rough?
If you’re experiencing baffling electrical issues, poor engine performance, or a persistent check engine light in your 2013 Dodge Avenger or Chrysler 200, the root cause might be a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it starts to fail, it can create a cascade of problems that are often difficult to diagnose, leading to frustrating and expensive trips to the mechanic.
Don’t let a faulty computer keep your car off the road. This replacement ECM is a reliable, direct-fit solution designed to restore your vehicle’s original performance and efficiency. We take the guesswork and complexity out of the repair by programming the module specifically to your vehicle’s VIN and mileage before it ships. This means no expensive trips to the dealership for programming—it arrives at your door ready for a simple, plug-and-play installation.
From the Diagnostic Bay
We had a 2013 Avenger come in with a no-start condition that had stumped two other shops. The owner had already replaced the battery, starter, and crankshaft position sensor based on their advice. After hooking up our diagnostic scanner, we noticed erratic data from multiple sensors and no communication with the transmission module. Instead of just throwing more parts at it, we checked the power and ground circuits to the ECM, which were solid. This pointed directly to an internal failure of the original computer. By installing a pre-programmed 2013 Avenger ECM, the car started on the first try and all communication was restored. It’s a classic case of symptoms pointing everywhere, but the real culprit being the brain of the operation.
Symptoms of a Failing 2013 Avenger ECM
A failing engine computer can manifest in various ways. If you’re noticing any of the following issues, it may be time to consider a replacement ECM:
- ✔ Unexplained Check Engine Light (CEL) that won’t clear or returns intermittently.
- ✔ Engine stalling, stumbling, or misfiring for no apparent reason.
- ✔ Drastic decrease in fuel economy.
- ✔ Harsh or erratic automatic transmission shifting.
- ✔ Complete no-start or no-crank condition.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Inconsistent performance that gets worse as the engine warms up.
The Plug-and-Play Solution
This isn’t just a part; it’s a complete solution. The primary hurdle in replacing a modern engine computer is the need for vehicle-specific software programming. Our service eliminates this completely. Simply provide your VIN during checkout, and our technicians will flash the module with the correct factory software for your 2013 Dodge Avenger or Chrysler 200. The module arrives ready to be installed, making this a straightforward DIY job for anyone with basic tools or a quick task for your trusted mechanic.
This module is a direct replacement for a wide range of original part numbers, ensuring broad compatibility. Please verify your original part number against the list below to confirm fitment.
Compatible Part Numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Vehicle Fitment:
- 2013 Dodge Avenger (with 2.4L Engine & 6-Speed Automatic Transmission)
- 2013 Chrysler 200 (with 2.4L Engine & 6-Speed Automatic Transmission)
Frequently Asked Questions
Do I need to have this ECM programmed by a dealer?
No. This engine computer comes fully programmed to your vehicle’s specific VIN. It is a plug-and-play installation, and no further programming or dealer visit is required.
What information do you need from me?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) to program the module correctly. Please provide this during the checkout process to ensure a seamless experience.
Is this a difficult part to install?
For someone with basic mechanical skills, the installation is straightforward. It typically involves disconnecting the battery, unplugging the electrical connectors from the old ECM, unbolting it, and then installing the new one in the reverse order. However, we always recommend consulting a service manual or a professional mechanic if you are unsure.
Will this fix my car’s specific problem?
This ECM will resolve issues directly caused by a faulty engine computer. While the symptoms listed are common indicators of ECM failure, it’s crucial to ensure your vehicle has been properly diagnosed. We recommend checking power, grounds, and sensor inputs before condemning your original ECM.
What is the warranty on this part?
This part comes with a standard warranty that covers defects in materials and workmanship. Please refer to our warranty page for specific details and duration.