Is Your Chevy Cruze Experiencing Strange Electrical Issues?
The Body Control Module (BCM) is the central command center for your vehicle’s electronic accessories. It manages everything from your power windows, door locks, and interior lights to the security system and keyless entry. When the BCM in your 2013 Cruze begins to fail, it can create a host of confusing and frustrating problems that can be difficult to diagnose. Instead of paying for expensive dealership diagnostics and programming, our mail-in programming service provides a simple, effective, and affordable solution.
From the Diagnostic Bay
We once had a 2013 Cruze come into the shop with a classic “parasitic draw” issue. The owner had already replaced the battery twice and the alternator once, but the battery would still be dead every few mornings. After hours of testing circuits, we traced the draw back to the BCM. It wasn’t fully going to “sleep” when the car was off, keeping other modules powered on and slowly draining the battery. A simple BCM replacement, cloned from his original, solved a problem that had cost him hundreds in unnecessary parts and endless frustration.
Common Symptoms of a Failing BCM
- ✔ Power windows or door locks working intermittently or not at all.
- ✔ Interior or exterior lights staying on, flickering, or not turning on.
- ✔ The security system engaging randomly or the alarm sounding for no reason.
- ✔ Key fob not responding or intermittent keyless entry function.
- ✔ Dashboard warning lights appearing erratically.
- ✔ Wipers or turn signals behaving unpredictably.
- ✔ A persistent battery drain that can’t be traced to other components.
The Simple, Plug-and-Play Solution: Our Programming Service
Don’t get stuck with a new or used module that requires a trip to the dealership for costly programming. Our specialized service makes this repair straightforward. We take a replacement BCM and transfer the precise data from your vehicle’s original module directly onto it. This cloning process includes the VIN, security information, and specific options for your car.
How Our Mail-In Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We’ll Contact You: We will reach out with clear, simple instructions for removing and shipping your original BCM to our facility.
- ✔ Send Us Your Module: Package your original BCM securely and ship it to us.
- ✔ The Magic Happens: Upon arrival, our technicians will professionally transfer all necessary data to the replacement module, typically within one business day.
- ✔ Receive Your Ready-to-Install BCM: We ship the programmed module back to you. Installation is as simple as plugging it in. No further programming is required.
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple sync procedure after the new module is installed. Please be aware of the following possibilities:
- Airbag System Sync: If your airbag warning light is illuminated after installation, a “Setup SDM Primary Key in BCM” procedure is needed. This syncs the new BCM with the airbag system and requires a professional-grade scan tool. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to satisfy the traction control system.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Guaranteed Compatibility
This service is a direct solution for the 2013 Cruze Body Control Module and is also compatible with a wide range of GM vehicles and part numbers. This module will fit the following part numbers: 13577850, 13505326, 13500384, 13574844, 13504004, 13504494, and 13578420.
Frequently Asked Questions
What is a BCM cloning service?
BCM cloning is a process where we extract the unique, vehicle-specific data from your original Body Control Module and write it onto a replacement module. This makes the replacement unit a plug-and-play part, eliminating the need for expensive dealership programming.
Do I need to program this module after I receive it?
No. The module you receive from us will be fully programmed with your car’s data. In most cases, you simply install it and you’re ready to go. Some vehicles may require minor relearn procedures as noted above.
What if my original BCM is completely dead or water damaged?
In many cases, even with significant damage, we can still recover the necessary data. Please contact us before ordering if your module has severe water or fire damage so we can discuss the likelihood of a successful data transfer.
How long does the entire process take?
Once we receive your original module, our service is typically completed within 24-48 hours. The total time will depend on the shipping speed you choose to send your module to us and for us to return it.
Is this service guaranteed to fix my vehicle’s problems?
This service guarantees that you will receive a functional, correctly programmed BCM. It will solve any issues directly caused by a faulty BCM. It’s crucial to ensure your vehicle has been properly diagnosed, as other components can sometimes cause similar symptoms.