Is Your 2013 Chrysler 200 or Avenger Running Poorly?
Dealing with a vehicle that hesitates, stalls, or won’t start can be incredibly frustrating. If your 2013 Chrysler 200 or Dodge Avenger is plagued by a persistent check engine light, erratic engine behavior, or strange transmission shifting, the root cause is often the vehicle’s central command center: the Engine Control Module (ECM). This component is the brain of your car, and when it fails, it can create a cascade of confusing and costly problems. Don’t let a faulty computer keep you off the road. This direct-fit, pre-programmed engine computer is the definitive solution to restore your vehicle’s performance and reliability.
The Critical Role of Your 2013 Chrysler 200 ECM
The ECM in your 2.4L Chrysler 200 or Dodge Avenger is responsible for managing a complex network of sensors and systems. It precisely controls fuel injection, ignition timing, transmission shift points, and emissions systems to ensure optimal power, efficiency, and smoothness. When this module begins to fail, the signals it sends become corrupted, leading to a wide range of symptoms that can be difficult to diagnose. Replacing it with a properly functioning unit is the only way to get your vehicle operating as the factory intended.
From the Diagnostic Bay
We had a 2013 Dodge Avenger come into the shop that was giving its owner a massive headache. The car would shift hard between first and second gear, and occasionally it would stall at a stoplight for no reason. The owner had already replaced the transmission fluid and a couple of sensors, but the problem persisted. When we connected our diagnostic scanner, we saw a U0100 code—Lost Communication with ECM. After checking the wiring and finding no issues, we knew the problem was internal to the module itself. We installed a pre-programmed 2013 Chrysler 200 ECM, and the car immediately ran perfectly. The shifting smoothed out, the stalling stopped, and the check engine light was gone for good. It’s a perfect example of how a failing ECM can masquerade as a mechanical transmission problem.
Common Symptoms of a Failing Engine Computer
- ✔ Persistent Check Engine Light that won’t clear or returns immediately.
- ✔ Engine misfires, stumbles, or runs rough at idle.
- ✔ Vehicle cranks but refuses to start.
- ✔ Unexplained drop in fuel mileage (MPG).
- ✔ Harsh or erratic automatic transmission shifting.
- ✔ The cooling fans run constantly or not at all.
- ✔ Loss of power and poor acceleration.
A True Plug-and-Play Solution
The biggest hurdle in replacing an ECM has always been the expensive and time-consuming programming required at a dealership. We eliminate that step entirely. Simply provide us with your vehicle’s Vehicle Identification Number (VIN) and current mileage during checkout, and we will flash the module for you. When it arrives, it is ready for immediate installation with no special tools or dealer visits required. This saves you time, money, and the hassle of towing your vehicle to a service center.
This ECM is a direct replacement for the following part numbers:
04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Guaranteed Fitment For:
- 2013 Chrysler 200 with 2.4L engine and 6-speed automatic transmission
- 2013 Dodge Avenger with 2.4L engine and 6-speed automatic transmission
Frequently Asked Questions
Is this ECM really plug-and-play?
Yes, absolutely. We program the module with your car’s specific VIN and mileage before it ships. This ensures that it will communicate perfectly with your vehicle’s other systems, including the ignition and anti-theft security. All you have to do is install it.
How do I know for sure that my ECM is the problem?
While the symptoms listed above are strong indicators, the best way to be certain is through a proper diagnosis from a qualified mechanic. Common diagnostic trouble codes (DTCs) pointing to a faulty ECM include P0600-P0606, P060A, or communication codes like U0100. If you’re experiencing multiple, unrelated error codes, it’s often a sign the ECM is failing.
What information do you need from me to program it?
We need your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your driver’s side dashboard (visible through the windshield) or on the driver’s side door jamb sticker. Please provide this information during the checkout process.
Will this fit my 2013 Dodge Avenger with the 2.4L engine?
Yes, this engine control module is compatible with both the 2013 Chrysler 200 and the 2013 Dodge Avenger, as long as your vehicle is equipped with the 2.4L engine and the 6-speed automatic transmission.
Do I need any special tools for installation?
No special tools are required. Basic hand tools like a socket set will be sufficient to remove the old module and install the new one. The most important step is to disconnect the vehicle’s battery before you begin the swap to prevent any electrical damage.