Is Your 2013 Dodge Caravan or Chrysler Town & Country Running Poorly?
Dealing with a minivan that’s stalling, hesitating, or showing a persistent check engine light can be incredibly frustrating. The Engine Control Module (ECM), the central computer for your vehicle’s engine, is often the culprit behind these perplexing issues. When the ECM fails, it can disrupt everything from fuel delivery and ignition timing to transmission shifting, leaving you with an unreliable vehicle. This replacement Engine Control Module is the definitive solution to restore your minivan’s performance and dependability.
From the Diagnostic Bay
We once had a 2013 Caravan come in that had its owner at his wit’s end. He’d replaced the crankshaft position sensor, camshaft sensors, and even the throttle body based on a series of confusing trouble codes. The van would run fine for a day, then suddenly stall at a stoplight. After confirming the new sensors were good, we hooked up our diagnostic scope to the ECM outputs. We found the signal to the fuel injectors was dropping out intermittently. The root cause wasn’t the sensors, but the ECM itself failing internally. Installing a pre-programmed module like this one resolved all the issues instantly, saving him from any more guesswork and unnecessary parts expenses.
Common Symptoms of a Failing 2013 Caravan ECM
- âś” Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
- âś” The engine cranks but refuses to start.
- âś” Unexplained stalling, especially when coming to a stop or at idle.
- âś” Noticeable loss of engine power and poor acceleration.
- âś” A sudden drop in fuel efficiency.
- âś” Harsh or erratic automatic transmission shifting.
- âś” Communication errors when trying to read codes with a scan tool.
The Plug-and-Play Solution You Need
The biggest hurdle in replacing an engine computer is the need for expensive, dealer-specific programming. Our modules eliminate that step entirely. We flash this ECM with your vehicle’s specific Vehicle Identification Number (VIN) and current mileage before it ships. When it arrives, the process is straightforward: disconnect the battery, swap the old module with the new one, and reconnect the battery. There’s no need for a tow to the dealership or any additional programming. It’s designed to be a direct, hassle-free installation.
This unit is a direct replacement for a wide range of part numbers, ensuring compatibility and proper function. It is compatible with the following part numbers: 05150724AC, 68164371AA, 68164371AB, 68164371AC, 68164371AD, 68164371AE, 68164371AF, 68164370AA, 68164370AB, 68164370AC, 68164370AD, 68164370AE, 68164370AF, 68164369AA, 68164369AB, 68164369AC, 68164369AD, 68164369AE, 68164369AF.
Vehicle Fitment:
- 2013 Dodge Grand Caravan with 3.6L Engine
- 2013 Chrysler Town & Country with 3.6L Engine
Frequently Asked Questions
What does “Plug & Play” mean for this ECM?
“Plug & Play” means the module arrives at your door fully programmed to your vehicle’s specific VIN and mileage. You simply need to install it, and it will work immediately without any need for a trip to the dealership or a specialized mechanic for further programming.
What information do I need to provide for programming?
After you place your order, we will need your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures the ECM is a perfect match for your vehicle’s factory settings and security system.
Will this ECM fix my specific problem?
This module is designed to fix problems directly caused by a faulty ECM. While the symptoms listed are common indicators of ECM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the ECM is the root cause before ordering.
Is this compatible with my 2013 Chrysler Town & Country?
Yes, this Engine Control Module is fully compatible with the 2013 Chrysler Town & Country equipped with the 3.6L engine, in addition to the 2013 Dodge Grand Caravan.
Do I need to perform a security relearn or key programming?
No. Because we program the module to your VIN, it will recognize your existing keys and security system. No key programming or security relearn procedures are necessary.