Restore Full Electrical Function to Your 2013 Buick Regal
Is your 2013 Buick Regal experiencing bizarre electrical issues? Flickering lights, malfunctioning power windows, or random warning indicators on your dashboard are common signs of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it fails, it can cause a wide range of frustrating and unpredictable problems. This replacement BCM, part number 13586273, is the definitive solution to restore your vehicle’s stability and functionality.
The Simple, Dealer-Free Solution: Our Cloning Service
Replacing a BCM isn’t as simple as swapping the part. Modern vehicles require the BCM to be programmed specifically to your car’s Vehicle Identification Number (VIN) and its unique options. A trip to the dealership for this service can be incredibly expensive and time-consuming. We eliminate that hassle with our professional mail-in cloning service. You simply send us your original BCM, and we transfer all the critical data—including VIN, mileage, and key programming—to this replacement unit. When you receive it back, it’s a true plug-and-play installation, ready to go with no additional programming required.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, and interior/exterior lights.
- ✔ The security or anti-theft system light stays on, preventing the car from starting.
- ✔ Unexplained battery drain when the vehicle is off.
- ✔ Erratic behavior from the dashboard gauges or instrument cluster.
- ✔ Horn, wipers, or other accessories activating on their own or not at all.
- ✔ Communication errors when trying to scan the vehicle with a diagnostic tool.
Why Our 2013 Regal Body Control Module Service is the Best Choice
Choosing our service for your 2013 Regal Body Control Module means you’re getting more than just a part; you’re getting a comprehensive, hassle-free solution. We handle the complex programming so you don’t have to. This process ensures that all vehicle systems communicate correctly, preserving factory settings and functionality. By cloning your original data, we bypass the need for expensive key reprogramming and other system initializations that a new, unprogrammed module from the dealer would require.
Post-Installation Procedures
While our goal is a seamless plug-and-play experience, certain vehicle systems may require a recalibration after the BCM is installed. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light operation and traction control system performance.
Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Fitment
This BCM is a direct replacement for the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325. It is compatible with a wide range of GM vehicles, including:
This part will fit these makes and models with these options
EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697
CRUZE 14-15 Body Control (BCM); (LH kick panel)
ENCORE 13-14 Body Control (BCM); (LH side of dash)
MALIBU 13 Body Control (BCM); (LH kick panel)
REGAL 13 Body Control (BCM); (LH dash)
SRX 13 Body Control (BCM); (LH dash)
SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
ORLANDO 13-14 Body Control (BCM); (below center console)
VERANO 13-17 Body Control (BCM); (below center of dash)
CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
TRAX 13-14 Body Control (BCM); (LH side of dash)
VOLT 13 Body Control (BCM); (RH engine compartment), ID 13586273
CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Frequently Asked Questions
What exactly is a BCM cloning service?
Cloning is the process of reading the essential software and vehicle-specific data (like VIN, mileage, and key information) from your original BCM and writing it directly onto the replacement module. This makes the replacement an exact digital copy of your original, ensuring a plug-and-play installation without needing dealer programming.
Why do I have to send you my original BCM?
Your original BCM contains the unique data that is essential for your car to function correctly. Without it, we cannot program the replacement module to match your vehicle’s specific configuration. This is the key to avoiding expensive and complex programming at a dealership.
Is this part difficult to install?
The physical installation is typically straightforward for someone with basic mechanical skills. The BCM is usually located under the dashboard on the driver’s or passenger’s side. Once you locate it, it’s a matter of disconnecting the battery, unplugging the electrical connectors, and unbolting the module. Our programming service handles the difficult software side of the job.
How long does the entire process take?
Once we receive your original module, our programming service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with a return tracking number as soon as your programmed module is on its way back to you.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is failing, we can still extract the necessary data. If your module is severely damaged (e.g., by water or fire), data recovery may not be possible. Please contact us before ordering if you suspect your module is completely non-communicative.