Is Your 2013 Regal Plagued by Electrical Gremlins?
The Body Control Module (BCM) is the central nervous system for your Buick Regal’s electronic accessories. It manages everything from your power windows and locks to the interior lighting, security system, and even turn signals. When the BCM starts to fail, it can create a cascade of confusing and frustrating issues that can seem unrelated. If your vehicle is behaving erratically, a faulty BCM is a very likely culprit.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights staying on, flickering, or not working at all.
- ✔ The security system acting up, causing alarm issues or no-start conditions.
- ✔ Erratic behavior from the radio or instrument cluster gauges.
- ✔ False warning lights appearing on the dashboard (e.g., airbag, ABS).
- ✔ Wipers or turn signals operating incorrectly or not at all.
The Simple, No-Dealer-Visit Solution: Our Programmed 2013 Regal BCM
Forget expensive dealership visits, towing fees, and complex programming procedures. We offer a streamlined solution to get your Buick back on the road quickly. This listing is for a replacement BCM that comes fully programmed with your vehicle’s original data. We achieve this through a process called cloning, where we transfer the critical information from your original BCM directly onto the replacement unit. The result is a true plug-and-play module that is ready for installation right out of the box.
How Our Programming Service Works:
- ✔ Place Your Order: Complete your purchase for this BCM. Ensure your contact information is accurate.
- ✔ We Contact You: We will reach out with simple, clear instructions on how to ship your original BCM to our facility.
- ✔ We Program Your Part: Once we receive your original module, our technicians will professionally transfer all necessary data to the replacement unit. This typically takes 1-2 business days.
- ✔ We Ship It Back: We ship the programmed replacement BCM back to you. You will receive tracking information as soon as it’s on its way.
Post-Installation Procedures
While our goal is a seamless plug-and-play experience, some GM vehicles may require minor recalibration procedures after the new BCM is installed. These are typically simple and can be performed with a capable diagnostic scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and to prevent issues with the traction control system.
Please Note: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Vehicle and Part Number Compatibility
This BCM is a direct fit for multiple GM vehicles and is compatible with the following part numbers:
Part Numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, 13589325
This part will fit these makes and models with these options:
- BUICK ENCORE 13-14 Body Control (BCM); (LH side of dash)
- BUICK REGAL 13 Body Control (BCM); (LH dash)
- BUICK VERANO 13-17 Body Control (BCM); (below center of dash)
- CADILLAC SRX 13 Body Control (BCM); (LH dash)
- CHEVROLET CRUZE 13 Body Control (BCM); (LH kick panel), w/o opt ATH
- CHEVROLET CRUZE 14-15 Body Control (BCM); (LH kick panel)
- CHEVROLET CRUZE 16 Body Control (BCM); (LH kick panel), VIN P (4th digit, Limited)
- CHEVROLET EQUINOX 13-17 Body Control (BCM); (LH side dash), body control
- CHEVROLET MALIBU 13 Body Control (BCM); (LH kick panel)
- CHEVROLET ORLANDO 13-14 Body Control (BCM); (below center console)
- CHEVROLET SPARK 14-15 Body Control (BCM); (left lower a-pillar), gasoline model
- CHEVROLET TRAX 13-14 Body Control (BCM); (LH side of dash)
- CHEVROLET VOLT 13 Body Control (BCM); (RH engine compartment), ID 13580697 or 13586273
- GMC TERRAIN 13-17 Body Control (BCM); (LH side dash), body control
Frequently Asked Questions
What does ‘cloning’ or ‘programming’ mean?
It means we transfer the unique data from your original BCM—like the VIN, mileage, and security information—to the replacement module. This makes the new part a perfect match for your car, eliminating the need for dealer programming.
Do I need to send my original BCM?
Yes. We must have your original module in order to extract the data needed to program the replacement. This is what makes the final product plug-and-play.
How long does the entire process take?
Once we receive your module, the programming service itself takes 1-2 business days. The total time will depend on shipping times to and from our facility.
Is this part difficult to install?
The BCM is typically located under the driver’s or passenger’s side dashboard. Physical installation is usually straightforward, involving disconnecting the battery and swapping the module. The key benefit of our service is that no complex computer work is needed after installation.
What if my original BCM is completely dead or not communicating?
In many cases, we can still extract the necessary data even from a non-communicating module. Please contact us before ordering if your module is severely damaged (e.g., by fire or water) to discuss options.