Is Your 2013 Dodge Avenger or Chrysler 200 Running Rough?
If your vehicle is experiencing perplexing issues like stalling, erratic shifting, a persistent check engine light, or a complete no-start condition, the root cause might be its most critical component: the Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it fails, it can create a cascade of problems that are often misdiagnosed, leading to costly and unnecessary repairs of other components. Don’t let a faulty computer keep you off the road. This direct-fit, pre-programmed engine computer is the definitive solution to restore your vehicle’s performance, reliability, and efficiency.
From the Diagnostic Bay
We had a 2013 Avenger come into the shop with a classic complaint: intermittent stalling at stoplights and a check engine light with a code for a faulty camshaft position sensor. The owner had already replaced the sensor twice with no luck. After hooking up our diagnostic scanner and monitoring live data, we noticed the sensor readings were dropping out randomly, but the sensor’s wiring and voltage were perfect. This pointed us directly to the processor inside the ECM. A failing driver in the computer was unable to consistently interpret the sensor’s signal, causing the engine to stall. We installed one of our pre-programmed ECMs, and the problem was solved instantly. It’s a textbook example of how a failing ECM can send you chasing ghosts, and why replacing the computer is often the correct, final repair.
Why Choose Our Pre-Programmed 2013 Avenger Engine Computer?
The biggest hurdle in replacing a modern vehicle’s computer is the complex programming required to sync it with your car’s specific Vehicle Identification Number (VIN) and security systems. Our solution eliminates this obstacle entirely. We handle all the programming for you before the part ever leaves our facility. When you receive your 2013 Avenger Engine Computer, it is 100% plug-and-play. There is no need for an expensive trip to the dealership or a specialized mechanic for programming. Simply install the unit, and your car will start and run correctly, recognizing the new module as its own.
Common Symptoms of a Failing ECM
- ✔ Persistent Check Engine Light (CEL) that won’t clear.
- ✔ Engine stalling or shutting off unexpectedly while driving.
- ✔ Rough or erratic idling.
- ✔ Difficulty starting the engine or a complete no-start condition.
- ✔ Noticeable decrease in fuel economy.
- ✔ Poor engine performance, including hesitation or lack of power.
- ✔ Harsh or incorrect automatic transmission shifting.
- ✔ Communication errors with diagnostic scan tools.
Guaranteed Fitment and Compatibility
This Engine Control Module is a direct replacement for 2013 Dodge Avenger and 2013 Chrysler 200 models equipped with the 2.4L engine and 6-speed automatic transmission. It is fully compatible with a wide range of original part numbers, ensuring a perfect match for your vehicle. Please verify your part number against the list below to confirm compatibility.
Compatible Part Numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Simple Installation Process
Installing your new ECM is a straightforward process that can be completed with basic hand tools. While we always recommend professional installation if you’re not comfortable, many DIY enthusiasts can perform the swap themselves.
- Safety First: Disconnect the negative terminal from your vehicle’s battery.
- Locate the ECM: On the 2013 Avenger, the ECM is typically located in the engine bay, mounted to the firewall or inner fender.
- Disconnect Connectors: Carefully release the locking tabs and unplug the electrical wiring harnesses from the old module.
- Remove the Old Unit: Unbolt the old ECM from its mounting bracket.
- Install the New ECM: Mount your new, pre-programmed ECM in place and tighten the bolts.
- Reconnect Everything: Plug the wiring harnesses firmly into the new module until they click, and reconnect the battery terminal.
- Start the Vehicle: Your car is now ready to start with its new brain fully integrated.
By choosing this pre-programmed 2013 Avenger Engine Computer, you are not just buying a part; you are buying a complete, hassle-free solution that gets your vehicle back to factory-spec performance without the dealership’s high costs and complexities.
Frequently Asked Questions
What exactly does the Engine Control Module (ECM) do?
The ECM, or engine computer, is the main processor for your vehicle. It takes in data from sensors all over the engine and drivetrain, then uses that information to control fuel delivery, spark timing, transmission shifts, and emissions systems to ensure the vehicle runs efficiently and smoothly.
Is this part truly ‘Plug & Play’?
Yes. We program the module to your vehicle’s specific VIN and mileage before shipping it to you. This means no additional programming or dealer visits are required. You can install it, and the car will start and run correctly.
Where is the ECM located on my 2013 Dodge Avenger?
On most 2013 Dodge Avengers and Chrysler 200s with the 2.4L engine, the ECM is found in the engine compartment. It is typically a silver metal box with multiple large electrical connectors, often mounted against the firewall or on one of the shock towers.
How can I be sure the ECM is the actual problem?
While the symptoms listed are strong indicators, a definitive diagnosis is best. This usually involves a professional mechanic using a scan tool to check for specific ECM-related trouble codes (like P0600-P0606) and to rule out issues with wiring, sensors, or other components.
Do I need to send my old computer back?
This purchase does not require you to return your original module. There is no core charge associated with this part, allowing you to complete your repair without the extra step of shipping your old unit back.